2017 Nitro Z18 Sold Boat in Moncks Corner, SC 29461 US
Built in 2017
Z18
1 Engine (Mercury)
18.7 feet
Gas
Fiberglass/Reinforced
Boats For Sale in South Carolina, United States Similar to the 2017 Nitro Z18
Compare with similar boats and find the perfect one for you.
 2017 Nitro Z18 | ||||||
|---|---|---|---|---|---|---|
| Price | $27,980 | $28,190 | $28,190 | $28,370 | $28,499 | $28,760 |
| Location | Moncks Corner | Columbia | Columbia | Fort Mill | Fort Mill | Moncks Corner |
| Nominal Length | 19' | 18' | 18' | 18' | 18' | 18' |
| Engine Make | Mercury | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE |
| Total Engine Power | 175 hp | 75 hp | 75 hp | 75 hp | 75 hp | 75 hp |
| Days on Market | 567 | 378 | 169 | 15 | 97 | 28 |
| Get in touch |
Other Nitro boats for sale in South Carolina, United States
2017 Nitro Z18
The quick and compact 2017 NITRO® Z18 is based on our revolutionary NITRO® Vortex Technology™ (NVT™) hull with Rapid Planing System™, giving you a smooth, soft and dry ride along with a brisk holeshot and precise handling when turning and at the top end. The interior of the Z18 is laid out to provide the ultimate in fishability, and the NASCAR®-inspired seats give you the most comfortable ride possible. One of the best-selling fiberglass bass boats in the world, the NITRO Z18 is the boat of choice for everyone from the weekend warrior to the hardcore tournament contender.
Features may include:
Comfort, Convenience and Peace Of Mind
- NMMA® certified
- Flotation meets or exceeds NMMA® and U.S. Coast Guard requirements
- EPA-compliant fuel system
- Non-skid mats bow and stern
- 6 drink holders
- 4 stainless steel pull-up cleats
- Integrated fold-down stainless steel reboarding ladder
- 2 grab handles (1 at passenger, 1 at transom)
- Fire extinguisher
- Horn
- Paddle
Console
- Flush-mounted Lowrance® HOOK-5x fishfinder w/480x480 pixel display, surface temperature and down imaging
- Hydraulic steering w/tilt
- Removable acrylic, tinted windscreen
- Ready to accept optional removable port console
- Custom-molded modular console w/2-tone gelcoat
- Veethree® multi-function instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge and water pressure gauge
- Dash light dimmer
- Water-resistant switch panels
- LED courtesy light
- Below-console 12V outlet
Construction and Exterior
- Deck and hull chemically bonded and mechanically fastened w/stainless steel fasteners
- Gelcoated stringer/liner system
- Foam-filled hull for optimal buoyancy and safety
- Full-width fiberglass-encapsulated composite transom
- Low-profile gunnels to maximize deck size and for easier casting
Electrical
- Bow panel w/trolling motor receptacle, anchor/light switch, trim switch and capability to flush mount 12" (30.5 cm) graph
- 1,000 GPH (3,785 LPH) bilge pump
- LED console courtesy light
- Bow navigation lights integrated into gunnels w/stowable stern light
- Automotive-style labeled fuse panel w/cover
- Interstateandreg; cranking battery
- 2 heavy-duty Interstate® Series 29 trolling batteries
- 2-bank, 8-amp battery charger w/exterior receptacle
- 6-gauge trolling motor wiring w/50-amp circuit breaker
- Master power switch
- Waterproof Deutsch plugin gauge connectors
- Water/abrasion-resistant connectors
Interior
- 34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility w/lots of storage
- Step-up to bow deck w/62-qt. (58.7 L) insulated cooler and removable trash receptacle
- NASCAR®-inspired helm and passenger bucket seats
- Bike seat w/pedestal
- Folding fishing seat w/composite frame
- Trolling motor pedal recess for Minn Kota® and MotorGuide® trolling motors
- Oversized, lockable port and starboard bow rod lockers w/lift assists for rods up to 8' (2.44 m)
- Molded-in drainage channels around bow storage compartments
- Port and starboard bow rod hold-down straps
- Oversized lockable center bow storage locker
- Partner rod ramp w/rod handle organizer and rod holder strap
All our pre-owned boats go through an extensive checklist, making sure that we offer boats that pass our standards.
