1985 Norseman 447 Boat in Olympia, WA 98502 US

The hull form is moderate with emphasis on sailing length and stability.The lead ballast is located in the very bottom of the wide fin keel increasing the stability and pointing ability of the Norseman. And a rudder that is set on a large skeg making the helm light and extremely well balanced under sail. 

Her raked bow carries two anchor rollers captured by a Nilsson electric windlass feeding chain and rode below deck. Iron cleats forward, mid and aft harness lines leading off deck through stainless fairleads divided by elevated woodcapped toerails. A tall twin spreader aluminum mast is keel stepped through and partnered to the cabin top. 

The decks are wide with interior chainplates and incorporates bulwarks for security while working on deck. Six hatches and 10 stainless steel opening ports surround the decks and cabin top with great visibility and ventilation. Contoured cockpit seats and large lazarette hatches provide work benches, tool storage, generator space and access to the engine and other components. A molded LGP locker accommodates two 5-gallon containers. 

The cockpit sole is finished with rubberized non skid. A dodger with SS framing and Bimini. Here the skipper will find access to two B&G navigational read outs and the depth and speed displays. The reverse raked transom and stainless steel pulpit secure the double lifelines and folding boarding ladder.

V berth with ensuite head, shower and storage

Dinette with folding table, and 3 convertible sea berths with lee cloths U-shaped galley

Nav station with fixed chair

Utility corridor

Aft master stateroom with ensuite head and stall shower

Teak Cockpit Table

Pressurized Water System w/accumulator tank

Fold Up Pilot Berth in Main Salon

Garmin touchscreen GPS 

Monitor Windvane 

Ground Plane Glasses in Hull 

Electric Bilge pump and 2 Manual pumps at Cockpit & Nav Station 

Ritchie Compass @ Helm, Small Compass @ Nav Station 

Multiple 12 volt outlets 

Tank Tender System 

12VDC/120VAC systems 

2 Siemens 55amp Solar Panels with Solar Boost 2000E/Big Sky Energy panel/processor 

Northern lights 5kW genset 

Trace 2500 watt inverter Trace/Heliotrope 75 charger 

Dual alternators 

Balmar DCM monitor 

EPIRB 

3 shore power cords w/ converters 

Robertson Linear Drive Autopilot

The interior is finished with an attractive balance of Burmese teak joinery. Varnished teak and holly flooring cover the entire cabin sole. Stepping below the navigation station is to starboard with every control and switch in one place. 

The aft cabin has a large double berth and a tall cedar lined closet. Moving forward to port is a U-shaped galley with a pantry and a fixed dinette. The port and starboard settee's can accommodated two more quests.

Forward to the 2nd cabin, finished handcrafted teak cabinets provide an abundance of storage. A large vee berth, a cedar-lined hanging locker on starboard side and a large owner's desk/vanity with a lavatory sink to port.

Force 10 3 burner stove w/ oven

Icebox

Double stainless sink

Sealand water heater

Hot/cold pressure water

Foot operated manual fresh water and seawater faucets 

VHF Explorer GX1800 w/ second station 

B&G Halo24 Radar

Vesper Marine XB-8000 AIS 

Maretron DST 110 triducer

Simrad AP24 autopilot with remote 

Airmar 200WX Ultrasonic weatherstation 

New Antal mast clutches 

Harken roller furling 

Spinnaker pole 

North Sails 110 Genoa 

North Sails 150 cruising Gennaker and spinnaker 

New ZoomSails (NZ) Main and staysail 2020 

New inner forestay and turnbuckle fabricated 2019 

Running rigging replaced in 2021 with Endura braid halyards and sheets; dynema running backs with new pelican hooks 

Lewmar winches:
 55, 46, 43 and 40 self tailing rebuilt (new pawls,springs and bearings) 2021 

Parachute anchor and storm sea drogue

New Revere Elite 6 man liferaft 2019

Nilsson windlass new V3000 motor 2021

Oversized Bruce 66# and danforth anchors

20 hp Honda outboard on Avon 310 RIB

Monitor self steering windvane in bag

Remounted stern mounts 2019 Stainless steel pulpits at bow and stern, stainless steel mast pulpits

Replaced generator exhaust hose
Replaced aft chain and rode
Removed house batteries
Removed refer compressor and icebox plates
Removed SSB radio and weatherfax
Added 10' Zodiac w/ 8hp Tohatsu
Added EPIRB

Fabricated new G10 mast step 2019, stepped with Spartite through cabin Replaced compression tubes and mast wiring runs 2019

Replaced storm trysail track 2019

Repainted mast, boom and spars 2019 

All bronze through-hulls throughout 2019 

Fabricated new spreader tips 2019 

Resurfaced and finished strut 2019 

Replaced engine exhaust elbow and fabricated new through-hull flange, replaced exhaust tubing run 2019 

New main engine raw water pump fabricated 2020 

Genset raw water pump replaced 2020 

Replaced portlights with custom New Found Metals Norseman stainless steel portlights and g10 sandwich plates 

New stainless lifelines 2020

New barrier coat 2020, new bottom paint 2022 (Trinidad 75 antifouling) 

New Raptor Deck decking (with templates for easy replacement) 2023

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.