2018 Nitro Z19

$32,995

Used

Boat in Warsaw, MO 65355 US

builtBuilt in 2018
Year the boat was built
model

Z19

Boat model
engine

1 Engine (--)

Engine type and count
length

19.3 feet

Overall boat length
fuel

Gas

Fuel type
material

Fiberglass/Reinforced

Hull material
Nominal Length
19.33ft
Length Overall
19.33ft
Beam
7.83ft
Deadrise At Transom
16deg
Dry Weight
1850lb
Max Passengers
4
Max Capacity
1375
Seating Capacity
4
Fuel Tanks
50gal
Hull Material
fiberglass
Hull Shape
modified-vee
Engine 1
Engine Type
outboard
Fuel Type
gasoline
Additional Details
  • Length:19' 4"
  • Length: 19' 4"
  • Beam: 94"
  • Bottom width: 74"
  • Max. recommended HP: 200 HP
  • Fuel capacity: 50 gal.
  • Max. person capacity: 4 persons
  • Max. person weight: 500 lbs.
  • Max. person, motor & gear weight: 1375 lbs.
  • Interior depth: 18.5"
  • Transom height: 23"
  • Deadrise: 16 degrees
  • Draft: 15"
  • Average weight: 1850 lbs.
  • Average package weight: 3249 lbs.
  • Package height: 5' 7"
  • Package width: 8' 6"
  • Towing length: 25' 0"
  • Storage length: 22' 7"
Standard Features

Comfort, Convenience & Peace of Mind

  • NMMA® certified
  • Flotation meets or exceeds NMMA® & U.S. Coast Guard Requirements
  • EPA-compliant fuel system
  • Non-skid mats bow & stern
  • 6 drink holders
  • 4 stainless steel pull-up cleats
  • Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
  • 4 grab handles (1 at each seat)
  • Built-in tournament ruler & holder
  • Fire extinguisher
  • Horn
  • Paddle

 

Console

  • NEW capacitive touch keypad
  • Flush-mounted Lowrance® HOOK-5x fishfinder w/surface temperature & down imaging
  • Hydraulic steering w/tilt
  • Removable acrylic, tinted windscreen
  • Ready to accept optional removable port console
  • Custom-molded modular console w/2-tone gelcoat
  • Veethree® multi-function instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
  • Dash light dimmer
  • LED courtesy light
  • 12V outlet

 

Construction & Exterior

  • NEW 100% composite deck core w/superior thermal stability & strength-to-weight ratio
  • Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
  • Gelcoated stringer/liner system
  • Foam-filled hull for optimal buoyancy & safety
  • Full-width fiberglass-encapsulated composite transom
  • Low-profile gunnels to maximize deck size & for easier casting

 

Electrical

  • Bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount 12" (30.5 cm) graph
  • 1,000 GPH (3,785 LPH) bilge pump
  • LED console courtesy light
  • Bow navigation lights integrated into gunnels w/stowable stern light
  • Manual LED-lighted bow storage
  • Automotive-style labeled fuse panel w/cover
  • Interstate® 27M-XHD cranking battery
  • 2 heavy-duty Interstate® Series 29 trolling batteries
  • 2-bank, 8-amp battery charger w/exterior receptacle
  • 6-gauge trolling motor wiring w/50-amp circuit breaker
  • Master power switch
  • Waterproof Deutsch plugin gauge connectors
  • Water/abrasion-resistant connectors

 

Interior

  • NEW Z-Core seating system w/Force Flex suspension & contoured, rotomolded frame (driver & passenger seats)
  • 34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility w/lots of storage
  • Step-up to bow deck w/62-qt. (58.7 L) insulated cooler & removable trash receptacle
  • Bike seat w/pedestal
  • Folding fishing seat w/composite frame
  • Designated net storage behind seating
  • Trolling motor pedal recess for Minn Kota® & MotorGuide® trolling motors
  • Oversized, lockable port & starboard bow rod lockers w/lift assists for rods up to 8' (2.44 m)
  • Molded-in drainage channels around bow storage compartments
  • Port & starboard bow rod hold-down straps
  • Oversized lockable center bow storage locker
  • Partner rod ramp w/rod handle organizer & hold-down strap
  • 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
  • Molded utility rigging compartment w/lift-out tool/rope storage tray
  • Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
  • 16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
  • Lockable compression latches
  • Footrest w/non-skid mat under console(s)
  • Insulated aluminum lids w/welded corners

