2005 Beneteau Oceanis Clipper 423 Boat in Oyster Bay, NY 11771 US
Built in 2005
Oceanis Clipper 423
1 Engine (Volvo)
42 feet
--
Fiberglass/Reinforced
When you step aboard Sing To Me a smile will immediately appear, it is immediately obvious this Beneteau 423 has been meticulously maintained since day one by caring knowledgeable owners. This beautiful example of the Beneteau 423 comes with all the options including custom features and continuous upgrades in rigging, electronics and creature comforts whether you are a coastal cruiser or long range cruiser it fits the bill. All maintenance and upgrades are documented and listed here, the list is impressive. Look no further and schedule an appointment to see this 2005 Beneteau 423 it should not be a missed opportunity to buy the finest example on the market today.
The Beneteau Oceanis 423 is a popular 42-foot cruising sailboat designed by Groupe Finot and built by Beneteau from 2002 to 2008.
Key Specifications
- Length Overall (LOA): ~43.14 ft (13.15 m)
- Beam: 12.93 ft (3.94 m)
- Draft: 5.5 ft (standard) or 6.9 ft (deep option)
- Displacement: 19,500 lbs (8,845 kg)
- Fuel Capacity: 53 gallons (200 L)
- Water Capacity: 154 gallons (581 L)
Design and Performance
- Hull Shape: Features a fin with bulb keel, spade rudder, and a wide transom for stability and form.
- Handling: Built for short-handed or single-handed sailing with lines led aft to the cockpit.
- Rigging: Masthead sloop configuration with a reliable deck layout.
Interior and Layout
- Accommodations: Offered in multi-cabin configurations (typically 2-cabin owner version or 3-cabin layout) accommodating groups comfortably.
- Galley: Well-equipped for cruising with a separate top-loading freezer and front-loading refrigerator.
- Living Space: Bright cherry or wood-finished interior with a large dinette, ample headroom, and generous tankage for liveaboard cruising.
I : 49.54 ft
J : 16.54 ft
P : 43.44 ft
E : 14.83 ft
Working Sail Area : 910.09 sq ft
- PERFORMANCE PACK (optional) - ? Extended mast (+70cm) with track and cars. ? Fully battened performance mainsail. ? Foam-luffed jib with anti-UV strip. ? Low stretch halyards. ? H53.2STC genoa sheet winches in place of the H46.2STC winches. ? 3-blade folding propeller. - NAV PACK (optional): Nav Pack n°4 - ? At cockpit level: Raymarine ST60 log/speedo/depth sounder, Raymarine ST60 windvane anemometer, Raymarine ST6001 automatic pilot + LS40. ? On steering console: Raymarine multifunction 8.4? colour screen, ? GPS/chart plotter. - PACK EXCLUSIVE (optional) - ? Nav Pack n°4. ? Sprayhood with stainless steel frames in ?Captain blue? or bimini. ? H40.2STC winch to starboard in place of H32.2STC winch. ? H40.2STCEH electric winch to port in place of H32.2STC winch. ? Hot and cold cockpit shower. ? Waterproof cockpit speakers. ? Teak cockpit floor.
? Teak slatted pivoting helm seat for easy access to scoop transom (Bénéteau patent). ? The cockpit is fitted with five lockers: - 2 side lockers with teak slatted lids. - 2 aft lockers with teak slatted lids. - 1 separate gas locker. ? All cockpit bench seats are teak slatted. ? The leather-trimmed steering wheel is pivoting for easier movement around the cockpit. ? Control lever. ? Steering compass. ? Console for navigation instruments. ? Handrail. ? Cup holder. ? 12 Volt socket. ? Oddments locker with stainless steel protection on the front of the console. ? Varnished wood cockpit table with fold-down leaves. The table support is stainless steel and incorporates a foot rest. ? The engine control panel is built in to the port coaming with a PMMA protective cover. ? Manual bilge pump. ? Overhead lamp. ? Cold water shower. ? Two speakers.
2,3 and 4 cabin versions are available.
Electrical panel: ? 16-switch 12V electrical panel plus 4 x 220V breakers, back-lit by blue indicator lights. ? Cigarette lighter socket. ? Double protection to electrical panel, differential and bi-polar thermal circuit breakers for 220V and 12V thermal circuit breakers. Supply: The 12V electrical circuit is supplied by ? Two 140 Amp service batteries. ? One 110 Amp engine battery. Resource management indicators: ? Voltmeter. ? Ammeter. ? Electric fuel tank gauge on engine control panel. ? Electric water gauges. Battery charging: ? By 220V shore supply with 20 Amp battery charger. ? Alternator coupled to engine. ? By 220V sockets in cabins. Lights: ? Approved navigation lights. ? Bow and stern navigation lights. ? Steaming light (masthead light). ? Anchor light.
? Headroom: 2 m. ? A functional space: - Work surface over icebox and around sink. - Gimballed stainless steel two-burner hob and oven, with safety rail. - 175L GRP ice box with refrigerating unit and front opening. - Seawater foot pump and icebox drainage. - Waste bin under sink. - Cutlery drawer. - Shelving. - Stainless steel bottle rack. - Stowage under hob with hinged doors - Stainless steel sink unit with double rectangular sinks. - Mixer tap with hot and cold pressurised water. - 10 place settings. ? Two Lewmar opening ports (583mm x 123mm) with curtains. ? Opening hatch (272mm x 417mm). ? Two halogen deckhead lights. ? One neon light.
