2023 Nitro Z19 Sold Boat in Pittsburg, MO 65724 US
Built in 2023
Z19
1 Engine (Mercury)
19 feet
Other
Fiberglass/Reinforced
Other Nitro Z19 boats for sale in Missouri, United States
Other Nitro boats for sale in Missouri, United States
2023 Nitro Z19
- JUST IN ONLY 25 HOURS LIKE NEW $45,900
- 2023 Nitro Z19
- 2023 Mercury 200 hp Pro XS V8 4-stroke motor
- 2023 Tandem Axle Trailer
This boat includes a ton of options and features, some of which are listed below:
- Garmin Force Pro trolling motor
- Garmin 106SV UHD2 @ the bow
- Humminbird Helix 9 MDI fish finder @ the bow
- Humminbird Helix 10 MSI fish finder @ the console
- Humminbird Fish Finders are Linked
- NOCO Genius 3 bank on board battery charger
- Battery Switch
- 3 battery system
- Factory Travel Cover
- Hydraulic Steering w/Tilt
- Hot Foot
- Bike Seat w/ Power Pedestal
- Blinker Style Pro Trim
- Fold Down Rear Entry Step
- Manual Jackplate
- Spare Tire w/ Mount
- Mercury SS Prop
- Bow Trailer Steps
- Retractable Trailer Straps
- Transom Saver
- & more to list.
Save some money compared to new. Only 25 hours on the motor. Motor is serviced and ready to go. We went ahead and checked the boat out as well and everything works as it should. All the boat needs is to be on the lake. As you can see in the pictures, this boat has not been abused and is in like new condition. Previous owner has always stored this boat inside.
Give Rob at Whites Marine Center a call with any questions or to discuss this boat in more detail. You can reach us at the office or after hours We do offer financing and delivery options if needed. Check out our website for a listing of our new and used inventory.
The NITRO Z19 is the perfect blend of performance, capability and tournament-ready features. A proven hull carries up to 200 horses to get you up to speed in a hurry while the massive casting deck has ample space for you and a buddy. Inside, the massive rod storage and center box storages carry a world of gear. Underneath, the standard trailer is custom-matched to the Z19 for years of smooth on-road performance and confident loading and unloading. For a rig that outclasses the competition and punches above its weight, the Z19 answers the call.
At the fishing hole, the Z19 offers everything from a step to the aft deck with storage, an angled bow panel, livewell lid culling bracket and much, much more!
Features may include:
COMFORT, CONVENIENCE & PEACE OF MIND
- NMMA® certified
- Flotation meets or exceeds NMMA® & U.S. Coast Guard requirements
- EPA-compliant fuel system
- Non-skid bow & stern mats
- 5 drink holders
LIVEWELL SYSTEM
- 2 aft 19-gal. (71.92 L) insulated, rotomolded GUARDIAN™ livewells w/digital timers & rounded corners
- 500 GPH (1,892.71 LPH) aerator/fill pump
- 750 GPH (2,839.06 LPH) livewell recirculation/pump-out system
- Dual remote drain controls
- Starboard livewell lid w/culling bracket
TROLLING MOTOR
- Minn Kota® Maxxum® 24V, 70-lb. (31.75 kg) thrust, 42" (1.07 m) shaft, foot-control trolling motor w/mount
- Trolling motor pedal recess
CONSOLE
- Modular, aerodynamic console design w/expanded leg clearance & large fishfinder surface
- Removable acrylic, tinted windscreen
- Lowrance® HOOK Reveal 5C flush-mounted fishfinder
- NEW 5" (12.7 cm) digital touchscreen
- Veethree® multifunction instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
INTERIOR
- 34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility
- Bike seat w/pedestal
- Folding fishing seat w/composite frame
- Z-CORE™ seating system w/Force Flex suspension & contoured, rotomolded frame for driver & passenger seats
- Low driver & passenger flat seat mounting
PERFORMANCE
- NITRO VORTEX TECHNOLOGY™ (NVT™) hull for a smoother, drier ride
- RAPID PLANING SYSTEM™ (RPS™) for quicker holeshots & maximized speed
