2019 Nitro Z18
$30,977
Boat in Grand Prairie, TX 75052 US
Built in 2019
Z18
1 Engine (--)
18.7 feet
Gas
Other
2019 Nitro Z18
America's best-selling fiberglass bass boat and the official boat of Major League Fishing®, The NITRO® Z18 is a champion from bow to stern. NEW for 2019, we've tweaked the design with an angled flush bow graph panel, more leg room under driver console and integrated net stow behind seats.
It is based on our revolutionary NVT™ hull with Rapid Planing System™, giving you a smooth, soft and dry ride along with a brisk holeshot and precise handling when turning and at the top end. The interior of the Z18 is laid out to provide the ultimate in fishability, with Z-Core seating system with Force Flex suspension for the most comfortable ride possible.
Features may include:
Comfort, Convenience & Peace Of Mind- NMMA® certified
- Flotation meets or exceeds NMMA® & U.S. Coast Guard requirements
- EPA-compliant fuel system
- Non-skid mats bow & stern
- 6 drink holders
- 4 stainless steel pull-up cleats
- Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
- 4 grab handles (1 at each seat)
- Fire extinguisher
- Horn
- Paddle
- Aft 30-gal. (114 L) Guardian™ aerated livewell w/divider & timer
- 500 GPH (1,893 LPH) livewell recirculation/pump-out system
- 500 GPH (1,893 LPH) aerator/fill pump
- Rotomolded w/rounded corners
- Minn Kota® Maxxum® 24V, 70-lb. (31.8 kg) thrust, 42" (1.07 m) shaft, foot-control trolling motor
- Extended leg room under console
- NEW Lowrance® HOOK2 5 Combo flush-mounted fishfinder
- Hydraulic steering w/tilt
- Removable acrylic, tinted windscreen
- Ready to accept optional removable port console
- Custom-molded modular console w/2-tone gelcoat
- Veethree® multifunction instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
- Dash light dimmer
- Water-resistant switch panels
- LED courtesy light
- 12V outlet
- 34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility w/lots of storage
- Bike seat w/pedestal
- Folding fishing seat w/composite frame
- Z-Core™ seating system w/Force Flex suspension & contoured, rotomolded frame for driver & passenger seats
- Trolling motor pedal recess for Minn Kota® & MotorGuide® trolling motors
- Port & starboard bow rod hold-down straps
- Molded-in drainage channels around bow storage compartments
- Oversized, lockable port & starboard bow rod lockers w/lift assists for rods up to 8' (2.44 m)
- Oversized lockable center bow storage locker
- Step to bow deck w/62-qt. (58.7 L) insulated cooler & removable trash receptacle
- Partner rod ramp w/rod handle organizer & hold-down strap
- Footrest w/non-skid mat under console(s)
- NEW designated net storage behind seating
- 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
- Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
- Insulated aluminum lids w/welded corners
- 16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
- Lockable compression latches
Price History
| Date | Event | Price |
|---|---|---|
| 4/19/26 | Price decreased | $30,977(-3.1%) |
| 2/21/26 | Initial price | $31,977 |
2019 Nitro Z18 Video Tours
Boattest.com Review
Overview
The Nitro Z18 bass boat is an 18-foot 8-inch vessel designed for serious bass anglers seeking high performance and speed. Powered by Mercury's new 150 horsepower 3.0-liter inline 4 Pro XS 4-stroke outboard engine, the Z18 aims to deliver improved torque, acceleration, and overall efficiency compared to its predecessor, the Mercury 2-stroke Optimax. This review provides a comprehensive evaluation of the boat's performance, design, and features.
Power and Performance
The Mercury 150 Pro XS engine powering the Nitro Z18 is based on a 3.0-liter inline 4-cylinder block introduced in 2012 but features significant enhancements. It boasts the highest displacement and lowest weight in its class at 456 pounds, along with the highest alternator output of 60 amps. Key improvements include transient spark calibration that increases torque by 5 to 7 percent for better acceleration, a revised gear ratio of 2.08:1 in the 4.8-inch gear case to boost torque, and four raw water pickups in the gear case nose cone allowing for higher engine mounting and greater trim flexibility. During testing with two people aboard and a full fuel tank, the Z18 reached a top speed of 60.2 miles per hour at wide open throttle using a 25-inch Fury 4-blade propeller. Cruising at 3,000 RPM yielded 25.7 miles per hour and 6.4 miles per gallon, providing a range of 231 statute miles with a 10% fuel reserve. The boat demonstrated quick acceleration, planing in 4.1 seconds, reaching 20 mph in 4.6 seconds, and 30 mph in 6.4 seconds. Handling was responsive with smooth sweeping turns at moderate speeds.
Exterior Design and Deck Layout
The Nitro Z18 features a beam of 7 feet 10 inches and provides ample deck space for fishing activities. Access to the boat is facilitated by a fold-up ladder located on the port side. The aft fishing deck measures 6 feet 7 inches by 2 feet 3 inches, offering generous casting room. Underneath the deck hatches are compartments housing the batteries, a 30-gallon divided live well, and dry storage with removable plastic tubs on either side. The forward fishing area spans 6 feet 7 inches wide at the aft section, tapering to 5 feet 2 inches forward, with a depth of 4 feet 2 inches at the forward aft area. This space includes a wastebasket and a 62-quart draining cooler that can be outfitted with an optional sandwich tray. Additional exterior features include four 4.5-inch pull-up cleats, cup holders, and tool racks mounted outboard on each side. The boat is equipped with a Minn Kota Maxim trolling motor delivering 70 pounds of thrust and controlled by a foot pedal, enhancing maneuverability in fishing scenarios. The Z18 is trailered on a single-axle unit with a swing-away tongue, carpeted bunks, and a motor support, making it a ready-to-use package.