**Trades considered for boats, cars, trucks, campers, motorcycles, golf carts, ATVs and more! Call 843-761-2628 for more information! PRICE DOES NOT INCLUDE TAXES OR REGISTRATION FEES.** Stock#: UB84699E
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Nitro Z18: BoatTEST Review
Overview
The Nitro Z18 bass boat is an 18-foot 8-inch vessel designed for serious bass anglers seeking high performance and speed. Powered by Mercury's new 150 horsepower 3.0-liter inline 4 Pro XS 4-stroke outboard engine, the Z18 aims to deliver improved torque, acceleration, and overall efficiency compared to its predecessor, the Mercury 2-stroke Optimax. This review provides a comprehensive evaluation of the boat's performance, design, and features.
Power and Performance
The Mercury 150 Pro XS engine powering the Nitro Z18 is based on a 3.0-liter inline 4-cylinder block introduced in 2012 but features significant enhancements. It boasts the highest displacement and lowest weight in its class at 456 pounds, along with the highest alternator output of 60 amps. Key improvements include transient spark calibration that increases torque by 5 to 7 percent for better acceleration, a revised gear ratio of 2.08:1 in the 4.8-inch gear case to boost torque, and four raw water pickups in the gear case nose cone allowing for higher engine mounting and greater trim flexibility. During testing with two people aboard and a full fuel tank, the Z18 reached a top speed of 60.2 miles per hour at wide open throttle using a 25-inch Fury 4-blade propeller. Cruising at 3,000 RPM yielded 25.7 miles per hour and 6.4 miles per gallon, providing a range of 231 statute miles with a 10% fuel reserve. The boat demonstrated quick acceleration, planing in 4.1 seconds, reaching 20 mph in 4.6 seconds, and 30 mph in 6.4 seconds. Handling was responsive with smooth sweeping turns at moderate speeds.
Exterior Design and Deck Layout
The Nitro Z18 features a beam of 7 feet 10 inches and provides ample deck space for fishing activities. Access to the boat is facilitated by a fold-up ladder located on the port side. The aft fishing deck measures 6 feet 7 inches by 2 feet 3 inches, offering generous casting room. Underneath the deck hatches are compartments housing the batteries, a 30-gallon divided live well, and dry storage with removable plastic tubs on either side. The forward fishing area spans 6 feet 7 inches wide at the aft section, tapering to 5 feet 2 inches forward, with a depth of 4 feet 2 inches at the forward aft area. This space includes a wastebasket and a 62-quart draining cooler that can be outfitted with an optional sandwich tray. Additional exterior features include four 4.5-inch pull-up cleats, cup holders, and tool racks mounted outboard on each side. The boat is equipped with a Minn Kota Maxim trolling motor delivering 70 pounds of thrust and controlled by a foot pedal, enhancing maneuverability in fishing scenarios. The Z18 is trailered on a single-axle unit with a swing-away tongue, carpeted bunks, and a motor support, making it a ready-to-use package.
Helm and Controls
The helm console is designed for ergonomic operation and comfort. It is topped with a windscreen and features an instrument panel centered around a 5-inch Lowrance Hook 5X fish finder. Flanking the fish finder are SmartKraft multifunction gauges, with the tachometer positioned to port and the speedometer to starboard. The steering wheel is mounted on a tilt hydraulic helm for adjustable driver comfort. The throttle and shift controls are conventional mechanical units, with a remote trim switch allowing the engine to be tilted up for trailering. The boat includes a master power switch adjacent to the ignition key that disables electrical power to accessories, preventing battery drain. Storage for fishing rods is conveniently located ahead of the companion seat on the port side, complemented by a rubber mat on the gunwale to protect reel finishes.
Additional Engine Features and Maintenance
The Mercury 150 Pro XS engine incorporates several practical design elements to enhance durability and ease of maintenance. The gear case includes low water pickups that facilitate higher engine installation and compatibility with jack plates, beneficial for navigating shallow waters. Engine mounts have been stiffened slightly to improve stability. The engine cowl features updated graphics and a streamlined profile. A maintenance decal is prominently displayed on the motor's side for quick reference. The alternator's 60-amp output is the highest among four-cylinder four-stroke engines, and the idle charge battery management system automatically increases idle speed to produce 20 amps when low battery voltage is detected, ensuring reliable battery maintenance.
Conclusion
The Nitro Z18 bass boat, equipped with Mercury's 150 Pro XS outboard, represents a well-rounded package for bass anglers who prioritize speed, torque, and functional fishing features. Its combination of advanced engine technology, efficient fuel consumption, responsive handling, and thoughtfully designed fishing spaces makes it a competitive choice in its class. The inclusion of standard equipment such as the Minn Kota trolling motor and a quality trailer further enhances its value as a turnkey fishing platform.
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Want to update the details or images for this boat? Claim this listing by getting in touch.
Boat Location
Contact Berkeley Outdoors of Moncks Corner about 2017 Nitro Z18
2564 S Live Oak Drive, Moncks Corner, SC, 29461
Login with Google