- 10" (25.4 cm) R&R Design Slidemaster adjustable jack plate-Black
- Rigging tube for organized wiring & abrasion resistance
- Stainless steel propeller
CONSTRUCTION & EXTERIOR
- 100% composite deck core w/superior thermal stability & strength-to-weight ratio
- Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
- Gelcoated stringer/liner system
- Foam-filled hull for optimal buoyancy & safety
- Full-width fiberglass-encapsulated composite transom
ELECTRICAL
- Angled bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount 10" (25.4 cm) fishfinder
- LED console courtesy light
- Manual LED-lighted bow gear storage
- Automotive-style labeled fuse panel w/cover
- Interstate® cranking battery
TRAILER
- Custom-fit, single-axle NITRO® trailer powdercoated w/GALVASHIELD® Impact corro
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 10/15/25 | Initial price | $45,900 |
2023 Nitro Z19 Video Tours
Nitro Z19: BoatTEST Review
Overview
The Nitro Z19 Z-Pro package is a 19-foot bass boat designed specifically for serious tournament anglers. Positioned to fill a gap in Nitro's lineup for a tournament-focused model in the 19-foot range, the Z19 Z-Pro offers a balance of size and performance. Measuring 19 feet 4 inches, it features ample casting platforms and a 16-degree deadrise at the transom, providing enough stability and handling capability to navigate choppy waters while remaining compact enough to fish in tight spaces near docks and structures.
Power and Performance
Our test boat was powered by a Mercury Optimax 200 Pro XS outboard engine with a 1.75-to-1 gear ratio, turning a Fury 14x25 three-blade stainless steel propeller. With two people aboard, a full fuel tank, and test gear, the boat weighed approximately 3,015 pounds. It achieved a top speed of 68.4 mph at 5,600 rpm. The most efficient cruising speed was recorded at 3,500 rpm, where the boat ran at 39.1 mph while consuming 7.4 gallons per hour, resulting in a fuel economy of 5.3 miles per gallon and a range of 239 statute miles with 10% fuel reserve. The Z19 Z-Pro utilizes Nitro's Vortex Technology (NVT) hull design, characterized by parabolic scalloped shapes that curve upward, enhancing turning ability and lift. Additionally, the Rapid Planning System incorporates a transom setback and a notch ahead of the motor to deliver cleaner water to the prop, improving propulsion efficiency. The hull design also minimizes water surging into the cockpit during deceleration, keeping the aft casting deck dry. Handling was confident and stable, with no chine walking or prop ventilation observed during wide arcs and tight turns.
Exterior Design and Deck Features
The Z19 Z-Pro's exterior is thoughtfully designed for tournament fishing. The aft casting deck measures 44 inches fore to aft and 80 inches across, providing 24 square feet of casting space. A dedicated socket allows for secure placement of a portable seat. The boat includes an 8-foot Power-Pole shallow water anchor mounted at the stern, and the Mercury Optimax 200 Pro XS is installed on an 8-inch jack plate. Forward on the aft deck, there are two insulated roto-molded 19-gallon Guardian Livewells with digital timers, oxygen generators, remote drain controls, and high-capacity recirculating and aerator pumps. The livewells are baffled and colored blue to reduce bait stress. Storage is ample, with locking hatches on each side containing removable tubs sized for seven Plano 3700 Series tackle boxes. A large center hatch provides access to the power pole pump, trolling batteries, cranking battery, and a three-bank 30-amp battery charger. Additional features include a two-stroke oil tank, a 1,000-gallon-per-hour bilge pump, and gel-coated stringers for durability.
