2023 Nitro Z19
$46,500
$46,900
Boat in Boiling Springs, SC 29316 US
Built in 2023
Z19
1 Engine (Mercury)
19.3 feet
Gas
Fiberglass/Reinforced
New Arrival!. Hardly used 2023 Nitro Z19 Dual Console with Mercury 200 V8! Options include:
Mercury 200hp V8 EFI 4-Stroke Outboard (Only 15 Original Hours!) // Remaining Engine Warranty Expires July, 2026 // Stainless Prop // Manual Jackplate // Seastar Hydraulic Steering // Boarding Ladder // 2-Pedestal Seats // Noco 3-Bank Charger // Battery Switch // Interstate Marine Batteries // large Livewell // HotFoot // Lowrance HDS-9 at Bow and Helm * With Active-Target* // Lowrance 24v Ghost Trolling Motor // Ample Rod and Tackle Storage // Seats-4 // Removable passenger Console // Built in Insulated Cooler // Full Boat Cover // Dual Axle Trailer with Spare and 4-Disc Brakes Included! Must See this one.
Call O'Connell Marine 833/922-1128
** Financing Available - oconnellremarketing . com /APPLY
The NITRO Z19 is the perfect blend of performance, capability and tournament-ready features. A proven hull carries up to 200 horses to get you up to speed in a hurry while the massive casting deck has ample space for you and a buddy. Inside, the massive rod storage and center box storages carry a world of gear. Underneath, the standard trailer is custom-matched to the Z19 for years of smooth on-road performance and confident loading and unloading. For a rig that outclasses the competition and punches above its weight, the Z19 answers the call.
At the fishing hole, the Z19 offers everything from a step to the aft deck with storage, an angled bow panel, livewell lid culling bracket and much, much more!
Length:19' 4"
Beam: 7' 10"
Bottom Width: 6' 2"
Max. Recommended HP: 200 HP
Fuel Capacity: 50 gal.
Max. Person Capacity: 4 persons
Max. Person Weight: 500 lbs.
Max. Person, Motor & Gear Weight: 1375 lbs.
Interior Depth: 18.5"
Transom Height: 23"
Deadrise: 16 degrees
Draft: 15"
Average Dry Weight: 1850 lbs.
Average Package Weight: 3500 lbs.
Package Height: 5' 7"
Package Width: 8' 6"
Towing Length: 25' 0"
Storage Length: 23' 11"
Storage Length (w/Outboard Trimmed Down): 23' 0"
Comfort, Convenience & Peace of Mind
NMMA® certified
Flotation meets or exceeds NMMA® & U.S. Coast Guard requirements
EPA-compliant fuel system
Non-skid bow & stern mats
5 drink holders
5 stainless steel pull-up cleats, including cleat at driver seat
4 grab handles (1 at each seat)
Fire extinguisher
Horn
Paddle
Livewell System
2 aft 19-gal. (71.92 L) insulated, rotomolded GUARDIAN™ livewells w/digital timers & rounded corners
500 GPH (1,892.71 LPH) aerator/fill pump
750 GPH (2,839.06 LPH) livewell recirculation/pump-out system
Dual remote drain controls
Starboard livewell lid w/culling bracket
Trolling Motor
Minn Kota® Maxxum® 24V, 70-lb. (31.75 kg) thrust, 42" (1.07 m) shaft, foot-control trolling motor w/mount
Trolling motor pedal recess
Console
Modular, aerodynamic console design w/expanded leg clearance & large fishfinder surface
Removable acrylic, tinted windscreen
Lowrance® HOOK Reveal 5C flush-mounted fishfinder
NEW 5" (12.7 cm) digital touchscreen
Veethree® multifunction instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
Dash light dimmer
Tilt hydraulic steering
Below-console RAM® X-Grip® phone holder & 12V outlet
LED courtesy light
Ready to accept optional removable port console
Interior
34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility
Bike seat w/pedestal
Folding fishing seat w/composite frame
Z-CORE™ seating system w/Force Flex suspension & contoured, rotomolded frame for driver & passenger seats
Low driver & passenger flat seat mounting
Bow tool/drink holder
Bow port & starboard rod hold-down straps
Molded-in drainage channels around bow storage compartments
Oversized, lockable bow port & starboard rod lockers w/lift assists for rods up to 8' (2.44 m)
Oversized lockable bow center storage locker
Step to bow deck w/62-qt. (58.67 L) insulated cooler, removable trash receptacle & snap-in sandwich tray
Partner rod ramp w/rod handle organizer & hold-down strap
Footrest w/non-skid mat under console(s)
Integrated step to aft deck w/lockable storage & removable tub
Designated net storage behind seating
Built-in tournament ruler & holder
2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
Lift-out tool/rope storage tray in rigging compartment
Insulated aluminum lids w/welded corners
16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
Lockable latches
Performance
NITRO VORTEX TECHNOLOGY™ (NVT™) hull for a smoother, drier ride
RAPID PLANING SYSTEM™ (RPS™) for quicker holeshots & maximized speed
10” (25.4 cm) R&R Design Slidemaster adjustable jack plate—Black
Rigging tube for organized wiring & abrasion resistance
Stainless steel propeller
Construction & Exterior
100% composite deck core w/superior thermal stability & strength-to-weight ratio
Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
Gelcoated stringer/liner system
Foam-filled hull for optimal buoyancy & safety
Full-width fiberglass-encapsulated composite transom