 

Livewell Systems

  • 2 insulated aft 19-gal. (72 L) Guardian™ livewells w/digital timers
  • 750 GPH (2,840 LPH) livewell recirculation/pump-out system
  • 500 GPH (1,893 LPH) aerator/fill pump
  • Dual remote drain controls
  • Rotomolded w/rounded corners

 

Performance

  • NITRO® Vortex Technology™ (NVT™) hull for a smoother, drier ride
  • Rapid Planing System™ for quicker holeshots & maximized speed
  • 3" (7.6 cm) adjustable jack plate (Verado® only)
  • 8" (20.0 cm) adjustable jack plate (Optimax® only)
  • Rigging tube for organized wiring & abrasion resistance
  • Stainless steel propeller

 

Trailer

  • Custom-fit, single-axle NITRO® trailer w/powder-coat finish & GALVASHIELD® Impact corrosion & chip protection for improved durability
  • Surge disc brakes
  • Inside the frame brake line system w/1-point bleed
  • 15" (38.1 cm) chrome wheels w/radial tires
  • No Touch Vortex hub lubrication system w/6-yr. 100,000-mile limited warranty
  • Spare tire carrier (spare tire avail. at additional cost)
  • All-welded rectangular GALVASHIELD® frame
  • Space-saving swing-away tongue to reduce storage length
  • 1,200-lb. (544 kg) swing-up locking jack w/swivel wheel
  • Heavy-duty winch w/nylon strap & bow safety strap
  • Outboard motor support to reduce hull & transom stress while towing
  • Carpeted bunks & fender boards to protect hull
  • Submersible LED lights
  • Safety cables

 

Trolling Motor

  • Minn Kota® Maxxum® 24V, 70-lb. (31.8 kg) thrust, 42" (1.07 m) shaft foot-control trolling motor
About Us

PLEASE CALL WITH ANY OTHER QUESTIONS AND THANKS FOR LOOKING.

We do our best to go through your new/used boat from bow to stern checking and making sure that everything on the boat works as it should. The engine comes fully serviced and we water test every boat and engine we sell new or used . We want you to have a trouble-free experience when you take one of our boats to the lake?.

***Delivery options*** ****TRADES WELCOME**** ***No Paperwork or Dealer Fees***

 ***Our Dealership specializes in service after the sale***

 ***Out the door no haggle/hassle pricing*** ***We have financing available WAC***

 ****Don't be fooled into making a purchase at some High Dollar, High Volume, Big Box Store Mass Produced Cookie Cutter Dealership. WE ARE THE REAL DEAL FOR REAL PEOPLE...

 ************** Here at Truman Lake Marine we are a family owned and operated dealership in Warsaw Missouri since 2007. We take pride in making your new/used boat purchase a Haggle free trouble-free experience. We also offer the best service in our area with over 100 years of combined experience. Our trained professional staff is here to answer and take care of all your boating needs.

Services we offer but not limited to:

Engine maintenance oil changes, tune ups, water pump replacement, prop repair/replacement...

Rigging graphs/depth finders, trolling motors, Dakota lithium batteries sales/install & chargers?

Major engine repair electric diagnostics, engine condition and well-being bilge/live well repair?

Custom made boat covers, Bimini tops, frames and enclosures.

 We would greatly appreciate an opportunity to earn your business!.. Let us show you the right way to be helped!

Dealership 660-438-6358

We are located 5 miles North of Warsaw, Missouri on the west side of 65 Hwy

Truman Lake Marine And Powersports,llc

23963 Hwy 65

Warsaw, Mo 65355

660-438-6358

9-5 Mon.-Fri.

9-Noon Sat.

WE HAVE SEVERAL OTHER BOATS AND LOOSE ENGINES ON OUR WEBSITE

Price History

DateEventPrice
8/6/25Initial price$32,995

Contact Truman Lake Marine

23963 US-65, Warsaw, MO, 65355

Boattest.com Review

Overview

The Nitro Z19 Z-Pro package is a 19-foot bass boat designed specifically for serious tournament anglers. Positioned to fill a gap in Nitro's lineup for a tournament-focused model in the 19-foot range, the Z19 Z-Pro offers a balance of size and performance. Measuring 19 feet 4 inches, it features ample casting platforms and a 16-degree deadrise at the transom, providing enough stability and handling capability to navigate choppy waters while remaining compact enough to fish in tight spaces near docks and structures.

