1995 Camano Troll Sold Boat in Olympia, WA 98501 US

The Keelform hull is the result of a science program of the University of British Columbia and Camano Marine. Keelform is a unique bottom shape with large displacement keel and very wide waterline beam. Test results show almost no planing angle change or "hump" in the horsepower curve between displacement and planing speeds which, in the case of a boat this size, is between 7 and 15 knots. While most semidisplacement boats are straining and reaching their horsepower limit, the Camano is cruising comfortably up to 18 knots. The hull reduces fuel consumption in the most widely used speed range - between 12 and 18 knots; can be stabilized to prevent the boat from rolling in rough seas; runs 19 - 20 knots top speed, with a single 200 hp Diesel engine; and provides a smooth, dry ride in rough water because of a special flare in the bow section. 

Most boat builders whose brochures mention "hand-laid fiberglass" use chopper guns to replace the traditional fiberglass mats by "chopped strand," which are only two-inch long glass fibers wetted with resin by the "chopper gun" and sprayed into the mold. Only the woven rovings are rolled or "laid in" by hand. The hull of the Troll is 100 per cent hand-laid, with no "chopped strand," and thicker than the hulls of comparable production boats. The boat has a heavily built, very strong inner liner laminated into the lower portion of the hull; the bulkheads are thoroughly laminated into place from both sides as are the other parts of the interior. The impact and tear strength of a Camano hull is ten times higher than most production boats. Running aground with the Troll is not a problem. Prop, prop shaft and rudder of the Camano are protected by a heavily reinforced skeg and keel shoe. The inboard diesel combined with the electric bow thruster result in a handling advantage.

The Camano features an open cruising layout (salon and aft deck on the same level), with a full-size bridge. The open, bright interior provides great visibility from any part of the seating area with its picture window view. The interior is light and friendly. Cabinets and trim are mahogany, the cushions are covered with premium fabrics and the floor is either oak or carpeted. Accommodations are as open as possible - the salon measures 8-feet, 10-inches by 10 feet and is on the same level as the aft deck which is 40 square feet. The galley and head are half a level down, with a U-shaped galley out of the traffic area but still open to the salon. With a large counter area extending under the sidedecks there is lots of room for full-sized stove with oven, refrigerator, microwave, and large sink. Storage space is provided including dish locker outboard of the fridge. The shower is built in as a part of the head area. The dinette easily converts to a double berth while the forward berth has a filler available to make a double.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.