? Engine compartment with foam sound-proofing. ? Engine control panel with rev counter and alarms to starboard cockpit coaming. ? Stainless steel propeller shaft with GRP protection moulded into the hull. ? Fixed three- blade propeller. ? Engine mounting built into the inner mould. ? Rotomoulded 200L diesel tank, fitted with electronic gauge. ? Saltwater and diesel filters with separators.
The hull is single-skinned GRP construction. Reinforced points (keel, rudder, chain plates, hull-deck joint) help to strengthen the structure. A structural inner moulding is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (shroud chainplate tie rods, keel, rudder, etc.), and spreads any loads guaranteeing reduced strain on the hull. The surface of the inner moulding makes cleaning easier and provides a better finish. The standard hull colour is white with blue and gold decoration; Steel Blue is available as an option.
The deck is sandwich construction (glass fibre and balsa) for an optimal strength/weight ratio and excellent thermal and sound insulation. A ?diamond point? non-slip surface increases safety over all areas of movement on deck. - MOORING AND ANCHORING - ? Welded stainless steel bow fitting with two rollers. The starboard roller is offset for permanent anchor stowage. ? 6 aluminium 400mm mooring cleats with stainless steel protection to teak rail. ? Self-draining chain locker with clinch fitting. (= anchor securing point). ? Protective hatch cover. ? Main anchoring kit with 16 kg anchor, 25m chain and 38m warp (4 mooring lines and 6 white fenders). ? 800W horizontal electric windlass with breaker and waterproof 1200W relay housing. - BATHING PLATFORM AND TRANSOM - ? Transom with teak covered bathing platform. ? Bathing ladder with teak covered treads. ? Stowage locker in scoop. ? Protective rubber rubbing strake to transom. ? Outboard motor bracket. ? Cockpit shower.
CE certification : A
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 8/29/26 | Initial price | $149,000 |
2005 Beneteau Oceanis Clipper 423 Video Tours
Overview from around the web 2005 Beneteau Oceanis Clipper 423
The 2005 Beneteau Oceanis Clipper 423 has garnered praise from sailing enthusiasts for its exceptional design and performance
Many customers appreciate its spacious interior, which features well-appointed cabins and a comfortable salon, making it ideal for both short trips and extended voyages. The galley is often highlighted for its practicality and efficiency, allowing for enjoyable meal preparation while at sea. Sail handling is another point of admiration, with customers noting that the boat's rigging and sail plan make it easy to manage, even in varying wind conditions. The stability and smooth sailing of the Oceanis Clipper 423 are frequently mentioned as standout features, providing confidence when navigating larger bodies of water. Additionally, the build quality and craftsmanship are frequently praised, with many owner testimonials emphasizing the durability of the materials and overall design. Owners also appreciate the versatility of the layout, which accommodates both relaxation and functionality, making it perfect for family outings or gatherings with friends. Overall, feedback from owners highlights the 2005 Beneteau Oceanis Clipper 423 as a well-rounded vessel that combines comfort, performance, and style, making it a popular choice among cruising enthusiasts.
Made For
The 2005 Beneteau Oceanis Clipper 423 is the perfect choice for sailing enthusiasts who seek a blend of comfort and performance on the water. Ideal for both seasoned sailors and newcomers alike, this elegant cruiser offers a spacious layout and modern amenities, making it suitable for various sailing adventures. For families or groups looking to explore coastal waters or embark on extended trips, the Oceanis Clipper 423 provides ample room with three well-appointed cabins and a generous saloon. The thoughtful design maximizes space, ensuring everyone can relax in comfort while onboard. Serious sailors will appreciate the boat's responsive handling and robust build, designed to withstand a range of sea conditions. Whether you're planning to race, cruise, or simply enjoy leisurely days at sea, the Clipper 423 delivers a harmonious balance of speed and stability. Ultimately, the 2005 Beneteau Oceanis Clipper 423 caters to anyone passionate about sailing, offering safety, style, and confidence to navigate both serene waters and more challenging conditions.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in New York, United States Similar to the 2005 Beneteau Oceanis Clipper 423
Compare with similar boats and find the perfect one for you.
 2005 Beneteau Oceanis Clipper 423 | ||||||
|---|---|---|---|---|---|---|
| Price | $149,000 | $145,000 | $129,000 | $175,000 | $179,000 | $105,000 |
| Location | Oyster Bay | Willsboro | Stony Point | Buffalo | Willsboro | Ossining |
| Nominal Length | 42' | 35' | 40' | 38' | 43' | 42' |
| Beam | 13' | - | - | - | - | - |
| Engine Make | Volvo | Yanmar | Yanmar | Yanmar | Yanmar | Volvo Penta |
| Total Engine Power | 55 hp | - | 50 hp | 30 hp | 54 hp | 55 hp |
| Days on Market | 2 | 176 | 968 | 81 | 7 | 115 |
| Get in touch |
Other Beneteau boats for sale in New York, United States
Meet the Broker
Address
Boat Location
Contact Knot 10 Yacht Sales about 2005 Beneteau Oceanis Clipper 423
Leave 10% Brokerage Fee's In Your Wake....
Login with Google