This boat has been sold but check out these similar boats nearby

1–5/50

2012 Beneteau Oceanis ICW Sold Boat in Charlotte Harbor, FL 34240-7823 US

$149,900

Used
We will let you know when another 2012 Beneteau Oceanis ICW is available in Charlotte Harbor, FL
builtBuilt in 2012
Year the boat was built
model

Oceanis ICW

Boat model
engine

--

Engine type and count
length

45 feet

Overall boat length
fuel

--

Fuel type
material

Fiberglass/Reinforced

Hull material

Boats For Sale in Florida, United States Similar to the 2012 Beneteau Oceanis ICW

Compare with similar boats and find the perfect one for you.

This Boat
Similar Boats
 
The Image of Beneteau Oceanis ICW 2012 - 57972902012 Beneteau Oceanis ICW
Price Drop
The Image of 1987 Tayana 52 sailboat on dry dock, surrounded by maintenance equipment under a cloudy sky. - 01987 Tayana 52
Price$149,900$149,999$150,000$149,000$151,000$145,000
LocationCharlotte HarborLongboat KeyIndiantownSaint AugustineIslamoradaSaint Petersburg
Nominal Length45'42'52'38'38'40'
Beam15'-----
Draft6'-----
Engine Make-YANMARPerkinsTwin YanmarYanmarYanmar
Total Engine Power-74 hp67 hp30 hp44 hp40 hp
Days on Market370201378029573
Get in touch

At Last" is a 2012 Beneteau 45 Oceanis ICW yacht located in Port Charlotte, Florida. She's a very clean vessel, well equipped, arch with dinghy davits, diesel generator, refrigeratior, freezer, 3 zone air conditioner, bow thruster, full canvas package and more.


Major Price Reduction. Now only $149,900. Owner wants this to be the next 45 Oceanis sold!


With her shoal draft of 5'9" and ICW friendly bridge clearance, furling main, 105% jib and bowsprit with gennaker/drifter, she's a delight to sail. Her Yanmar diesel engine has about 500 hours, and she has Simrad electonics.


Take a look at the detailed specs and see why this 45' Beneteau could be your ticket for exceptional coastal cruising or long term passagemaker.


Call now for your private showing in Port Charlotte, Florida.



Accommodations



The Beneteau 45 Oceanis ICW is a two stateroom version ideal for cruising with two couples. She has a spacious salon with galley to port, and a clever work room/storage area aft of the galley. To starboard is a deluxe head with separate walk in shower and entry from the salon or from the aft stateroom.


Aft to starboard is a double berth with excellent storage and ventilation.


Forward of the salon is the owners's stateroom at the bow with storage and ventilation. To starboard is the en suite head with separate walk in shower.


Beautiful fabric and wood with bright overhead liner and lighting make this interior a delight to spend time in.


3 zone air conditioning with reverse cycle heat make for a comfortable environment in all weather conditions.


Galley


Galley is equipped with stainless steel sink.


Hot/cold domestic pressure water system


Vitrigo Refrigeration and separate freezer 85 Cu Ft.


LPG 3 burner Stove/Oven with broiler


LPG fiberglass tank in vented locker with solenoid control


Kenmore Microwave oven


Heads


Both Forward and Aft heads have electric Vacuflush toilets with holding tank


Separate walkin shower


Storage and ventilation abound


Vanity sink with H/C Pressure water system


Mechanical


Yanmar 4JH2 Diesel engine with less than 510 hours


MD 50 Sail Drive


Cummins Onan 7 Kw Diesel Generator Model MDKBJ


3 CruiseAir/Dometic Air Conditioner units with reverse cycle heat; 16K BTU Salon, 8K BTW Forward, 8K BTU Aft


3 blade Flexofold folding propeller


Electric winch


Electrical

120 V AC System with panel and breakers


12 V DC system


Battery charger


Lead Acid Batteries; (2) bow Thruster, (1) Engine Starting, (1) Generator Starting, House Bank


