2005 Sabre 38 Express Boat in West River, MD 20778 US

• Awlgrip painted Decks, Anti-Skid, and Cabin Top
• Awlgrip painted hull (Dark Blue) in 2015
• Bottom painted in March, 2026

Elegant, traditional designs, luxurious accommodations and excellent performance are the hallmarks of the Sabre 38 Express. Quiet and economical to operate, the Sabre 38 will impress the most experienced yachtsman. The helm deck is a careful study in ergonomics. Surrounded by large opening windows and overhead hatches for maximum ventilation and light. Views for the helmsman and crew are virtually unobstructed. The Stidd helm and mate's chairs, covered in Ultraleather upholstery, provide a degree of comfort rarely found in other boats. To add to cruising comfort, Sabre's engineers have reduced noise and vibration levels substantially with a careful study of engine room ventilation and insulation. Wide side decks with large diameter stainless steel hand rails, standard rope chain windlass and highly polished aluminum hatches all add to the beauty and functionality of her deck. A large anchor roller makes anchoring work a breeze. An optional hard back enclosure closes off the helm deck from the cockpit with the addition of two elegant curved windows in the corners, a sliding window to port and an aluminum entry door.Below decks her hand-crafted cherry interior adds to the sense of luxury, evident throughout. The stateroom berth is low and wide, making it both comfortable and easy to access. A pocket door separates the salon and stateroom while the head with stall shower has private access from the stateroom and from the salon. The main salon is configured with a long L-shaped settee and, her maple-inlaid salon table drops to form a guest berth. A standard thin screen TV and DVD player are recessed in to the furniture of the main cabin bulkhead. Her well equipped galley offers an electric cook top, convection microwave oven and coffee maker as well as ample storage for extended voyages.The Sabre 38 Hard Top Express is a yacht destined to become a classic for years to come.

• New starting batteries
• New house batteries
• Custom anchor bail
• Reprogrammed AIS to match boat
• New underwater lights installed
• Redo swim platform with screws
• Propspeed on propellors and bow thruster
• Oil change and impeller change on main engines and generator in 2025
• Custom toerail covers
• New refrigerator in the cockpit
• Smart TV in the salon
• New water filter in galley
• New faucet filters on the galley and head sinks
• Raw water intake hoses installed on both engines
• Cleaned both freshwater tanks
• New water tank level sensors installed
• Bottom painted in March, 2026
• Ceramic coat on hull 2025/2026
• Airlock air freshener installed in salon
• Replaced switch buttons in cockpit
• New circuit breaker buttons in cockpit
• New gas struts added to most hatches
• Quick release pins installed on the ladder in the engine room

• Dual Simrad MFDs at the helm
• Simrad wired remote control
• Simrad Autopilot
• Icom IC-M602 Marine VHF Transceiver
• AIS Transceiver
• Fusion stereo with remote at helm
• ACR Searchlight

• HULL COLOR Flag Blue  
• BOOT TOP COLOR Sabre White  
• COVE STRIPE Gold  
• DECK COLOR Sabre Sport Yacht White   
• ANTI SKID COLOR Beige  
• COCKPIT COAMINGS (TEAK OR FRP) Teak  
• SWIM PLATFORM COLOR Sabre Sport Yacht White with Contrasting Anti-Skid
• ENGINES Yanmar 6LY2A-STP engines @440 HP in lieu of Yanmar 370hp 6LY
• Teleflex Morse Magic Bus throttle and shift controls w/synchronizer
• GALLEY CORIAN
• HEAD CORIAN 
• WET BAR CORIAN
• SALON UPHOLSTERY Ultraleather
• BRIDGE SETTEE CUSHIONS Ultraleather
• AFT COCKPIT SEAT CUSHIONS Sunbrella
• HELM DECK TRIM TEAK OR CHERRY Cherry  
• FRP molded electronics mast for hardtop
• Eisenglass enclosure for aft end of Hard Top
• Straight settee on the aft port side helm deck with folding table
• Laid teak on cockpit coamings
• Teak deck on helm deck area 
• Anti-skid color (fore & side deck, coach roof, aft cockpit, hard top)
• Accord Shades on all opening ports
• Corian counter in galley
• Reverso Oil Change system
• Side Power bow thruster Model SP-75T
• Helm deck air conditioning 2 x 12,000 BTU
• Groco engine intake valves
• Hot and cold transom shower
• Fresh water wash down forward
• Shore water inlet

