2000 Pacific Seacraft 37 Boat in Annapolis, MD 21403 US

The Pacific Seacraft 37 is a superb high-performance cruising yacht that incorporates all the qualities an experienced sailor looks for in "a proper yacht," such as seaworthiness, premium quality, exceptional performance, comfort and beauty. She has a modern split keel and skeg rudder underbody. She's sleek, beautiful, and a brilliant performer in all conditions, as was proven by her remarkable and repeated performance in the recent Singlehanded Transpacific Yacht Race. She'll accommodate six and has features specifically designed for extended ocean voyages. The speed of the Pacific Seacraft 37 is already legendary, but performance in a cruising boat requires much more. A cruising boat must have a comfortable motion at sea and be well-balanced under sail so the crew does not have to fight the boat every yard of the way. The Crealock 37 was carefully designed for an easy motion. When you are shorthanded and you grow weary of those long night watches, a balanced boat can make a world of difference. In addition to her beauty, comfort, and sailing ability, the Pacific Seacraft 37 offers engineering and construction that is unsurpassed. Her fiberglass hull and deck are built to the most rigorous specifications, 100 per cent hand laid-up and squeegeed to remove all excess resin for optimum strength-to-weight ratio. Deck strength and insulation are increased with high-compressive-strength plywood core construction. Cored hull construction is available. Throughout the cabin, a soft white matte finish provides just the right counterpoint for the abundant hand-rubbed teak joinery. Sunlight and fresh air pour in from ten polished bronze opening ports and two large deck hatches.

ACCOMMODATIONS

Throughout: 

• Dometic L-2231 reverse-cycle AC/heat -w/ Passport remote (’23)
• Espar “forced-air” diesel heater (factory-ducted with three registers)
• Satin-varnished teak joinery
• Varnished teak and holly sole
• Teak-frame Alpenglow LED overhead lights; chrome LED reading lamps
• Hella fans
• Two Bomar overhead hatches -w/ custom screens (-w/ insulated Sunbrella covers deckside)
• Eleven (Pacific Seacraft signature) chrome-plated bronze opening portlights -w/screens

Forward cabin: Factory-option full-width V-berth -w/ custom/designer comforter and pillow-shams; Flat-screen TV - on articulating RAM mount; Weems and Plath chrome oil lamp; hanging locker, cabinets and drawers – and factory-custom shelf and locker;

Enclosed head: to starboard -w/shower -w/ folding slatted teak seat; vanity/sink fresh-water foot pump; Groco head -w/ varnished-oak toilet seat; Corian counter

Main cabin:

• Custom Italian leather upholstery
• L-shape dinette to starboard (converts to double-berth -w/insert), double dropleaf varnished-teak table
• Settee/berth to port
• Factory-custom cabinets and shelves - with lighting
• Custom/designer throw-pillows
• Flat-screen TV on port bulkhead - on articulating RAM mount #yes
• Sony Marine CDX-M10 stereo/CD player -w/ auxiliary input (controls at nav-desk; speakers in cabin and cockpit)
• Weems & Plath chrome clock and barometer; moon/tide clock; chrome oil lamp on custom gimbled mount
• U-shape galley, aft to starboard (details below)
• Sit-down, forward-facing nav-desk, aft to port (w/ factory-custom “raised-bureau” and custom teak "printer-shelf") and hanging/wet locker below
• Large quarterberth to port: large chromed-bronze opening port. There is a wet hanging locker below the nav station

U-SHAPE GALLEY

• “Factory-custom” Corian (magna-antarctic) counters
• Force-10 LPG gimballed stove -w/ oven and broiler #three burners
• Custom stove-cover/cutting-board
• Top-loading SeaFrost SA2 refrigeration/freezer (two plates) -w/ custom plexiglass shelving
• GE Microwave
• Deep double SS sinks -w/ hot & cold pressure water; Custom macerator for starboard drain
• Manual foot-pumps – for raw-water and freshwater - and fridge pumpout
• Filtered drinking water #Seagull IV, X-1B, new 5-year filter added end of season 2024
• Ample storage in varnished teak cabinets and drawers #PS custom cabinetts over sink
• Teak spice racks and paper towl holder, chrome coffee hooks, teak storage box under companionway ladder