Electronics


B&G Triton II Electronic Suite


Simrad Halo 20 Radar


Chartlotter B&G Zeus3 12" Multifunction display NEW 2025


B&G Wind meter


B&G Knot meter


B&G Depth Sounder


Simrad VHF radio with wireless remote RAM Mic


Wireless Windvane


Forward looking sonar


Sails


In Mast Furling Mainsail in very good condition


105% Jib in very good condition on Facnor Roller Furler


Gennaker/Drifter (needs new continuous line furler)


Stainless steel bowsprit


Aluminum anodized Mast by ZSpar/US Spar


Boom Vang


Lines lead aft to cockpit


(3) 2 speed electric winches for main and genoa



Deck


Twin Helm steering pedestals


Full bimini, dodger and connector


Arch with integrated dinghy davits


Center table in cockpit with folding table panels and center storage


Multifunction Display for Radar and Chartplotter aft end of table


(3) Electric Winches


Bow Thruster control


Quick Electric Windlass control at helm at bow


Ground Tackle


Electric Windlass with helm and bow control Up/Down


Delta 20 KG/44 lb anchor


3/8" chain and nylon rode


Additional Information

The current owner is a boat builder, and worked for many years for Beneteau's Canadian dealership as head of commissioning. Prior to "At Last" being acquired by him, there was a report of a grounding. There was minor damage at the grid area. The owners statement regarding this contact with the bottom is noted here;


"Hi Alan,

As per our conversation i am following up on your request for additional information on the repairs to my boat.

As you know I am a retired maintenance and repair aircraft mechanic and have been working for a Beneteau dealer since 2005.

I spent my whole career repairing and maintaining aircrafts ,fiberglass propellers, and boats, i am as well a boat builder.

I built 3 boats, the latest one being a 45' offshore catamaran that i still own.

As most aircraft technician I am driven by procedures and manufacturer's recommendations.

I consider myself a meticulous and serious trades person.

I work with west system epoxy resins and products and follow their boat construction and repair technical instructions.

The repairs done to my Beneteau exceed the industry standards in the materials and techniques applied.

As a Beneteau rep i have witnessed many such repairs being undertaken in our shop by our technicians.

The grid pan installed by Beneteau when they build the boats is bonded to the inside of the hull and adds rigidity to the hull.

When such built boats run aground the hull flexes and the grid pan absorbs the stresses.

Grid pans often show cracks following such an event.

I believe whoever made the decision to not repair the boat was either misinformed or could not find knowledgeable technicians to carry out the repairs.

Such repairs are not overly expensive in material especially considering the value of such a vessel, and if no hull delamination is present can be done without extensive manpower.

The average value for such a repair as per the yard owner/ manager at the dealership ranges between 10 to 40 thousand dollars

When i saw the boat for the first time i inspected it checked it for delamination and water ingress and decided to buy it and repair the grid pan.

The grid pan had 8 cracks in it

The cracks were opposite each other consequent with a longitudinal collision.

They ranged from 2-3 inches to 10-12 inches and were on the inboard side and top skins of the grid pan only.

The cracks were ground out to a 4:1 ratio relative to the thickness of the damaged skin and repaired using multiple layers of biaxial tape to restore the initial material thickness using west system 5:1 epoxy resin.

The repairs were then faired and the whole area sealed with a barrier coat and gelcoat applied to the whole surface.

In addition to the crack repairs the grid pan was taped to the hull in a few locations.

I have attached a few pictures of the damaged areas before, during and after the repairs.

My wife and I bought this boat to take to France and live on it seasonally. Then our plans changed and we decided to sell it.

All the work done on this boat was done for our benefit and to the best of my knowledge following Gougeon brothers West system guidelines.

