2013 Nitro Z-7 Sold Boat in Stuttgart, AR 72160 US
Built in 2013
Z-7
1 Engine (Mercury)
18.7 feet
Gas
Fiberglass/Reinforced
Boats For Sale in Arkansas, United States Similar to the 2013 Nitro Z-7
Compare with similar boats and find the perfect one for you.
 2013 Nitro Z-7 | ||||
|---|---|---|---|---|
| Price | $18,000 | $19,595 | $20,365 | $20,365 |
| Location | Stuttgart | Fort Smith | Stuttgart | Fort Smith |
| Nominal Length | 19' | 17' | 17' | 17' |
| Engine Make | Mercury | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE |
| Total Engine Power | 150 hp | 50 hp | 50 hp | 50 hp |
| Days on Market | 163 | 28 | 28 | 28 |
| Get in touch |
Other Nitro boats for sale in Arkansas, United States
Head of the class. Top of the leaderboard.
Take the Z-7 out just once, and you'll quickly realize why this performance bass boat is the best selling in its segment.
For one, it can haul, thanks to the combination of the NITRO® performance hull, Rapid Planing System and 150-horsepower Mercury® motor.
More than that, though, inside, it's absolutely loaded with all the room and features club and state anglers need. 24-volt trolling motor. Trailer. Fishfinder. Storage. Rod holders. More storage. Onboard battery charger.
And, it's ready for our exclusive removable port console!
All so you can fish your way to the top of the leaderboard.
- Rapid Planing System transom
- Ready-to-accept optional removable port console
- Fold-down reboarding ladder
- 32-gal. (121.13 L) divided, aerated aft livewell w/recirculator, timer & pump-out system
- 3-across seating w/steps to aft deck & helm & buddy suspension systems
- 2 rod lockers & center bow storage locker w/power lid assists
- Easy-to-read instrumentation & tinted windscreen
- Flush-mounted Lowrance® Mark-5x fishfinder
- Step to bow deck w/cooler & trash receptacle
- Bow bicycle seat & aft folding chair
- Minn Kota® Maxxum® 24V, 70-lb. thrust foot-controlled trolling motor
- Custom-matched trailer w/GALVASHIELD® corrosion protection, swing-away tongue & EZ lube hubs
- Length: 18' 8"
- Bottom width: 75"
- Max. recommended HP: 150 HP
- Package width: 8' 6"
- Fuel capacity: 41 Gallons
- Deadrise: 16 Degrees
- Draft: 15"
- Beam: 94"
- Approx. weight: 1650 Lbs.
- Approx. package weight: 3200 Lbs.
- Max. person capacity: 4 Persons
- Depth inside: 19"
- Transom height: 22.5"
- Max. weight capacity: 1390 Lbs.
- Max. person weight: 600 Lbs.
- Storage length: 20' 11"
Comfort, Safety & Convenience
- Non-skid bow mat
- Horn
- Fire extinguisher
- 4 drink holders
- Stainless steel passenger grab handle(s)
- EPA-compliant fuel system
- Stainless steel bow & stern eyes
- 4 pull-up cleats
- 2 molded-in steps for sure-footed, easy access to aft deck
- Paddle
- Integrated fold-down reboarding ladder
- Flotation meets or exceeds NMMA & U.S. Coast Guard requirements
Console(s)
- Courtesy light
- Custom-molded modular console w/2-tone paint scheme
- Flush-mounted Lowrance® Mark-5x Pro fishfinder w/480x480 pixel display & surface temperature
- Full instrumentation w/speedometer, tachometer, voltmeter, fuel gauge, water pressure gauge & trim gauge
- Dash light dimmer switch
- Ready to accept optional removable port console
- Recess for optional Hot Foot pedal
- Hydraulic steering
- Removable molded, tinted windscreen
- Switch panels w/water-resistant switches
Construction & Exterior
- Deck & hull mechanically fastened w/stainless steel fasteners
- Hand-laid hull
- Transverse & longitudinal fiberglass foam-filled stringer system
- Full-width fiberglass-encapsulated composite transom
- 16-oz. plush, marine-grade carpet on decks & floor
- Carpet edge trim
- Low-profile gunnels to maximize interior space & fishing decks
- Heavy-duty rub rail
Electrical
- Stowable navigation lights
- Interstate® cranking battery
- Water-resistant connectors on all pumps & navigation lights w/abrasion-protective wrap
- Automotive-style labeled fuse panel w/cover
- 1,000 GPH bilge pump
- Bow panel w/trolling motor receptacle, anchor light switch, trim switch & room for additional depth finder
- 2 heavy-duty Interstate® Series 29 trolling batteries