Power and Performance

Our test boat was powered by a Mercury Optimax 200 Pro XS outboard engine with a 1.75-to-1 gear ratio, turning a Fury 14x25 three-blade stainless steel propeller. With two people aboard, a full fuel tank, and test gear, the boat weighed approximately 3,015 pounds. It achieved a top speed of 68.4 mph at 5,600 rpm. The most efficient cruising speed was recorded at 3,500 rpm, where the boat ran at 39.1 mph while consuming 7.4 gallons per hour, resulting in a fuel economy of 5.3 miles per gallon and a range of 239 statute miles with 10% fuel reserve. The Z19 Z-Pro utilizes Nitro's Vortex Technology (NVT) hull design, characterized by parabolic scalloped shapes that curve upward, enhancing turning ability and lift. Additionally, the Rapid Planning System incorporates a transom setback and a notch ahead of the motor to deliver cleaner water to the prop, improving propulsion efficiency. The hull design also minimizes water surging into the cockpit during deceleration, keeping the aft casting deck dry. Handling was confident and stable, with no chine walking or prop ventilation observed during wide arcs and tight turns.

Exterior Design and Deck Features

The Z19 Z-Pro's exterior is thoughtfully designed for tournament fishing. The aft casting deck measures 44 inches fore to aft and 80 inches across, providing 24 square feet of casting space. A dedicated socket allows for secure placement of a portable seat. The boat includes an 8-foot Power-Pole shallow water anchor mounted at the stern, and the Mercury Optimax 200 Pro XS is installed on an 8-inch jack plate. Forward on the aft deck, there are two insulated roto-molded 19-gallon Guardian Livewells with digital timers, oxygen generators, remote drain controls, and high-capacity recirculating and aerator pumps. The livewells are baffled and colored blue to reduce bait stress. Storage is ample, with locking hatches on each side containing removable tubs sized for seven Plano 3700 Series tackle boxes. A large center hatch provides access to the power pole pump, trolling batteries, cranking battery, and a three-bank 30-amp battery charger. Additional features include a two-stroke oil tank, a 1,000-gallon-per-hour bilge pump, and gel-coated stringers for durability.

Bow and Forward Deck

The bow casting deck offers 34 square feet of space with anti-fatigue padding beneath the marine carpet for comfort during extended fishing sessions. The bow is equipped with a Minn Kota Fortrex trolling motor delivering 80 pounds of thrust on a 45-inch shaft. Controls for the trolling motor, a second Lowrance HDS-7 structure scan fish finder, light and trim switches, a recessed foot pedal, and a cup holder are all conveniently located. Storage includes a port locker for rods up to eight feet long, a large lighted center compartment with customizable partitions, and a starboard locker with racks for the stern light, seat pedestals, and a paddle. Bungee cords on each side of the bow deck provide quick and secure rod storage.

Helm and Seating

The helm is equipped with multifunction V3 gauges and a Lowrance HDS-7 fish finder flush-mounted both at the bow and helm stations. The driver benefits from a hot foot throttle, tilt hydraulic steering wheel, and a pro-trim turn signal style trim switch that allows hands-on-wheel operation. Push-button accessory switches flank the wheel, with livewell recirculation controls on the starboard side. The shift control is ergonomically positioned, with livewell fill switches just ahead. A storage tray with a rubber mat and power pole controls are located near the shifter. Seating features automotive-style seats with wraparound backrests and angled cushions designed to hold occupants securely at high speeds. An optional second console can be bolted outboard to port, providing additional rod storage with a carpeted ramp for rod tips.

Additional Features and Trailer

Additional conveniences include a roto-molded 62-quart cooler with improved insulation and a tray to keep sandwiches separate from ice, a trash receptacle, and multiple cup and tool holders. The boat comes standard with a tandem axle trailer featuring GalvaShield coating and Surge disc brakes, enhancing durability and safety during transport.

Conclusion

The Nitro Z19 Z-Pro package is a well-rounded tournament bass boat that combines thoughtful design, advanced hull technology, and comprehensive features to meet the demands of serious anglers. Its performance on the water is confident and efficient, with excellent handling and fuel economy. The ample storage, livewell system, and ergonomic controls contribute to a tournament-ready experience right out of the box.

