2020 Nitro Z18 Boat in Mcallen, TX 78501 US
Built in 2020
Z18
1 Engine (--)
18 feet
Gas
Other
Key Features:
- Mercury 150 Pro XS outboard with only 121 hours
- Minn Kota Fortrex trolling motor
- Two 9" Lowrance fish finder/chartplotter displays
- 9" Garmin display with LiveScope
- Hydraulic jack plate
- Hot Foot throttle
- 4-bank onboard battery charger
- Custom trailer
- Trick Steps trailer boarding system
- Spare tire
Quality - Put your mind at ease knowing Ocean Marine has been in business since 1982 and we carry only the best Pre-Owned boats that you can find. All boats are water tested and thoroughly inspected by a certified technician prior to being listed on our website. This ensures we consistently offer quality boats!
Process - We also provide an on-the-water demonstration to make sure you are comfortable with the use and operation of your new boat! In addition, we make out-of-town buying easy. Ask your sales representative for details.
Financing - We are partnered with over 20 lenders, both locally and nationally. With an experienced finance department we are able to offer competitive finance packages to meet the needs and terms of our customers.
Peace of Mind - We also offer packages to protect your investment on most of our pre-owned boats. Coverage options that can include protection for your engine, electronics, interior, exterior, trailer, and total loss protection.
Price History
| Date | Event | Price |
|---|---|---|
| 8/18/26 | Initial price | $34,995 |
Nitro Z18: BoatTEST Review
Overview
The Nitro Z18 bass boat is an 18-foot 8-inch vessel designed for serious bass anglers seeking high performance and speed. Powered by Mercury's new 150 horsepower 3.0-liter inline 4 Pro XS 4-stroke outboard engine, the Z18 aims to deliver improved torque, acceleration, and overall efficiency compared to its predecessor, the Mercury 2-stroke Optimax. This review provides a comprehensive evaluation of the boat's performance, design, and features.
Power and Performance
The Mercury 150 Pro XS engine powering the Nitro Z18 is based on a 3.0-liter inline 4-cylinder block introduced in 2012 but features significant enhancements. It boasts the highest displacement and lowest weight in its class at 456 pounds, along with the highest alternator output of 60 amps. Key improvements include transient spark calibration that increases torque by 5 to 7 percent for better acceleration, a revised gear ratio of 2.08:1 in the 4.8-inch gear case to boost torque, and four raw water pickups in the gear case nose cone allowing for higher engine mounting and greater trim flexibility. During testing with two people aboard and a full fuel tank, the Z18 reached a top speed of 60.2 miles per hour at wide open throttle using a 25-inch Fury 4-blade propeller. Cruising at 3,000 RPM yielded 25.7 miles per hour and 6.4 miles per gallon, providing a range of 231 statute miles with a 10% fuel reserve. The boat demonstrated quick acceleration, planing in 4.1 seconds, reaching 20 mph in 4.6 seconds, and 30 mph in 6.4 seconds. Handling was responsive with smooth sweeping turns at moderate speeds.
Exterior Design and Deck Layout
The Nitro Z18 features a beam of 7 feet 10 inches and provides ample deck space for fishing activities. Access to the boat is facilitated by a fold-up ladder located on the port side. The aft fishing deck measures 6 feet 7 inches by 2 feet 3 inches, offering generous casting room. Underneath the deck hatches are compartments housing the batteries, a 30-gallon divided live well, and dry storage with removable plastic tubs on either side. The forward fishing area spans 6 feet 7 inches wide at the aft section, tapering to 5 feet 2 inches forward, with a depth of 4 feet 2 inches at the forward aft area. This space includes a wastebasket and a 62-quart draining cooler that can be outfitted with an optional sandwich tray. Additional exterior features include four 4.5-inch pull-up cleats, cup holders, and tool racks mounted outboard on each side. The boat is equipped with a Minn Kota Maxim trolling motor delivering 70 pounds of thrust and controlled by a foot pedal, enhancing maneuverability in fishing scenarios. The Z18 is trailered on a single-axle unit with a swing-away tongue, carpeted bunks, and a motor support, making it a ready-to-use package.
Helm and Controls
The helm console is designed for ergonomic operation and comfort. It is topped with a windscreen and features an instrument panel centered around a 5-inch Lowrance Hook 5X fish finder. Flanking the fish finder are SmartKraft multifunction gauges, with the tachometer positioned to port and the speedometer to starboard. The steering wheel is mounted on a tilt hydraulic helm for adjustable driver comfort. The throttle and shift controls are conventional mechanical units, with a remote trim switch allowing the engine to be tilted up for trailering. The boat includes a master power switch adjacent to the ignition key that disables electrical power to accessories, preventing battery drain. Storage for fishing rods is conveniently located ahead of the companion seat on the port side, complemented by a rubber mat on the gunwale to protect reel finishes.
Additional Engine Features and Maintenance
The Mercury 150 Pro XS engine incorporates several practical design elements to enhance durability and ease of maintenance. The gear case includes low water pickups that facilitate higher engine installation and compatibility with jack plates, beneficial for navigating shallow waters. Engine mounts have been stiffened slightly to improve stability. The engine cowl features updated graphics and a streamlined profile. A maintenance decal is prominently displayed on the motor's side for quick reference. The alternator's 60-amp output is the highest among four-cylinder four-stroke engines, and the idle charge battery management system automatically increases idle speed to produce 20 amps when low battery voltage is detected, ensuring reliable battery maintenance.
Conclusion
The Nitro Z18 bass boat, equipped with Mercury's 150 Pro XS outboard, represents a well-rounded package for bass anglers who prioritize speed, torque, and functional fishing features. Its combination of advanced engine technology, efficient fuel consumption, responsive handling, and thoughtfully designed fishing spaces makes it a competitive choice in its class. The inclusion of standard equipment such as the Minn Kota trolling motor and a quality trailer further enhances its value as a turnkey fishing platform.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Texas, United States Similar to the 2020 Nitro Z18
Compare with similar boats and find the perfect one for you.
 2020 Nitro Z18 | ||||||
|---|---|---|---|---|---|---|
| Price | $34,995 | $34,995 | $34,995 | $34,995 | $35,000 | $32,500 |
| Location | Mcallen | Beaumont | Conroe | Corpus Christi | Yantis | Yantis |
| Nominal Length | 18' | 18' | 18' | 18' | 19' | 20' |
| Engine Make | - | - | - | - | Mercury | Mercury |
| Total Engine Power | 150 hp | 150 hp | 150 hp | 150 hp | 200 hp | 250 hp |
| Days on Market | 13 | 12 | 12 | 13 | 14 | 388 |
| Get in touch |
Other 2020 Nitro Z18 For Sale in Texas, United States
Other Nitro Z18 boats for sale in Texas, United States
Other Nitro boats for sale in Texas, United States
Meet the Broker
Address
Boat Location
Contact Premier Boating Centers - Corpus Christi, TX about 2020 Nitro Z18
5246 Lexington Road, Corpus Christi, TX, 78412
Login with Google