- 2-bank (8 amps total) battery charger w/exterior receptacle
- 12V outlet
Interior
- Footrest w/non-skid mat under console(s)
- Bike seat w/pedestal
- Elevated fore & aft casting decks
- Oversized port & starboard bow rod lockers w/lid assists for rods up to 8' (2.44 m)
- Port & starboard bow rod hold-down straps
- Molded utility rigging compartment for easy access to batteries & pumps
- Fold-down fishing seat w/composite frame
- Highly styled seating w/shock absorption system for helm & passenger seats
- Oversized center bow storage box
- Partner rod storage w/rod handle organizer & rod holder strap
- Step to bow deck w/insulated cooler & removable trash receptacle
- Insulated aluminum lids w/welded corners
- Trolling motor pedal recess for Minn Kota & MotorGuide® trolling motors
- Lift-out, molded aft storage boxes that will accept tackle trays
- Lockable bow & aft storage compartments
Livewell Systems
- 32-gal. (121.13 L) aerated, divided aft livewell w/timer
- Rotomolded w/rounded corners
- 750 GPH livewell recirculation/pump-out system
- 500 GPH (1,892.71 LPH) aerator/fill pump
Performance
- 16-degree variable deadrise hull for a smoother, drier ride
- Rapid Planing System transom
- Rigging tube
- Stainless steel propeller
Trailer
- Color-coordinated, single-axle drive-on NITRO trailer
- Spare tire carrier (spare tire optional)
- All-welded tubular frame for a unitized structure w/an exceptional strength-to-weight ratio
- 14" (35.56 cm) tires & wheels w/chrome center cap
- Folding tongue jack w/swivel wheel
- Powder-coat finish
- Space-saving swing-away tongue
- Heavy-duty winch w/nylon strap w/bow safety strap
- Carpeted bunks
- GALVASHIELD® corrosion protection
- Non-skid fender platforms
- Retractable safety cables
- Submersible lights
- Tie downs
- Transom saver
Trolling Motor
- Minn Kota® Maxxum® 24V, 70-lb. thrust, 42" shaft foot-controlled trolling motor
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
Price History
| Date | Event | Price |
|---|---|---|
| 4/2/26 | Price increased | $18,000(+12.5%) |
| 4/1/26 | Initial price | $16,000 |
2013 Nitro Z-7 Video Tours
Nitro Z-7: BoatTEST Review
Overview
The Nitro Z7 is a versatile bass boat designed to deliver both performance and comfort for serious anglers. Measuring 18 feet 8 inches in length overall with a 94-inch beam and a shallow 15-inch draft, the Z7 is capable of accessing skinny water with ease. It features a 16-degree variable dead rise hull and is offered with a standard 150 horsepower Mercury Pro XS outboard, rated up to 175 horsepower, providing a balance of power and efficiency. The boat is available in single or dual console configurations, with the dual console being easily removable to suit different fishing preferences.
Fishing Features and Deck Layout
The Z7 offers spacious casting decks at both the bow and stern, allowing anglers to move freely even with pedestal seats installed. These seats are positioned at a comfortable height and are supported by gas struts for ease of use. Central to the deck is a 32-gallon aerated and divided livewell equipped with a 500-gallon Brouwer recirculating pump and an aerator timer, featuring rounded corners for improved water flow. Courtesy lights are conveniently controlled directly at the light fixtures, eliminating the need to search for switches at the helm. The foredeck houses a recessed well for the foot control of the standard Minn Kota 42-inch shaft trolling motor, which delivers 70 pounds of thrust and includes a directional arrow for intuitive heading control. Optional trolling motors with shafts up to 52 inches and thrusts up to 80 pounds are also available. Rod storage is ample, with lockable compartments beside the passenger seat and under the forward casting deck, capable of holding rods up to eight feet. Bungee cords at the bow secure rods during transit. Additional removable storage bins flank the aft casting deck, complemented by an insulated cooler and a trash receptacle with molded finger cutouts for easy handling. The foredeck also features dedicated dry storage and a designated spot for the navigation light.