Overview from around the web 2018 Nitro Z19

Customers praise the 2018 Nitro Z19 for its exceptional combination of performance and versatility

Many highlight its powerful Mercury Pro XS engine, which delivers impressive speed and responsiveness on the water. Anglers appreciate the spacious deck layout, providing ample room for casting and gear storage. The boat’s smooth handling and stability make it ideal for both freshwater and tournament fishing. Additionally, users often mention the quality craftsmanship and durable materials, ensuring long-lasting reliability. Overall, the 2018 Nitro Z19 is celebrated for enhancing fishing experiences with its thoughtful design and high-performance features.

The Biggest Pros and Cons

The 2018 Nitro Z19 offers a range of features that make it a popular choice for bass fishing enthusiasts. Here are some of the pros and cons to consider:

Pros

Spacious Deck Layout: The Z19 provides a large, open deck that offers plenty of room for casting and moving around, making it ideal for serious anglers.

High-Quality Construction: Built with durable materials and a sleek design, the boat is both sturdy and stylish.

Powerful Performance: Equipped with a reliable outboard motor, the Z19 delivers strong acceleration and efficient cruising speeds.

Advanced Storage Solutions: Multiple compartments and rod lockers help keep gear organized and easily accessible.

Comfortable Seating: Adjustable seats with good support enhance comfort during long fishing trips.

Integrated Electronics Options: The boat can be outfitted with modern fish-finding and navigation systems for improved fishing success.

Cons

Price Point: As a well-equipped fishing boat, the Z19 may come with a higher price tag compared to entry-level models.

Fuel Efficiency: Depending on the motor size and speed, fuel consumption can be moderate, which might be a consideration for longer outings.

Limited Passenger Capacity: While spacious for fishing, the boat is generally designed for a small group, which might not be ideal for larger parties.

Storage Limitations for Larger Gear: Despite ample storage for fishing equipment, there may be limited space for bulky recreational gear or coolers.

Made For

The 2018 Nitro Z19 is designed for anglers who seek a versatile, high-performance bass boat that combines speed, precision, and comfort. Ideal for both serious tournament fishermen and weekend anglers, this boat offers advanced features and spacious storage to accommodate all your fishing gear, while delivering a smooth, stable ride on various water conditions. Whether you're navigating lakes, rivers, or reservoirs, the Nitro Z19 provides the reliability and functionality needed to enhance your fishing experience.

Finance your dream boat!

Use our boat payment calculator to estimate monthly payments for 2018 Nitro Z19. Enter your down payment, choose a loan term, and adjust the interest rate to see an instant payment estimate — ideal if you're calculating boat payments before you enquire. Wondering how much does a Bass cost in today's market, or how much does a Nitro cost for similar models? This boat financing calculator helps you compare scenarios in seconds, whether you're considering used boat financing or a new purchase.
Monthly payment
$208.94/mo
$
$
%
Principal Loan Amount$ 28,046
Total Payment$50,145.21

Finance your dream boat!

Use our boat payment calculator to estimate monthly payments for 2018 Nitro Z19. Enter your down payment, choose a loan term, and adjust the interest rate to see an instant payment estimate — ideal if you're calculating boat payments before you enquire. Wondering how much does a Bass cost in today's market, or how much does a Nitro cost for similar models? This boat financing calculator helps you compare scenarios in seconds, whether you're considering used boat financing or a new purchase.
Monthly payment
$208.94/mo
$
$
%
Principal Loan Amount$ 28,046
Total Payment$50,145.21

Be the first to know when similar boats hit the market

Get notified when new boats become available

Boats For Sale in Missouri, United States Similar to the 2018 Nitro Z19

Compare with similar boats and find the perfect one for you.

The Image of 2018 Nitro Z19 boat with Mercury engine, parked outside Truman Lake Marine dealership. - 02018 Nitro Z19
Price Drop
The Image of Blue 2018 Nitro Z18 boat with Mercury engine, parked near a scenic river. - 12018 Nitro Z18
$32,995$34,599$34,705$36,005$36,995$26,299
WarsawSaint LouisSpringfieldIndependenceSaint CharlesBranson
19'17'17'17'17'19'
-MERCURY MARINEMERCURY MARINEMERCURY MARINEMERCURY MARINEMERCURY MARINE
-115 hp115 hp115 hp115 hp-
2873362871603011
Price
Location
Nominal Length
Engine Make
Total Engine Power
Days on Market

Other Nitro Z19 boats for sale in Missouri, United States

Meet the Broker

Address

23963 US-65
Warsaw, MO 65355

Boat Location

Be the First to Know

Get notified when new boats become available.