Hope this helps

Michael"



Surveyor Steven Berlin was commissioned in spring of 2026 to undertake a survey of the vessel. This full survey is available upon request along with accompanying photos. The text of the survey regarding this area where the repair was undertaken is as follows;


"Based on a full interior and a full exterior inspection the structural integrity of the vessel appears sound. Where accessible for inspection, stringers, engine beds, bulkheads and partitions, were all found secured and all appeared to be in good condition showing no evidence of stress, cracks or flexing and there was no evidence of any rot detected. The center "Grid" from the Mast Foot to the forward end of the engine compartment was previously repaired. When inspected at this time the repair work was found to be holding up and showed no evidence of any damages, stress or cracks and the repair work appears to have been completed with a heavier lay up schedule than the original build. The accessible Keel Bolts all appeared to be secured and in good condition. The hull sides were found in good overall condition with no evidence of any weaknesses detected. The bottom was sounded with a phenolic style hammer and was found in good condition with no evidence of any major weaknesses. There were no signs of blisters and no evidence of any delamination noted on the bottom surface. There was one small area on the starboard bow bottom just forward of the Bow Thruster tube where an apparent air void was detected in the bottom. No repair work is warranted at this time however the noted area should be checked at times of future haul outs to assure the area has not spread. The keel was found in good condition and showed no evidence of any hard groundings and showed no evidence of any separation from the hull bottom. The accessible Keel Bolts were found in good condition and showed no evidence of corrosion or damages.

The bottom paint was found in acceptable condition. Sacrificial zincs were found in acceptable condition.

The deck areas, main deck and the cockpit deck were found in good condition with no evidence of any weaknesses noted. The teak planked cockpit decking was found maintained and in acceptable condition. There was no evidence of any deck leaks noted and where accessible for inspection the deck/hull joint was found secured and in good condition. Deck drain hoses and related fittings were found in acceptable condition.

The cabin structure was found in good condition with no evidence of any weaknesses noted.

There was no evidence of any leaks noted from any of the cabin windows, the overhead hatches or from the cabin door area."


Exclusions


Owners personal possessions and tools do not convey in this sale.


Disclaimer:

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


Nominal Length
45ft
Length Overall
45.75ft
Length at Waterline
44.25ft
Beam
14.75ft
Max Bridge Clearance
64ft
Max Draft
5.75ft
Displacement
23257lb
Dry Weight
23257lb
Fresh Water Tanks
151gal
Fuel Tanks
53gal
Hull Material
fiberglass
Ac
✓
Summary
"At Last" is a 2012 Beneteau 45 Oceanis ICW yacht located in Port Charlotte, Florida. She's a very clean vessel, well equipped with fresh bottom paint, Aluminum arch, diesel generator, refrigeratior, freezer, 3 zone air conditioner, bow thruster, full canvas package and more. With her sho

Price History

DateEventPrice
6/5/26Price decreased$149,900(-11.8%)
5/26/26Price decreased$169,900(-15.0%)
5/8/26Price decreased$199,900(-13.0%)
1/31/26Price decreased$229,900(-4.2%)

Videos from Windswept Yacht Sales on this 2012 Beneteau Oceanis ICW

Contact Windswept Yacht Sales

PO Box 17141, Sarasota, FL, 34276

Overview from around the web 2012 Beneteau Oceanis ICW

Customers praise the 2012 Beneteau Oceanis ICW for its excellent combination of comfort, performance, and versatility

Many highlight its spacious and well-designed interior, which offers ample natural light and clever storage solutions, making extended cruising enjoyable. Sailors appreciate the boat’s responsive handling and solid build quality, noting that it performs well both in coastal waters and on longer passages. The innovative design tailored for Intracoastal Waterway navigation is also frequently mentioned, with users valuing its shallow draft and ease of maneuvering in tight spots. Overall, owners commend the 2012 Oceanis ICW for delivering a reliable and comfortable sailing experience.