Operational Features and Helm
The Z7’s helm is thoughtfully designed for both comfort and functionality. It includes three-across seating with steps between seats, an improvement over previous models that required stepping on a folded center seat. The helm panel features a master power switch and white-faced gauges with chrome bezels, including a standard Lowrance Mark V FX Pro fishfinder. Rocker switches for the livewell aerator and recirculating pump are conveniently located to the right of the leather-wrapped, tilt-mounted three-spoke steering wheel. Flip-up cleats reduce snag hazards, and a reboarding step is positioned on the port side. The wiring harness is neatly channeled to the Mercury Optimax engine, with onboard storage for three batteries and the oil tank, which can be optionally equipped with a remote fill system. The dual console option can be removed via three attachment points, providing flexibility in layout.
Power and Performance
Powered by a 150 horsepower Mercury Pro XS outboard, the Nitro Z7 demonstrated impressive performance during testing. With an estimated test weight of 2,624 pounds, including half fuel and two passengers, the boat reached a top speed of 62 miles per hour at 5,600 RPM, consuming 13.75 gallons per hour for a range of approximately 166 miles. Its optimal cruise speed was identified at 28.4 miles per hour at 3,000 RPM, reducing fuel burn to 3.9 gallons per hour and extending range to 268 miles over 9.5 hours. The rapid planing system enabled a quick time to plane of 3.3 seconds, with acceleration milestones of 20 mph in 5 seconds, 30 mph in 7.4 seconds, 40 mph in 11.6 seconds, and 50 mph in 17.5 seconds. The boat exhibits a 10-degree bow rise during acceleration, which can be trimmed to achieve a smooth running pad with minimal spray. The hull’s design minimizes chine walking at high speeds, even in choppy conditions, with responsive steering allowing quick corrections. The windscreen effectively deflects wind off the operator’s face, although removing the port console increases cockpit space at the expense of wind protection for the passenger.
Conclusion
The Nitro Z7 stands out as a well-built, comfortable, and highly maneuverable bass boat. Its combination of thoughtful fishing features, efficient powertrain, and refined handling make it a strong contender in its class. The boat’s aesthetic appeal is enhanced by multiple standard and optional color packages, and it comes standard with a powder-coated, color-matched single-axle trailer equipped with 14-inch wheels. Overall, the Z7 offers anglers a capable platform that balances performance with practical fishing amenities.
Overview from around the web 2013 Nitro Z-7
Customers praise the 2013 Nitro Z-7 for its exceptional performance on the water, highlighting its smooth handling and powerful engine
Many appreciate the spacious and comfortable layout, which makes it ideal for both fishing and family outings. Anglers often mention the boat’s ample storage and well-designed fishing features, such as multiple rod holders and a large livewell. Overall, users find the Nitro Z-7 to be a reliable, versatile, and well-built boat that delivers great value for its class.
The Biggest Pros and Cons
The 2013 Nitro Z-7 offers a range of features that appeal to fishing enthusiasts, but like any boat, it has its strengths and weaknesses. Here are some pros and cons to consider:
Pros
Spacious Layout: The Z-7 provides ample deck space, making it comfortable for multiple anglers and easy to move around while fishing.
Quality Construction: Built with durable materials, the boat is designed to withstand various water conditions and provide long-lasting performance.
Powerful Engine Options: Equipped with reliable engine choices, it delivers strong performance and good fuel efficiency for its class.
Advanced Fishing Features: Includes features such as multiple storage compartments, rod holders, and a fish finder-ready console, enhancing the fishing experience.
Smooth Handling: The hull design offers stability and smooth handling, even in choppy waters.
Cons
Limited Seating Capacity: While spacious for fishing, the seating may be limited for larger groups or family outings.
Basic Comfort Amenities: The focus on fishing means fewer luxury or comfort features compared to recreational boats.
Storage Constraints: Although there are several compartments, some users may find storage space insufficient for extended trips or larger gear.
Older Electronics: Depending on the specific model and upgrades, onboard electronics might be less advanced compared to newer models.
Made For
The 2013 Nitro Z-7 is designed for serious anglers who demand high performance and versatility on the water. Ideal for both freshwater and tournament fishing, this boat caters to fishermen looking for a durable, fast, and feature-packed vessel that can handle a variety of fishing conditions while providing ample storage and advanced technology to enhance the fishing experience. Whether you're a weekend angler or a competitive tournament fisherman, the Nitro Z-7 offers the reliability and functionality needed for a successful day on the water.
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Want to update the details or images for this boat? Claim this listing by getting in touch.
Boat Location
Contact Mack’s Prairie Wings about 2013 Nitro Z-7
2335 Hwy 63 North, Stuttgart, AR, 72160
Login with Google