SAILS and RIGGING

** Ullman Sails – Lightly Used/ Professionally Maintained **

• Lefiell mast and boom (with Mast Walker aluminum folding mast steps)
• Full-batten mainsail -w/ two reefs
• MackPack -w/lazyjacks; Harken Battcar system
• 120% high-clew furling genoa
• Harken furler for genoa
• Furling staysail
• Harken furler for staysail
• Running backstays – for heavy weather
• Pacific Seacraft single-handers package (lines lead to cockpit) #lines currently in storage
• Six Spinlock line-clutches
• Forespar rod-vang
• Telescoping whisker pole

IJPE : 618.00 sq ft; I: 44.00 ft; J: 15.75 ft; P: 38.08 ft; E: 14.25 ft

Six Lewmar STC, self-tailing (chrome) winches (with covers):

• Two #48.2 two-speed primary - on coaming (genoa/yankee sheets)
• #32.2 two-speed - on cabintop (mainsheet)
• Two #16 on on cabintop(halyard/reef/staysheet) on cabintop
• #16 on mast (halyard) -- plus two line-clutches

PROPULSION

• Yanmar 4JH-3E 54hp  ~720 hours
• MaxProp 3-blade feathering prop
• PSS shaftseal
• Oversize 150A alternator

ELECTRONICS

• Garmin GPSMAP 1040SX - at helm pedestal
• Garmin GPSMAP 800 - at nav-station
• Garmin GMR18 Radome - mounted on a Questus gimbled backstay mount
• B&G network instruments (Quad, Wind, GPS, Compass, SOG/COG #) – on custom SS mount above companionway
• B&G Pilot autopilot
• Amec Camino 101 AIS transponder (receive/transmit)
• Ship Module Multiplexer model Miniplex 2WI
• Standard Horizon GX2150 VHF transceiver -w/ AIS-receive #at nav station
• Standard Horizon VHF remote command mic - at helm 
• Icom M-710 marine SSB transceiver; Icom AT-130 automatic remote SSB tuner; Signature Pacific Seacraft installed RF counterpoise (glassed into hull during molding)
• Secondary hookup provision for amateur radio (wired to same Icom tuner via one/two switch for power and tune)
• Airmar 200WX environmental sensor (NEMA 2000/0183 compatible) 

ELECTRICAL

12V System

• Two Dynamic DC-200 amp-hour deep-cycle 4-D “house” batteries (’23)
• Group-31 deep-cycle engine-start battery ('25 pending)
• Two Kyocera 360 watt solar panels (mounted above bimini on custom stainless steel frame)
• Blue Sky MPPT 3024IL solar regulator -w/ remote monitor
• Magnum 2012U 2000W inverter/charger (100 amp/ 12V)

   110V System

• 30A shorepower -w/ 50’ cords
• Breaker/distribution panel
• Interior outlets

MECHANICAL and PLUMBING

• Dometic L-2231 reverse-cycle AC/heat -w/ Passport remote (’23)
• Espar “forced-air” diesel heater (factory ducted with three registers)
• Macerator for galley (’25)
• Factory-option 30 gallon auxillary fuel tank
• Electric pump for freshwater system (‘25)
• Seagull filtered drinking-water filter (5-year filter replaced (’24)
• Holding tank -w/ Y-valve
• Groco model-K marine head
• Manual bilge pump
• Two auto-electric bilge pumps
• Custom fiberglass water and holding tank covers (replaced prior polyethylene)
• SeaFrost SA2, engine driven compressor with two cooling plates -w/110V assist (1/4 hp motor) 

DECK and OTHER EQUIPMENT

• Factory hard dodger -w/ Strataglass windshield and side-panels - incorporated in cockpit enclosure (U-zips with screen and Strataglass)
• Custom Sunbrella bimini -w/ cockpit enclosure with “U-openings” of screen and Strataglass.
• Pacific Seacraft signature 30" lifelines/stanchions (secured to bulwarks) --w/gates. (“uncoated” 1x19 lifelines)
• Offset SS folding swim-ladder -w/ teak treads
• Custom teak screen cockpit doors with removable plexiglass windows #screens
• Custom insulated covered for portlight and hatches
• Two Kato custom stainless steel port and starboard stern masts -w/connector/bar for future antennae wind-generator etc
• USCG gear
• Docklines and fenders

 Custom-gloss-varnished teak brightwork (with Sunbrella custom covers): toerails, handrails, mast pulpit rails, teak coaming-caps, companionway hatch, dorade boxes 

Key factory-option/features

• Extensive custom cabinetry - belowdecks
• Hard dodger #Wavestopper
• SS/teak bow platform -w/bobstay
• Mast pulpits
• Teak dorade boxes/ chrome cowls
• Two portlights upgraded to large
• Offset swim ladder

