2025 Hell's Bay Marathon Boat in Dunedin, FL 34698 US

2025 Hell's Bay Marathon | Yamaha F70 | 38 Hours | Warranty to 2030
$89,900 | Dunedin, Florida

Offered by The Skiff Broker / Florida Native Boat Sales is this exceptionally clean, original-owner 2025 Hell's Bay Marathon, finished in beautiful factory Pearl White and powered by a Pearl White Yamaha F70 with just 38 hours.

This Marathon presents very close to new and was thoughtfully factory-optioned for an angler looking for the open-water capability the Marathon is known for without sacrificing the simplicity, fishability and shallow-water performance expected from a Hell's Bay.

The current owner purchased the boat new and is simply changing boating styles and moving toward a larger center console. The boat is now located in Dunedin, Florida and is available for inspection by appointment.

A major bonus for the next owner is the remaining Yamaha coverage. Yamaha factory warranty is confirmed through July 21, 2028, followed by Yamaha Y.E.S. extended coverage through July 22, 2030.

POWER & PERFORMANCE

Power comes from a Pearl White Yamaha F70 four-stroke showing only 37.6 hours through the Simrad/Yamaha NMEA network.

The F70 is mounted on a Bob's Action Series 6" hydraulic jack plate and paired with a PowerTech three-blade 16-pitch prop. Jack-plate control is conveniently located on a blinker-style switch at the helm.

The hull is also equipped with Electrotab trim tabs utilizing Hell's Bay's custom tab configuration designed to maintain clean shallow-water clearance.

The Marathon is Hell's Bay's open-water-oriented technical skiff, combining its sharp forward entry and prominent integrated spray rails with a 12-degree deadrise and broad aft running surface. The result is a remarkably capable platform for crossing open bays and dealing with afternoon chop while retaining true technical-skiff fishability.

HELM & ELECTRONICS

The compact center console keeps the cockpit open while providing an excellent helm position and high-end equipment.

Features include:

• Simrad NSS9 evo3S 9" multifunction display
• Active Imaging 3-in-1 transducer
• Yamaha engine data integrated through NMEA 2000
• Simrad chartplotter, sonar and engine-monitoring capability
• Polished Edson stainless-steel steering wheel
• Hydraulic steering
• Bob's jack-plate blinker control
• Electrotab trim-tab controls
• Hell's Bay switch panel
• Stainless-steel hook pull / knot-tightening point
• Overhead aluminum grab rail
• Fully molded and gelcoated console access door
• Interior console storage/catch-all
• Master battery switch
• Optima BlueTop starting/house battery
• Power-Pole MOVE remote with charging cradle
• Clean, accessible fuse and electrical panels

POWER-POLE MOVE & LITHIUM BATTERY SYSTEM

At the bow is a white Power-Pole MOVE trolling motor mounted on a Power-Pole quick-release system.

The trolling motor operates from a dedicated 24V system utilizing two Dakota Lithium 12V 54Ah LiFePO4 batteries wired in series.

Charging is handled by a NOCO Genius GENPRO 10x3 three-bank smart charger, allowing the trolling-motor batteries and starting battery to be maintained from one system.

The trolling-motor power connection is conveniently located on the forward bulkhead.

FORWARD CASTING DECK

The Marathon offers an unusually large forward casting deck for a skiff under 18 feet, with enough room for multiple anglers to comfortably spin fish.

A removable Hell's Bay elevated casting platform provides an additional sight-fishing position and is finished with Snow Camo SeaDek.

Additional bow features include:

• Large forward storage compartment
• Approximately 28-gallon fuel tank
• Convenient fuel dipstick stored beneath forward hatch
• Centerline fuel fill
• Snow Camo SeaDek forward hatch pad
• Three under-gunwale rod tubes per side
• Six total large-diameter rod tubes
• Fly-rod-capable storage
• Snow Camo SeaDek reel-protection pads
• Four 4.5" stainless-steel pull-up cleats
• Battery Tender trolling motor power connection
• On-board charger power connection

COCKPIT & SEATING

One of this boat's strengths is how open and configurable the cockpit remains.

A 35-quart Yeti cooler with custom upgraded silicone upholstered cushion serves as the primary removable helm seat. Remove it entirely when maximum cockpit space is desired.

The front of the console incorporates an upholstered backrest that provides another comfortable seating position.

The all-white interior, Pearl White hull and Cloud-colored upgraded upholstery give the boat a very clean and cohesive appearance.

AFT DECK, LIVEWELL & STORAGE

Three large aft compartments maximize usable deck and storage space.

The port and starboard lockers are deep, finished storage compartments with factory-added drains into the bilge. Hell's Bay's unlined locker construction maximizes interior storage volume and minimizes unnecessary weight.

The center compartment is a fully plumbed raw-water livewell with an ice-blue interior for improved bait visibility.

Other aft-deck details include:

• Slam-latch hatch hardware
• Deep hatch gutters
• Gasketed lids
• Easily accessible fuel/water separator
• Separate enclosed bilge/lazarette access
• Rule bilge pump
• High-speed livewell pickup and pump
• Excellent plumbing and systems accessibility
• Above-waterline splashwell drainage

POLING TOWER

The anodized aluminum poling tower is one of the visual highlights of the boat and was extensively optioned from Hell's Bay.

It includes:

• Large Snow Camo SeaDek poling platform
• Fold-down forward step/backrest
• Anodized removable sissy/lean bar
• Port-side bucket hoop sized for a 5-gallon/Yeti-style bucket
• Tibor push-pole holder
• Additional factory step incorporated with the jack-plate configuration

The fold-down upholstered backrest provides comfortable support for both the helmsman and passenger while underway and folds away when not needed.

TRAILER

The boat sits on its custom Ram-Lin aluminum trailer, specifically built for the boat and included in the sale.

Trailer equipment includes:

• Aluminum construction
• Stainless-steel axle
• Swing-away tongue for easier garage storage
• Aluminum wheels
• Guide hardware and bunks configured for the Marathon
• Matching factory package

BOAT & TRAILER DIMENSIONS

• Boat LOA: 17'8"
• Boat beam: 73"
• Overall length on trailer, swing tongue folded: 21'4"
• Overall trailer width: 85" (7'1")
• Overall height on trailer: 74" (6'2")

WARRANTY

Yamaha factory warranty through 7/21/2028
Yamaha Y.E.S. coverage through 7/22/2030

CONDITION

With fewer than 40 hours of use, this boat shows exceptionally well throughout. Hull sides, decks, upholstery, aluminum work, electronics, engine, running gear and trailer all present in "like new" condition and reflect very light use.

This is an opportunity to acquire a nearly new, properly optioned Marathon without starting a new build.

Located in Dunedin, Florida.

Contact:

Matt Norman | The Skiff Broker
Florida Native Boat Sales
two-three-nine-849-4719

Tags: Hell's Bay Boatworks, Chittum Skiffs, Chittum Islamorada 18, Maverick, Maverick HPX, Beavertail Skiffs, Hell's Bay Whipray, East Cape Skiffs, Hell's Bay Waterman, Hell's Bay Professional, Hell's Bay Marquesa, East Cape Vantage, Eat Cape Evo, Beavertail Vengeance, 17HPX V, 18HPX V, Dolphin Super Skiff, Floyd Skiffs, 10wt, Drake Boatworks.