Helm and Controls
The helm console is designed for ergonomic operation and comfort. It is topped with a windscreen and features an instrument panel centered around a 5-inch Lowrance Hook 5X fish finder. Flanking the fish finder are SmartKraft multifunction gauges, with the tachometer positioned to port and the speedometer to starboard. The steering wheel is mounted on a tilt hydraulic helm for adjustable driver comfort. The throttle and shift controls are conventional mechanical units, with a remote trim switch allowing the engine to be tilted up for trailering. The boat includes a master power switch adjacent to the ignition key that disables electrical power to accessories, preventing battery drain. Storage for fishing rods is conveniently located ahead of the companion seat on the port side, complemented by a rubber mat on the gunwale to protect reel finishes.
Additional Engine Features and Maintenance
The Mercury 150 Pro XS engine incorporates several practical design elements to enhance durability and ease of maintenance. The gear case includes low water pickups that facilitate higher engine installation and compatibility with jack plates, beneficial for navigating shallow waters. Engine mounts have been stiffened slightly to improve stability. The engine cowl features updated graphics and a streamlined profile. A maintenance decal is prominently displayed on the motor's side for quick reference. The alternator's 60-amp output is the highest among four-cylinder four-stroke engines, and the idle charge battery management system automatically increases idle speed to produce 20 amps when low battery voltage is detected, ensuring reliable battery maintenance.
Conclusion
The Nitro Z18 bass boat, equipped with Mercury's 150 Pro XS outboard, represents a well-rounded package for bass anglers who prioritize speed, torque, and functional fishing features. Its combination of advanced engine technology, efficient fuel consumption, responsive handling, and thoughtfully designed fishing spaces makes it a competitive choice in its class. The inclusion of standard equipment such as the Minn Kota trolling motor and a quality trailer further enhances its value as a turnkey fishing platform.
Overview from around the web 2019 Nitro Z18
Customers are praising the 2019 Nitro Z18 for its exceptional performance and versatility on the water
Many highlight its powerful Mercury engine options, which deliver impressive speed and smooth handling. Anglers appreciate the spacious deck layout, ample storage compartments, and advanced fish-finding technology that make fishing more efficient and enjoyable. The boat’s sturdy construction and sleek design also receive positive remarks, with users noting its stability in various water conditions. Overall, the 2019 Nitro Z18 is celebrated for combining comfort, functionality, and high performance, making it a top choice for serious anglers and boating enthusiasts alike.
The Biggest Pros and Cons
The 2019 Nitro Z18 offers a range of features that make it a popular choice for anglers seeking both performance and comfort. Here are some of the pros and cons of this model:
Pros
Spacious Deck Layout: The Z18 provides ample casting space, making it ideal for serious fishing.
Powerful Performance: Equipped with a reliable engine, it delivers strong acceleration and smooth handling on the water.
Quality Construction: Built with durable materials, the boat offers longevity and withstands various fishing conditions.
Advanced Electronics: Comes with integrated fish-finding and navigation systems to enhance your fishing experience.
Comfort Features: Includes comfortable seating and storage compartments to keep gear organized and accessible.
Cons
Price Point: The advanced features and quality build may come at a higher cost compared to some competitors.
Fuel Efficiency: Depending on the engine option, fuel consumption might be higher during extended use.
Size Limitations: While spacious for its class, the 18-foot length may feel limiting for larger groups or extended trips.
Customization Options: Some users may find the factory options limited and seek aftermarket modifications for specific needs.
Made For
The 2019 Nitro Z18 is designed for serious anglers who demand high performance, versatility, and advanced features in a bass fishing boat. It's ideal for both competitive tournament fishermen and weekend warriors who want a reliable, fast, and comfortable boat that can handle various fishing conditions. With its spacious layout, durable construction, and powerful engine options, the Nitro Z18 is perfect for those looking to elevate their fishing experience on lakes and rivers.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Texas, United States Similar to the 2019 Nitro Z18
Compare with similar boats and find the perfect one for you.
 2019 Nitro Z18 | |||||
|---|---|---|---|---|---|
| $30,977 | $31,977 | $33,000 | $27,977 | $25,000 | $40,899 |
| Grand Prairie | Grand Prairie | Lufkin | Grand Prairie | Mansfield | Katy |
| 19' | 19' | 19' | 19' | 18' | 19' |
| - | - | - | - | Mercury | MERCURY MARINE |
| - | - | 200 hp | - | 150 hp | 150 hp |
| 88 | 550 | 11 | 90 | 20 | 582 |
Other Nitro Z18 boats for sale in Texas, United States
Other Nitro boats for sale in Texas, United States
Meet the Broker
Address
Boat Location
Contact Boaters World Marine Centers Texas about 2019 Nitro Z18
5734 Lake Ridge Pkwy, Grand Prairie, TX, 75052
Login with Google