COCKPIT

• Whitlock pedestal/wheel -w/Navpod mount for chartplotter
• Custom varnished-teak fold-down table
• Binocular holder on pedestal
• Ritchie binnacle stainless compass
• Teak capped coaming
• Hot/cold cockpit shower
• Custom cockpit seat-cushions
• Weems and Plath chrome oil lamp 

GROUND TACKLE

• Lighthouse 1501 WGGP windlass -w/ reversing circuit
• Dual rollers – on bow platform
• CQR 45# anchor -w/ 200' 5/16 galvanized chain
• Bruce anchor -w/ 50' galvanized chain and 200' 5/8" nylon three-strand rode
• Provision for stern anchor (roller, hause-pipe, chain-locker)
• Raw-water anchor washdown

HULL  ** Crealock signature “double-ender” **

• AlexSeal green two-part polyurethane (part of Pacific Seacraft factory 2012)
• Skeg-hung rudder
• Teak rubstrake -w/ SS guard
• Custom textalene-type mesh “drop-curtain” – for off-season storage (for UV protection) 

Trinka Sailing Dinghy ("available/negotiable")

=============================================================

Construction - Hand laminated biaxial fiberglass hull & deck. First hull laminate uses vinylester resin for superior blister resistance. Standard molded-in gel coat color is Oyster White with Blue boot & sheer stripes. - Stainless steel chainplates & backing plates are caulked & thru-bolted to the hull. Solid teak rubstrake on hull. - Rudder with steel web frame supported by high strength manganese bronze gudgeon & closely coupled to steel-reinforced integral skeg. - Ballast is 6,200 pound (2.82 mt) solid lead casting with s.s. keel bolts. Keel to hull joint embedded in epoxy. - Interior is structural fiberglass, plywood & gel coat interior module bonded into hull with fiberglass mat & woven roving. Primary bulkheads bonded into hull & deck w-fiberglass then bolted in place. - Deck, lockers & bilge gel coated to prevent mildew & to facilitate cleaning. - Deck to hull connection: mating hull & deck flanges bedded in polyurethane adhesive & fastened with stainless steel thru-bolts. - Deck balsa cored. Plywood core in hardware mount areas. - Deck has molded-in nonskid pattern. - Ten year limited hull warranty. Deck Equipment - All cleats, winches, turning blocks, pulpits & stanchions have backing plates. Backing plates & hardware caulked with polyurethane. - 30" high, stainless steel double rail bow & stern pulpits with running lights and 30" high, double lifeline stanchions. - Stainless steel stem fitting with two anchor rollers & locking pins. - Divided bow chain locker for two anchor rodes. One deck pipe to port. - Deep bulwarks with heavy teak cap rail, hand fitted with butterfly joints. - Chrome plated bronze deck hardware includes: Two Harken #46.2 STC two speed self-tailing genoa sheet winches. One Harken #16 STC one speed, self- tailing mainsheet winch. Two Harken #16 STC one speed, self-tailing jib & main halyard winches. Four 7" x 12" & six 4" x 7" opening ports. CE approved. Two 12" & two 10" bow mooring cleats with 4" hawse pipes. Two 10" open spring cleats amidships. Two 10" stern mooring cleats with 9" chocks. One anchor deck pipe on foredeck, & one aft. - Designated cleats for each winch. Four teak loop handrails on cabin house. - Two 19" Bomar double opening hatches with screens. CE approved. - Two Vetus dorade box cowl ventilators. - Fiberglass seahood, teak companionway sliding hatch & drop boards. - Harken ball bearing mainsheet traveler over companionway hatch. - Harken deck organizers & Spinlock rope clutches. - Inboard & outboard genoa tracks with Harken lead cars. - Stainless steel boarding gates, port & starboard with double lifelines. - Stern chain locker to starboard w-deck pipe & anchor roller fairlead. - Stern mounted s.s. swim ladder with teak treads, boarding gate & overboard retrieval line. 