• Length (without anchor pulpit or swim platform) 38’6” 11.85m
• Beam (overall) 13’8” 4.20m
• Draft 3’4” 1.01m
• Deadrise (at transom) 16 degrees
• Displacement (approx., Dry ) 21,500 lbs. 9773kg
• Fuel capacity 350 gal. 1591L
• Water capacity 100 gal. 455L
• Holding tank capacity 40 gal. 150L
• Headroom (maximum) 6’6” 1.98m
• Sleeping accommodations 4 - 6’6” 4/1.98m
• Height over waterline w/mast 13’5” 4.09m
• Built to CE Category B, NMMA, ABYC and USCG standards

• Twin Yanmar 6LY2A-STP 440hp. 6 cylinder, fresh water-cooled engines.  Total hours are 1,360 hours (at time of listing).  1,000 hour service has been completed.  
• Yanmar electronic controls
• ZF 220-A Transmission
• 1 3/4" Aquamet 22 stainless steel shaft
• PSS drip-less shaft seals
• Manganese bronze struts with cutlass bearing
• Four blade NiBrAl propellers to ISO Class S
• 80 Amp, 12V alternators each engine.
• Seawater cooled 5" side exhaust system.
• Groco raw water intake strainers
• Engine room blower.
• Engine room vent ducts.
• Engine room floor with gray anti-skid rubber.
• White gelcoated engine room
• Foil face foam noise barrier.
• Onan 9.0Kw EQD generator (816 hours at time of listing).

• Single 350 gal aluminum diesel fuel tank.
• Racor fuel filters.
• 2” “Diesel” deck fill plate
• Fuel Level Indicator at helm.

• Teleflex hydraulic steering system (BA135-7ATM cylinder)
• Tilting Teleflex helm pump
• Twin bronze rudders w/adjustable tie-rod. (1 3/8” dia rudder post.)
• Twin Bennett stainless steel trim tabs.

• Yanmar single lever electronic controls
• Engine Start/Stop control panel
• Custom gauge panel to include for each engine:
  tachometer w/hour meter
  engine temperature
  engine oil pressure
  transmission oil pressure
  voltmeter
• Water in fuel warning light.
• Hi water temp and low oil pressure alarm
• Triple windshield wipers with washers.
• Ritchie Compass
• Fuel gauge
• Switch controls for horn, running lights, anchor light, engine room blower and optional equipment.
• Control for red instrument lights w/dimmer

• Two 30 A. AC shore power inlets and two 50 ft. cords
• Galvanic isolator w/monitoring system
• Illuminated main circuit breaker distribution panel.
• 120V outlets in each cabin and one in engine room.
• All galley and head receptacles are GFI protected.
• Additional outlets positioned in locations appropriate for entertainment systems in main cabin and fwd cabin
• One outlet located on the upper helm deck.
• Professional Mariner 50amp, 3-bank battery charger
• Cabin reverse cycle heat/ air conditioning in (2) zones.

• Two Group 27 dedicated engine starting batteries.
• Two 4D deep cycle ship's service batteries.
• Battery Management panel including:
  Emergency crossover switch.
  Ships power switch
  Starting Battery switch
  Illuminated main circuit breaker distribution panel w/battery condition gauge
• Lighting:
  Danish Cabin reading lights
  Cantalupi halogen lights in the overhead
  Halogen bar lighting in appropriate locations
  Improved engine room lighting
  Cockpit courtesy lights w/remote switch at transom door
• Tinned wire throughout.

• There are a total of four HVAC units and four zones aboard.  They are located in the master stateroom, galley, pilot house port, and pilot house starboard areas.  They can be run either from shore power or from the generator.

• Modified “V” Planing hull design with Shallow prop pockets.
• 23 degree deadrise amidships and 16 degrees at transom.
• ISO NPG Sport Yacht white gelcoat w/ vinylester back-up resin.
• Knitted Biaxial Structural E-Glass Reinforcements
• Vacuum Bagged Divinycell foam core in hull bottom and topsides.
• Foam/plywood cored fiberglass stringer system.
• Swim platform with under mounted telescoping ladder.
• Hull side rubbing strakes.
• PVC rub rail with stainless steel cap.
• Painted (IMRON) Double Boot Stripe.
• Gold Cove Stripe.

