2026 Beneteau First 27 SESold

CONSTRUCTION

• Hull and deck constructed with Vacuum Infusion of Vinyl ester resin, foam and Soric GRP sandwich with unidirectional and biaxial laminates

• Hull is reinforced with Infused GRP stringers in the keel and bow sections

• Hull and deck are moulded in single tone off-white,

• Deck with high traction non-skid moulded

• Carbon fibre beams laminated on keel box and glued to the deck to support mast compression and keel hydraulic ram

• Two transoms hung balanced rudders, built of GRP foam sandwich,

• Red chainplates bolted to the main structural bulkhead

• Bolts, screws and fittings are all made of stainless marine grade stainless steel

• Faired underwater areas, ready for sanding, epoxy primer and antifouling application

KEEL ARRANGEMENT

• Swinging keel with “elephant leg” lead bulb, main steel structural element and epoxy GRP enclosure

• Laminated areas of the keel are pre-painted with epoxy primer for easier antifouling treatment

• Manually operated hydraulic pump with stainless steel hydraulic ram built in the Carbon fibre mast support

DECK EQUIPMENT

• 60 cm high stainless steel pulpit, pushpit and six stanchions painted in mat black, with double lifelines

• Stainless steel bow and stern mooring cleats

• Stainless steel chain plates for side shrouds and forestay painted in mat red

• Four Wichard folding pad eyes for lifting straps at mid-two stations,

• 2x Harken STA15 secondary halyard winches and 2x Harken STA20 jib and gennaker trim primary winches

• 2x Spinlock winchfeeder on the coachroof

• Two rope bags and two winch handle bags, Outils Océans & First branded

• Wide mainsail traveller, installed over the tiller

• Carbon tiller with Spinlock EA1200DS tiller extension

• Laminated tempered glass windows on both sides of the hull

• An opening hatch of 58 cm x 58 cm / 23 x 23 inch for light

• ventilation and deck access to the mid-section compartment

• An opening hatch of 25,5 cm x 25,5 cm / 10 x 10 inch for front cabin ventilation

• Bow anchor locker with Dyneema J3 staysail attachment point on the deck

• Stern storage compartment cover

• Foldable outboard cockpit compartment with two top & one bottom cover and engine bracket for internal combustion outboard (not mounted)

• Manual bilge pump operated from the cockpit

MAST & RIGGING

• CompoTech mast and boom with two sets of swept-back spreaders build in high-quality carbon fibre

• Ronstan Series 19 aluminium track for mainsail cars (cars not included; they are part of the mainsail option)

• All carbon parts UV protected

• Mast transport & storage bag

• Continuous 1x19 standing rigging with

• Bottle screw adjusters

• Retractable carbon bowsprit controlled from the cockpit

• Dyneema pole-out control line

• Dyneema gennaker tackline

• 2:1 Dyneema mainsail halyard with Wichard MX8 halyard shackle

• Dyneema jib halyard

• 2:1 Dyneema staysail halyard

• Dyneema masthead gennaker halyard

• Dyneema fractional gennaker halyard

• 9x Spinlock clutches for halyards, mainsail reefs and bowsprit control lines

• Ronstan blocks and cleats for the mainsail, jibs and gennakers control lines

• One tapered mainsheet with ball bearing low friction blocks

• Three mainsail reef lines

• Control line for the mainsail traveller

• 8:1 outhaul purchase led inside the boom

• 8:1 cunningham purchase

• 16:1 vang purchase

• Three jib sheets

• Spliced Dyneema jib inhaulers with a fixed length,

• 2:1 jib downhaulers with control lines, cleats and blocks

• Two tapered gennaker sheets with blocks

• Mast transport & storage bag

ELECTRICITY

• Custom electric control panel with five switches and smart Philippi LCD battery control display

• Remotely controlled master switch on the control panel

• Standard 12V and USB plugs in the saloon

• 12V 70AH AGM battery

• Ambiental indirect LED lights around the ceiling

• One mid-section and two front cabin battery LED lights

• Masthead LED navigation and anchor light

• Sentinel tracker to connect, monitor and control boat systems remotely on your mobile phone with a 1-year subscription

• Pre-wiring for most of the available electrical options

INTERIOR

• Bulkheads and furniture lightly covered with mat paint with white gel coat on the moulded parts for light, clean and low maintenance finish

Front Cabin

• Double V-berth with insubmersibility volume underneath

• Opening hatch of 25,5 cm x 25,5 cm / 10 x 10 inch for front cabin ventilation

Mid-section compartment / Wet room

• An opening hatch of 58 cm x 58 cm / 23 x 23 inch for light

• ventilation and deck access to the mid-section compartment

• The base for chemical or flush toilette with monolithic reinforcements for valves on the starboard side

Saloon

• Bright and spacious saloon area with large Plexiglass companionway washboard and sliding hatch

• Dedicated storage place for washboard back of the companionway steps

• Benches on both sides of the saloon, divided into four wooden covers of the storage space underneath

• Main electric box and battery in aft port compartment and keel hydraulic pump under aft starboard compartment

• Padded back-supports with gimbal cooker holder attachment points on both sides and storage behind the nets

• Wide berths in the stern on both sides, with insubmersiblity chambers underneath

• Front and aft keel box covers with table attachment point with a screw on the aft

• Electric boxes under the ceiling and under the companionway

• Extra storage room under the companionway and engine box for fresh-water tank or other systems, with cover

• Two ergonomically shaped wooden companionway steps

• Well insulated 40L icebox below bottom companionway step, with fridge compressor upgrade possibility

• Light grey EVA foam floorboards

• Shrouds attachments counter plates painted in mat red

Build To Order