The Biggest Pros and Cons

The 2012 Beneteau Oceanis ICW offers a blend of comfort, performance, and style, making it a popular choice for cruising enthusiasts. Here are some key pros and cons to consider:

Pros

Spacious Interior: The Oceanis ICW features a well-designed cabin layout with ample headroom and natural light, providing comfortable living space for extended trips.

Smooth Sailing Performance: Equipped with a balanced hull and efficient sail plan, it offers stable and responsive handling suitable for both coastal cruising and longer passages.

Modern Design: The 2012 model benefits from contemporary styling and quality craftsmanship, including fine wood finishes and ergonomic fittings.

Versatile Cockpit: The cockpit is designed for ease of handling, with clear lines and good protection, making it ideal for both relaxed cruising and more active sailing.

Good Storage: Plenty of storage compartments below and above deck help keep the boat organized and clutter-free.

Cons

Draft Limitations: With a moderate draft, it may not access very shallow waters or certain inland waterways as easily as some other cruisers designed specifically for shallow drafts.

Engine Power: The standard engine may feel underpowered for some, particularly when maneuvering in strong currents or tight marinas.

Maintenance Considerations: As with many boats of its size and age, ongoing maintenance and occasional upgrades can be necessary to keep systems running smoothly.

Price Point: Depending on condition and equipment, the 2012 Oceanis ICW might be priced higher compared to similar models, reflecting its build quality and features.

Made For

The 2012 Beneteau Oceanis ICW is designed for sailing enthusiasts who seek a versatile and comfortable cruiser tailored for Intracoastal Waterway (ICW) navigation. Ideal for coastal sailors and weekend adventurers, this model offers easy handling, shallow draft capabilities, and spacious accommodations, making it perfect for those looking to explore protected waterways, bays, and coastal cruising areas with confidence and style. Its blend of performance and comfort suits both experienced sailors and those new to coastal cruising.

Finance your dream boat!

Use our boat payment calculator to estimate monthly payments for 2012 Beneteau Oceanis ICW. Enter your down payment, choose a loan term, and adjust the interest rate to see an instant payment estimate — ideal if you're calculating boat payments before you enquire. Wondering how much does a Sail Cruiser cost in today's market, or how much does a Beneteau cost for similar models? This boat financing calculator helps you compare scenarios in seconds, whether you're considering used boat financing or a new purchase.
$
$
510152025
%
Principal Loan Amount$127,415
Total Payment$227,813.29
Monthly payment
$949.22/mo

Finance your dream boat!

Use our boat payment calculator to estimate monthly payments for 2012 Beneteau Oceanis ICW. Enter your down payment, choose a loan term, and adjust the interest rate to see an instant payment estimate — ideal if you're calculating boat payments before you enquire. Wondering how much does a Sail Cruiser cost in today's market, or how much does a Beneteau cost for similar models? This boat financing calculator helps you compare scenarios in seconds, whether you're considering used boat financing or a new purchase.
$
$
510152025
%
Principal Loan Amount$127,415
Total Payment$227,813.29
Monthly payment
$949.22/mo

Be the first to know when similar boats hit the market

Get notified when new boats become available

Meet the Broker

Address

PO Box 17141
Sarasota, FL 34276
Other Information about Windswept Yacht Sales

Initially working in sales and marketing for high performance catamaran manufacturer Horizon Yachts in Charleston, SC, and later, building motor yachts in mainland China for the US market, Alan brings not only solid knowledge of construction, systems and seaworthiness to his role at Windswept Yacht Sales, but strong analytical skills to help find the right boat for the right client, and for knowing how to market, price, promote and ultimately close the sale for an owner looking to move up, down or out of his or her current boat.

Want to update the details or images for this boat? Claim this listing by getting in touch.

Be the First to Know

Get notified when new boats become available.

Contact Windswept Yacht Sales about 2012 Beneteau Oceanis ICW

PO Box 17141, Sarasota, FL, 34276

Sign in

or
Login with Google

Check your inbox

We sent a magic link to your email address. Follow the magic link to finish signing in.