Interior - Varnished teak woodwork. White Formica cabin house sides. - Louvered locker doors & solid drop doors with hidden hinges. - Louvered cabin door (top half only) & panel head door with piano hinges. - Chrome bronze push button locks on all locker door & drawers - 6' 4" headroom with teak & holly sole throughout cabin area, all hatches & hatch openings in sole banded in solid teak. - Wrapped 4" foam cushions with choice of fabrics. - Zippered vinyl headliner for access to deck hardware & wiring. Forecabin - 6' 6" long & 50" wide double offset berth forward to starboard. - Dressing seat, vanity & mirror. Two cedar lined louvered hanging lockers. - Drawers, bookshelf, cabinets & storage bins. Fiberglass planking. - Enclosed head with teak shower seat, grate, & storage lockers. Main Salon - 6' 4" long "L" shaped dinette to starboard converts to 50" wide dbl. berth. - Starboard side has teak ceiling planks, teak lockers & bookshelf with removable fiddle above dinette, storage bins below. - Teak double drop leaf table w-center storage & removable fiddles. - Teak loop handrail in port side overhead. - 6' 4" long and 24" wide settee berth to port with storage below. - Port side has teak ceiling planks, magazine rack & storage bins above settee, storage bins below. - Teak navigators desk with storage under lift top. - 7' long & 42" wide quarter berth to port. Fiberglass planking. 

Galley - Gimbaled stainless steel two burner propane stove w-oven & broiler. - Stainless steel safety bar. - Large 8 cu. ft. ice box with poured foam insulation, hinged lid & hand operated ice box pump out to sink. - Polished stainless steel double sink with electric pump pressure fresh water & foot operated manual pump. Macerator in drain system. - Built-in waste basket with laminated chopping block lid. - Food & dish storage lockers & drawers. 

Plumbing - Two water tanks with inspection ports, approx. 85 gal. (322 Itr.) total. - Hot & cold pressure fresh water system for galley, head & shower. - Easy access fresh water manifold. Color coded water hoses. - Manual water foot-pumps in head & galley. Accumulator tank. - Six gallon hot water heater from engine heat exchanger or shore power. - Bronze thru-hull fittings with UL approved bronze seacocks below the waterline & bronze ball valves above waterline. - All thru-hull hose connections are double hose clamped. - Marine head with 16 gal. holding tank & manual overboard pumpout. - Electric shower sump pump with overboard discharge. - 11 GPM electric automatic bilge pump with Ultra float switch. - 25 GPM manual bilge pump in cockpit operable by helmsman. 

Engine - YANMAR 4JH2E, four cylinder, 51 hp diesel with fresh water cooling, 3" exhaust & 80 amp alternator. Yanmar "C" control panel. - Clear covered engine control panel in cockpit with tachometer, engine hour meter & engine condition indicators. - Removable 40 gallon (151 Itr.) alum. fuel tank w-gauge & cleaning port. - Mechanical fuel pump, electric back-up fuel pump. - Racor MA 500 fuel filter with water separator. Dome light in engine room. - Seawater strainer bulkhead mounted & water lift muffler system. - Two blade solid bronze propeller. 

Electrical - AC-DC master power control panel with AC ammeter, AC voltmeter, polarity test circuit, 8 AC circuit breakers, DC ammeter, DC voltmeter & 20 DC circuit breakers. Panel is hinged for easy access & clear plastic screen. - Tinned copper wiring throughout. 110 volt shore power system. - Three Lifeline advanced absorbent glass mat sealed deep cycle Marine batteries (105 amp-hrs. each) below decks. - Four position battery switch. - One adjustable chart light at navigation station. - Cantalupi lights (eight dome & six reading). - Seven 110 volt AC duplex receptacles with GFI protection. - VHF coaxial antenna cable led from masthead to nav-table. - Shore power breaker. 

Cockpit - 8' 10" long seats with contoured seat backs & seat drains. - Coamings have two built-in winch handle boxes. - Three cockpit seat lockers for storage. Dome light in port locker. - Stern lazarette hatch & vented propane locker for two 20 lb. tanks. - One 5 gallon-20 pound propane tank (empty). Copper LPG hose. - Two safety harness pad eyes. - Whitlock pedestal wheel steering with brake & offset s.s. pedestal guard, single lever engine control & emergency tiller. - Removable cockpit sole w-neoprene gasket seal, finger pulls, & four bronze retainers for access to engine, steering & packing gland. - Deep gutters & two 1-1-2" cockpit drains for fast self-bailing. 

Spars and Rigging - Aluminum spars finished with two part linear polyurethane paint. - Six sheave masthead external halyards airfoil spreaders. - Combination bow - foredeck light on mast. Anchor light on masthead. - Internal conduit wth VHF coax cable & wires. - Two single line reefs, reef horns and gooseneck. - Internal 2:1 outhaul, adjustable boom topping lift. - 4:1 Harken block & tackle boom vang. All Harken blocks. - 9-32" 1x19 s.s. standing rigging. Color coded dacron running rigging. - Forged chrome bronze open body turnbuckles. 

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.