Low-profile gunnels to maximize deck size & for easier casting
NEW splashwell protective film
Stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
Electrical
Angled bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount 10" (25.4 cm) fishfinder
LED console courtesy light
Manual LED-lighted bow gear storage
Automotive-style labeled fuse panel w/cover
Interstate® cranking battery
2 heavy-duty Interstate® trolling batteries
NEW NOCO® GB40 jump starter pack
2-bank, 10-amp battery charger w/exterior receptacle
6-gauge trolling motor wiring w/50-amp circuit breaker
Master power switch
Waterproof Deutsch plugin gauge connectors
Water/abrasion-resistant connectors
Trailer
Custom-fit, single-axle NITRO® trailer powdercoated w/GALVASHIELD® Impact corrosion & chip protection for improved durability
7-pin connector
15" (38.1 cm) chrome wheels w/radial tires
Surge disc brakes
Hub system w/1-year limited warranty
All-welded rectangular GALVASHIELD® frame
Space-saving swing-away tongue to reduce storage length
Fold-away tongue jack
Heavy-duty winch w/nylon strap & bow safety strap
Outboard motor support to reduce hull & transom stress while towing
Carpeted bunks & fender boards to protect hull
Submersible LED lights
Retractable transom tie downs
Safety cables
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 5/18/26 | Price decreased | $46,500(-0.9%) |
| 5/2/26 | Price decreased | $46,900(-1.9%) |
| 4/18/26 | Initial price | $47,790 |
2023 Nitro Z19 Video Tours
Boattest.com Review
Overview
The Nitro Z19 Z-Pro package is a 19-foot bass boat designed specifically for serious tournament anglers. Positioned to fill a gap in Nitro's lineup for a tournament-focused model in the 19-foot range, the Z19 Z-Pro offers a balance of size and performance. Measuring 19 feet 4 inches, it features ample casting platforms and a 16-degree deadrise at the transom, providing enough stability and handling capability to navigate choppy waters while remaining compact enough to fish in tight spaces near docks and structures.
Power and Performance
Our test boat was powered by a Mercury Optimax 200 Pro XS outboard engine with a 1.75-to-1 gear ratio, turning a Fury 14x25 three-blade stainless steel propeller. With two people aboard, a full fuel tank, and test gear, the boat weighed approximately 3,015 pounds. It achieved a top speed of 68.4 mph at 5,600 rpm. The most efficient cruising speed was recorded at 3,500 rpm, where the boat ran at 39.1 mph while consuming 7.4 gallons per hour, resulting in a fuel economy of 5.3 miles per gallon and a range of 239 statute miles with 10% fuel reserve. The Z19 Z-Pro utilizes Nitro's Vortex Technology (NVT) hull design, characterized by parabolic scalloped shapes that curve upward, enhancing turning ability and lift. Additionally, the Rapid Planning System incorporates a transom setback and a notch ahead of the motor to deliver cleaner water to the prop, improving propulsion efficiency. The hull design also minimizes water surging into the cockpit during deceleration, keeping the aft casting deck dry. Handling was confident and stable, with no chine walking or prop ventilation observed during wide arcs and tight turns.
Exterior Design and Deck Features
The Z19 Z-Pro's exterior is thoughtfully designed for tournament fishing. The aft casting deck measures 44 inches fore to aft and 80 inches across, providing 24 square feet of casting space. A dedicated socket allows for secure placement of a portable seat. The boat includes an 8-foot Power-Pole shallow water anchor mounted at the stern, and the Mercury Optimax 200 Pro XS is installed on an 8-inch jack plate. Forward on the aft deck, there are two insulated roto-molded 19-gallon Guardian Livewells with digital timers, oxygen generators, remote drain controls, and high-capacity recirculating and aerator pumps. The livewells are baffled and colored blue to reduce bait stress. Storage is ample, with locking hatches on each side containing removable tubs sized for seven Plano 3700 Series tackle boxes. A large center hatch provides access to the power pole pump, trolling batteries, cranking battery, and a three-bank 30-amp battery charger. Additional features include a two-stroke oil tank, a 1,000-gallon-per-hour bilge pump, and gel-coated stringers for durability.
Bow and Forward Deck
The bow casting deck offers 34 square feet of space with anti-fatigue padding beneath the marine carpet for comfort during extended fishing sessions. The bow is equipped with a Minn Kota Fortrex trolling motor delivering 80 pounds of thrust on a 45-inch shaft. Controls for the trolling motor, a second Lowrance HDS-7 structure scan fish finder, light and trim switches, a recessed foot pedal, and a cup holder are all conveniently located. Storage includes a port locker for rods up to eight feet long, a large lighted center compartment with customizable partitions, and a starboard locker with racks for the stern light, seat pedestals, and a paddle. Bungee cords on each side of the bow deck provide quick and secure rod storage.
