1990 Bristol Channel Cutter BCC 28 Boat in Hampton, VA 23664 US
Built in 1990
BCC 28
1 Engine (Yanmar)
28 feet
Diesel
Fiberglass/Reinforced
Introducing SV See Dream
1990 Bristol Channel Cutter
Bristol Channel Cutter, See Dream, is a wonderful example of the Lyle Hess-designed and Sam Morse-built Bristol Channel Cutter.
1992 Bristol Channel Cutter BCC 28 Hull #71 is a hull and deck version that was purchased by a Franz who took 5 years to finished her off himself to Sam Morse factory levels and was launched in 1992.
See Dream was launched in Bellingham WA in 1992 where she was sailed in the Northwest until she was trucked to the east coast in 1997 for her first of 2 Atlantic Crossings.
For over 25 years See Dream was typically sailed for 2 months each summer in the Mediterranean and then stored on land for the remaining 10 months. When on the hard she was always covered with a full custom cover.
She was sailed back across the Atlantic to the Caribbean in 2023
In 2024 she was sailed from Trinidad to Puerto Rico and in 2025 she was sailed to Florida.
In 2026 she was sailed to Hampton, VA
She is the hull #71 done at the Morse factory in Costa Mesa, CA. Special hardware needed to finish the boat was supplied by Sam Morse company.
Main portholes are unique custom cast oval portholes, with patterns loaned to me by Larry Pardey.
She is presently in the water at Belle Isle Marina, Hampton , VA
New Main and Jib in 2021 still look like new storm sail (never used) A Drifter, and a used spare jib for wing on wing with bolt rope installed
A new Spray Dodger was installed in 2022
The interior upholstery was replaced in 2024
A new 3 Burner Range was installed in 2024.
New Danfoss Refrigerator compressor unit 2026
She is full of spares of almost anything you can imagine.
The bottom is usually repainted about every 3 years. There has never been any signs of fiberglass blisters, before launching 2 coats of epoxy paint were applied.
Zincs have been replaced annually.
All the canvas is in new condition (new custom spray dodger and cockpit cover with side curtains in 2023, the varnish (just the hatches) was just done, engine serviced, just a well-maintained and loved serious blue water cruiser.
She also has the unique Larry Pardey designed self-steering system that works off a trim tab on the rudder.
https://youtu.be/IP9ppE7F8WQ
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 6/7/26 | Initial price | $69,900 |
1990 Bristol Channel Cutter BCC 28 Video Tours
Overview from around the web 1990 Bristol Channel Cutter BCC 28
Customers praise the 1990 Bristol Channel Cutter BCC 28 for its exceptional craftsmanship and seaworthiness
Many users highlight its classic design and traditional aesthetics, which combine to create a vessel that not only looks beautiful but also handles well in various conditions. Owners frequently mention the cutter's stability and comfort, making long voyages more enjoyable. The spacious and well-thought-out interior is appreciated for its functionality, allowing for ample storage and a cozy living space during extended trips. Feedback also often underscores the BCC 28’s ability to sail effectively in both light and heavy winds, showcasing its versatility as a cruising yacht. The strong build and quality materials are frequently cited as reasons for its durability, giving owners confidence whether they are coastal cruising or embarking on ocean passages. Overall, the Bristol Channel Cutter BCC 28 is well-regarded among sailing enthusiasts for its blend of elegance, performance, and reliability.
The Biggest Pros and Cons
Bristol Channel Cutter BCC 28 (1990) – Pros and Cons
Pros
Classic Design: The BCC 28 features a traditional, timeless design that not only looks elegant but also performs well in various sailing conditions. Its full keel and shallow draft make it suitable for coastal cruising.
Stability and Performance: Known for its seaworthiness, the BCC 28 is built to handle rough seas with stability. Its heavy displacement and low center of gravity contribute to a smooth sailing experience.
Quality Construction: Built with solid craftsmanship, the 1990 BCC 28 typically showcases high-quality materials and attention to detail, ensuring durability and longevity.
Ample Living Space: Despite its compact size, the interior layout offers efficient use of space, providing a comfortable living area with essential amenities for weekend getaways or extended voyages.
Versatile Sailing Capabilities: This cutter rig provides excellent maneuverability and flexibility, allowing for adjustments in various wind conditions. It’s particularly well-suited for short-handed sailing.
Nostalgic Appeal: The BCC 28 appeals to sailing enthusiasts who appreciate classic designs and the nostalgia of traditional sailing vessels.
Cons
Size Limitations: As a 28-foot boat, accommodations may feel tight for larger crews. The space can be more limiting compared to larger cruisers, especially on longer voyages.
Performance in Light Winds: While the BCC excels in heavier winds, it may struggle in very light air due to its displacement and hull design, potentially requiring an engine for mobility.
Maintenance: Older boats often require more upkeep. Depending on its care history, a 1990 model might need attention to systems and aesthetics that can be labor-intensive.
Cost of Moorage and Upkeep: Due to its design and build quality, owners might face higher mooring and maintenance costs compared to more modern, production boats.
Limited Storage: Although well laid out, storage options may not be as extensive, which can be a challenge for extended cruising or those who prefer to bring more gear.
Outdated Systems: Depending on upgrades by previous owners, the on-board systems (electrical, plumbing, etc.) may be outdated and could require modernization for improved efficiency and safety.
Made For
The 1990 Bristol Channel Cutter BCC 28 is designed for sailing enthusiasts who appreciate the classic lines and robust construction of traditional yacht designs. Ideal for both experienced sailors and those seeking an adventurous entry into sailing, this vessel embodies a perfect balance of performance and comfort. It is particularly well-suited for individuals or couples looking for a capable offshore cruiser, as well as those wanting a reliable boat for coastal exploration and weekend getaways. The BCC 28 offers stability in rough waters, making it a favorable choice for navigating the often unpredictable conditions of the Bristol Channel. With its spacious cabin layout and well-thought-out features, this boat provides a welcoming environment for weekend trips, family excursions, or solo voyages. Whether you’re planning to enjoy days on the water or extended cruising, the Bristol Channel Cutter BCC 28 is an ideal vessel for those who cherish the spirit of adventure in their sailing experiences.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Virginia, United States Similar to the 1990 Bristol Channel Cutter BCC 28
Compare with similar boats and find the perfect one for you.
 1990 Bristol Channel Cutter BCC 28 | |||||
|---|---|---|---|---|---|
| $69,900 | $66,500 | $79,000 | $55,900 | $87,500 | $49,900 |
| Hampton | Fort Monroe | Deltaville | Deltaville | Deltaville | Deltaville |
| 28' | 38' | 39' | 40' | 41' | 33' |
| 11' | - | - | - | - | - |
| Yanmar | Yanmar | Yanmar | Westerbeke | Perkins Marine | Westerbeke |
| 30 hp | 30 hp | - | 40 hp | 50 hp | 27 hp |
| 31 | 76 | 394 | 328 | 85 | 84 |
Meet the Broker
Address
Boat Location
Contact Bay Harbor Brokerage, Inc. about 1990 Bristol Channel Cutter BCC 28
1553 Bayville St, Norfolk, VA, 23503
Login with Google