Bow and Forward Deck
The bow casting deck offers 34 square feet of space with anti-fatigue padding beneath the marine carpet for comfort during extended fishing sessions. The bow is equipped with a Minn Kota Fortrex trolling motor delivering 80 pounds of thrust on a 45-inch shaft. Controls for the trolling motor, a second Lowrance HDS-7 structure scan fish finder, light and trim switches, a recessed foot pedal, and a cup holder are all conveniently located. Storage includes a port locker for rods up to eight feet long, a large lighted center compartment with customizable partitions, and a starboard locker with racks for the stern light, seat pedestals, and a paddle. Bungee cords on each side of the bow deck provide quick and secure rod storage.
Helm and Seating
The helm is equipped with multifunction V3 gauges and a Lowrance HDS-7 fish finder flush-mounted both at the bow and helm stations. The driver benefits from a hot foot throttle, tilt hydraulic steering wheel, and a pro-trim turn signal style trim switch that allows hands-on-wheel operation. Push-button accessory switches flank the wheel, with livewell recirculation controls on the starboard side. The shift control is ergonomically positioned, with livewell fill switches just ahead. A storage tray with a rubber mat and power pole controls are located near the shifter. Seating features automotive-style seats with wraparound backrests and angled cushions designed to hold occupants securely at high speeds. An optional second console can be bolted outboard to port, providing additional rod storage with a carpeted ramp for rod tips.
Additional Features and Trailer
Additional conveniences include a roto-molded 62-quart cooler with improved insulation and a tray to keep sandwiches separate from ice, a trash receptacle, and multiple cup and tool holders. The boat comes standard with a tandem axle trailer featuring GalvaShield coating and Surge disc brakes, enhancing durability and safety during transport.
Conclusion
The Nitro Z19 Z-Pro package is a well-rounded tournament bass boat that combines thoughtful design, advanced hull technology, and comprehensive features to meet the demands of serious anglers. Its performance on the water is confident and efficient, with excellent handling and fuel economy. The ample storage, livewell system, and ergonomic controls contribute to a tournament-ready experience right out of the box.
Overview from around the web 2023 Nitro Z19
Customers are praising the 2023 Nitro Z19 for its exceptional performance and versatility on the water
Many highlight its spacious and comfortable design, making it ideal for both fishing trips and family outings. The boat’s smooth handling and reliable power delivery receive consistent positive feedback, ensuring a confident and enjoyable ride. Users also appreciate the high-quality build and thoughtful features that enhance convenience and functionality. Overall, the Nitro Z19 2023 is celebrated for combining durability, style, and performance in a way that meets the needs of avid anglers and recreational boaters alike.
The Biggest Pros and Cons
The 2023 Nitro Z19 offers a range of advantages and a few considerations to keep in mind:
Pros
Spacious Design: The Z19 provides ample deck space, making it ideal for both fishing and family outings.
Powerful Performance: Equipped with a strong outboard motor, it delivers excellent speed and handling on the water.
Advanced Features: Includes modern electronics and fishing amenities such as multiple rod holders, live wells, and a high-quality fish finder.
Durability: Built with high-quality materials ensuring long-lasting performance and resistance to tough water conditions.
Comfort: Features comfortable seating and ergonomic layout for an enjoyable boating experience.
Cons
Price Point: The advanced features and build quality come with a higher price tag compared to some entry-level fishing boats.
Size: While spacious, its larger size may make it less convenient for storage or towing with smaller vehicles.
Fuel Consumption: Powerful performance can lead to higher fuel consumption, which is a consideration for longer trips.
Made For
The 2023 Nitro Z19 is designed for anglers who demand a versatile and high-performance bass boat. Ideal for both serious tournament fishermen and weekend anglers, it offers a perfect blend of speed, stability, and advanced fishing features. Whether you’re casting in freshwater lakes or navigating rivers, the Nitro Z19 provides the reliability and cutting-edge technology to elevate your fishing experience. Its spacious layout and robust construction make it suitable for those who value comfort, durability, and top-tier performance on the water.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Want to update the details or images for this boat? Claim this listing by getting in touch.
Boat Location
Contact White's Marine Center about 2023 Nitro Z19
Jct 64 and 64b, Pittsburg, MO, 65724
Login with Google