Helm and Seating
The helm is equipped with multifunction V3 gauges and a Lowrance HDS-7 fish finder flush-mounted both at the bow and helm stations. The driver benefits from a hot foot throttle, tilt hydraulic steering wheel, and a pro-trim turn signal style trim switch that allows hands-on-wheel operation. Push-button accessory switches flank the wheel, with livewell recirculation controls on the starboard side. The shift control is ergonomically positioned, with livewell fill switches just ahead. A storage tray with a rubber mat and power pole controls are located near the shifter. Seating features automotive-style seats with wraparound backrests and angled cushions designed to hold occupants securely at high speeds. An optional second console can be bolted outboard to port, providing additional rod storage with a carpeted ramp for rod tips.
Additional Features and Trailer
Additional conveniences include a roto-molded 62-quart cooler with improved insulation and a tray to keep sandwiches separate from ice, a trash receptacle, and multiple cup and tool holders. The boat comes standard with a tandem axle trailer featuring GalvaShield coating and Surge disc brakes, enhancing durability and safety during transport.
Conclusion
The Nitro Z19 Z-Pro package is a well-rounded tournament bass boat that combines thoughtful design, advanced hull technology, and comprehensive features to meet the demands of serious anglers. Its performance on the water is confident and efficient, with excellent handling and fuel economy. The ample storage, livewell system, and ergonomic controls contribute to a tournament-ready experience right out of the box.
Overview from around the web 2023 Nitro Z19
Customers are raving about the 2023 Nitro Z19 for its exceptional performance and sleek design
Many highlight its spacious deck layout, making it perfect for both fishing and family outings. Anglers appreciate the advanced fishing features, including multiple rod holders and ample storage for gear. The boat's smooth handling and powerful engine receive frequent praise, delivering a confident and enjoyable ride on the water. Overall, owners value the Nitro Z19's combination of comfort, functionality, and style, making it a top choice for serious fishermen and recreational boaters alike.
The Biggest Pros and Cons
The 2023 Nitro Z19 offers a compelling blend of performance, comfort, and advanced features, making it a popular choice among bass fishing enthusiasts. Here are some of the pros and cons of this model:
Pros
Spacious Layout: The Z19 provides ample deck space for fishing, with well-designed storage compartments to keep gear organized and accessible.
Powerful Engine Options: Equipped with reliable Mercury outboard engines, it delivers excellent speed and responsiveness on the water.
Advanced Electronics: Features include a high-quality fish finder and GPS system, enhancing navigation and fish tracking capabilities.
Comfort and Seating: Comfortable seating arrangements with adjustable pedestal seats offer great support during long fishing trips.
Durability and Build Quality: Constructed with high-quality materials, the boat ensures longevity and can handle various water conditions.
Smooth Ride: The hull design provides stability and smooth handling, even in choppy waters.
Cons
Price Point: The Nitro Z19 is positioned at a higher price range, which may be a consideration for budget-conscious buyers.
Weight: It can be relatively heavy, requiring a suitably powerful tow vehicle and trailer setup.
Limited Cabin Space: As a bass boat, it lacks enclosed cabin space, which might be less comfortable for extended trips in adverse weather.
Fuel Efficiency: With powerful engines, fuel consumption can be higher compared to smaller or less powerful boats.
Made For
The 2023 Nitro Z19 is designed for anglers who demand a versatile and high-performance bass boat. It’s perfect for both serious tournament anglers and weekend fishing enthusiasts who want a reliable, comfortable, and feature-packed boat. Whether you’re fishing in lakes, rivers, or reservoirs, the Z19 offers the speed, stability, and advanced technology needed to enhance your fishing experience. Its spacious layout and durable construction make it ideal for those who value both functionality and style on the water.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in South Carolina, United States Similar to the 2023 Nitro Z19
Compare with similar boats and find the perfect one for you.
 2023 Nitro Z19 | |||||
|---|---|---|---|---|---|
| $46,500 | $45,980 | $49,495 | $41,900 | $41,815 | $51,199 |
| Boiling Springs | Moncks Corner | Columbia | Little River | Columbia | Myrtle Beach |
| 19' | 19' | 20' | 19' | 19' | 19' |
| Mercury | MERCURY MARINE | MERCURY MARINE | Mercury | MERCURY MARINE | MERCURY MARINE |
| 200 hp | 175 hp | 250 hp | 200 hp | 150 hp | 200 hp |
| 33 | 494 | 22 | 42 | 553 | 567 |
Other Nitro Z19 boats for sale in South Carolina, United States
Other Nitro boats for sale in South Carolina, United States
Meet the Broker
Address
Boat Location
Contact O'Connell Remarketing about 2023 Nitro Z19
1360 Upper Valley Falls Road , Boiling Springs, SC, 29316
Login with Google