• ISO NPG gelcoat
• Knitted Biaxial Structural E-Glass Reinforcements with balsa coring.
• Molded in anti-skid deck surfaces.
• Windows with clear anodized frames recessed into hard top
• Inside walls sheathed w/high pressure laminate
• Hardtop w/ anti-skid surface on top
• In-swinging Transom Door with latch system
• Fiberglass bow pulpit with single anchor roller and windlass
• Anchor locker w/Southco slam latch #M1-64-8
• (1) Large Aft hinged double sided lazzarette locker hatch with gas struts and Southco (2) 3”dia compression latches
• (1) Large double-sided Engine Room hatch with 3” compression latches, and heavy SS hinges
• Hinged helm pod
• Center opening windshield

• 1 1/4" Diameter type 316 stainless steel perimeter rail system
• (6) 12” Stainless Steel Cleats (2 fwd, 2 mid ship, 2 in aft cockpit)
• (1) 10” Stainless Steel Cleat to starboard of windlass as anchor rode tie off.
• Windlass Lewmar rope/chain
• Single anchor roller sizes for 35# CQR or Delta
• Flagpole holder and flag staff. Burgee staff on pulpit
• Lewmar Low Profile polished aluminum hatches w/screens (2) #44 on foredeck, (2) #10 port and starboard.
• Custom stainless steel opening ports.
• Teak toe rails port and starboard with custom stainless steel cast mid rail chocks and forward skene chocks
• Teak cabin side eye-brow
• Custom cast stainless steel "Sabre" medallion
• Cast stainless steel corner hawse pipes in cockpit coamings
• Anchor wash down pump & connection (Freshwater)

• Stidd helm and mate’s seat
• Standard wood in helm area is cherry
• Sliding companionway hatch (smoked)
• Bi-fold teak companionway door
• Clear chart locker cover
• Wet bar with Corian countertop
• U-Line Ice Maker/ Refrigerator model COMBO-29FF, surface mounted.
• Forward facing bench with footrest.  Dry storage below.
• High-Gloss Pedestal mounted table

• Spacious Island Berth layout with 5" cushion. ¾” laminated trim.
• Ash hull ceilings.
• 2 Drawers under bed. A/C return grills under drawers
• 2 drawers in bureau w/locker w/shelf above and single louvered door.
• Upper enclosed shelves with storage behind. Locker face to have 2 louvered doors.  Each door to access partitioned space with shelves in the aft two compartments.  Doors hinged at bottom.
• Large Hanging Locker to port, cedar lined with cedar shelf and hangar pole. Open shelf above. Louvered door.
• Teak and holly sole with 2 coats of sealer.
• Soft headliner panels.
• Large pocket door between salon and forward cabin.

• Stainless sink
• Circular shower stall with seat and locker outboard.
• Hot and cold pressure water.
• Electric shower sump pump.
• Storage lockers.
• Corian counter with bull nose.
• Towel bar.
• Wood trimmed mirror over sink.
• Ventilation blower.

• "L" settee converts to double berth, 4 1/2" foam cushions.
• Storage under settee
• (2) enclosed lockers outboard with open shelf and removable fiddle forward.
• Master AC/DC breaker panel facing fwd on aft bulkhead behind pair of louvered doors.
• Fwd starboard bulkhead forms entertainment center space for standard 20” flat LCD TV and DVD Player as well as chase for optional air conditioning duct and discharge grill.
• Salon table on (2) hi- low pedestals which lowers to form berth filler.
• Bottle storage locker
• Teak and holly sole w(2) coats of sealer.
• Sound deadening headliner panels.

• Corian countertop
• High pressure laminate galley counter.
• Stainless steel sink with faucet.
• Built-in waste basket
• Drawers and storage lockers below counter.
• Storage cabinets outboard and above aft counter.
• Two burner electric cook top with separate convection microwave.
• 4.2 Refrigerator/Freezer 12DC/120VAC

• Water capacity 100 gals. in Two 50 gal. tanks.
• 11 gal. Stainless steel hot water heater off 110V and engine
• Hot and cold water pressure system 12V.

• Varnished cherry interior finish
• Screens on all opening ports and hatches
• Ocean Air screen/blinds on deck hatches
• Laminated wood trims on counters and shelves
• Dovetailed maple drawer boxes

• Polyethylene holding tank with 30 gallon capacity
• Jabsco Quiet Flush fresh water MSD
• Macerator pump on holding tank

• Fire extinguishers, (3) at 2 1/2 lbs.
• Marelon sea valves on all below waterline fittings.
• Bonding system to safeguard against galvanic corrosion.
• Automatic fire extinguishing discharge system with override.
• Automatic 12V electric bilge pump.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.