2005 Beneteau Oceanis Clipper 373Sold

• 2016 New windless
• 2018 Through hull fittings replaced.
• 2018 New Gennaker
• 2018 Replaced main sail
• 2018 B & G Chart plotter
• 2018 Added fuel injector priming pump.
• 2022 through hull inspected two replaced.
• 2022 Dripless shaft seal replaced.
• 2022 refrigerator freezer system modified. A separate compressor was added for the refrigerator
• 2022 New Fusion Bluetooth stereo system.
• 2022 New dodger, Bimini and connector
• 2022 new Victron, 3000 W inverter
• 2022 new (5) 100-amp hour Renergy lithium-ion batteries with Bluetooth connectivity.
• 2022 New macerator
• 2022 New main cabin skylight window replaced.
• 2022 New faucet in Galley
• 2022 Replaced line bags in the cockpit and on at the bow.
• 2023 The Keel seal was replaced, and the keel bolts were tightened.
• 2023 Bottom paint.
• 2023 Replaced engine compartment soundproofing

I : 44.72 ft

J : 13.91 ft

P : 41.01 ft

E : 14.44 ft

Working Sail Area : 721.94 sq ft

Pivoting helm seat allows easy access to bathing platform. (Bénéteau patent.) 2 side cockpit lockers fitted with wood shelves (for liferaft stowage).  2 aft cockpit lockers.  1 separate, watertight gas locker.  2 teak-slatted helm benches at each side of cockpit.  All cockpit benches are teak-slatted.  A steering wheel console takes navigation instruments.  Steering compass on console.  Control lever to starboard cockpit coaming.  12V cigarette lighter socket on console.  Handrail.  Cup holder. Folding varnished wood cockpit table fixed to steering console.  Manual bilge pump.

Headroom: 1.98m.  A functional space:  Laminated work surface with moulded wood fiddle.  Stainless steel double sink. ?Mixer tap with hot and cold pressurized water.  Gimbaled gas two-burner hob and oven with protective stainless steel safety rail.  110L top opening, foam insulated icebox, with plastic baskets.  Second front opening, foam insulated icebox (70L), fitted with refrigerating plate, baskets and shelves (only available with 2-cabin layout).  Seawater foot pump and icebox drainage.  110 V socket.  Ample stowage: - Stowage with hinged doors under hob. - Cutlery drawer. - 4 storage shelves with doors along the hull. - Stowage under sink. - Waste bin under sink. 4 opening port with curtains over head for good ventilation. 

Engine compartment with foam sound-proofing. Engine control panel with rev counter and alarms to starboard cockpit coaming. Stainless steel propeller shaft with GRP protection moulded into the hull.  Fixed three- blade propeller according to engine.  Engine mounting built into the inner mould.  Roto moulded 115L diesel tank aft, fitted with electronic gauge.  Saltwater and diesel filters with sediment reservoirs.

The hull is single-skinned GRP construction. Reinforced points (keel, rudder, chain plates, hull-deck joint) help to strengthen the structure. A structural inner moulding is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (shroud chainplate tie rods, keel, rudder, etc.), and spreads any loads guaranteeing reduced strain on the hull. The surface material of the inner moulding makes cleaning easier and provides a better finish. The standard hull colour is white with blue and gold decoration. Steel Blue is available as an option.

The deck is sandwich construction (glass fibre and balsa) for an optimal strength/weight ratio and excellent thermal and sound insulation. A diamond point non-slip surface increases safety over all areas of movement on deck. - MOORING AND ANCHORING -  Stainless steel bow fitting with offset roller to allow anchor stowage under way.  2 roller fairleads amidships.  2 roller fairleads and 2 x 300mm aluminium mooring cleats at the stern and 2 x 300mm aluminium mooring cleats at the bow. Main anchoring kit with 16 kg anchor, 20m chain and 38m warp. (4 mooring lines and 6 white fenders).  Vertical 800watt 12V electric windlass, with watertight relay casing, with on-deck up and down control switches for easy anchoring.  Self-draining anchor well with clinch fitting. - BATHING PLATFORM AND TRANSOM -  Transom with teak covered bathing platform.  Stainless steel bathing ladder with teak treads.  Outboard motor bracket.  Protective rubber rubbing strake to transom.  Cold water cockpit shower.

CE Certification: A8/B8/C12 

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.