2005 Beneteau Oceanis Clipper 423 Boat in Oyster Bay, NY 11771 US
Built in 2005
Oceanis Clipper 423
1 Engine (Volvo)
42 feet
--
Fiberglass/Reinforced
2005 Beneteau 423
When you step aboard this vessel, it is immediately apparent that this Beneteau 423 has been meticulously maintained by knowledgeable, caring owners. This beautiful example has been thoughtfully equipped with desirable options, custom features, and continuous upgrades to her rigging, electronics, and onboard comforts.
Equally well suited for coastal cruising or extended passages, she offers a thoughtful combination of performance, comfort, and capability. Maintenance and upgrades have been carefully documented, with an impressive list of improvements throughout her ownership.
This vessel is a 2-cabin, 2-head version with a classic mainsail, 5'7" intermediate draft, and bow thruster. She is an exceptional example of a 2005 Beneteau 423 and deserves serious consideration by anyone looking for a well-maintained, extensively upgraded cruising sailboat.
Specifications
Dimensions
- LOA: 43.17 ft
- LWL: 38.58 ft
- Beam: 12.92 ft
- Displacement: 19,797 lbs
- Bridge Clearance: 54.33 ft
- Ballast: 5,836 lbs
Engine
- Engine Power: 55 HP
Tankage
- Fuel: 53 gallons
- Water: 100 gallons
- Holding: 44 gallons
Accommodations
The interior wood is a classic cherry finish, offset by blue Luxor Leather upholstery (2016). The floors feature a wooden teak-and-holly finish and were re-varnished in 2016. The interior is bright and well ventilated thanks to hatches, large opening ports, and skylights in the salon.
The galley is to starboard as you descend the companionway and wraps around the corner in an L-shaped configuration, providing ample work surface and storage.
To port are the guest head and aft cabin. The head can be accessed from either the salon or aft cabin. Forward of the head is the navigation station with a two-person settee adjoining it.
The dinette is on the starboard side of the salon, with a curved settee that comfortably seats five and a bench seat amidships with storage beneath. The bench also serves as a convenient footrest for the port settee.
The master cabin is forward, with a double island-style berth and HMS custom mattress (2016). There is storage to port and starboard, as well as beneath the berth and a small bench seat to port. The forward head, with separate shower, is to starboard.
I : 49.54 ft
J : 16.54 ft
P : 43.44 ft
E : 14.83 ft
Working Sail Area : 910.09 sq ft
Sails & Rigging
- Rolly Tasker Tri-radial Battened Mainsail (2016)
- Rolly Tasker 135% (2016)
- Mainsail cover (2016)
- Dutchman flaking system (2016)
- Gale sail forestay attachment system
- Mast, boom & spreaders Awlgripped (2016)
- All new standing rigging (2018)
- All new running rigging (2016)
- New lifelines (2016)
- Genoa tracks with adjustable blocks
- Forespar carbon-fiber telescoping whisker pole
Dimensions
- LOA: 43.17 ft
- LWL: 38.58 ft
- Beam: 12.92 ft
- Displacement: 19,797 lbs
- Bridge Clearance: 54.33 ft
- Ballast: 5,836 lbs
Galley
- Force 10 3-burner propane stove with oven
- Sea Frost front-loading refrigerator (2015)
- Sea Frost top-loading freezer (2015)
- External digital controls for refrigerator and freezer
- Double stainless-steel sink
- New faucet (2016)
- Seagull Carbon water filter
- Emerson microwave oven
- Storage above and below counter level
- “Veggie” cabinet with mesh baskets
- Stainless-steel fiddles on front of spice rack
Electrical
- Northern Lights 5KW Generator
- 2 x Solbian 80W Flex Solar Panels
- Victron controllers
- CruiseAir 16,000 BTU reverse-cycle air conditioning
- Seaward 11-gallon water heater (2016)
- LED interior lights
- LED navigation lights
- 3 x 12V fans
- 2 x 30A shore power inlets aft
- 2 x 30A shore power inlets in anchor locker
- 2 x 25'/30A shore power cords
- 1 x 50'/30A shore power cord
- 50A to 2 x 30A splitter
- 1 x AGM GR32 start battery (2016)
- 2 x AGM D4 house batteries (2016)
- Cristec 60A Battery Charger (2017)
- Xantrex Pro XM 1800W Inverter
Electronics & Navigation
- B&G Autopilot with remote
- B&G Zeus 2 12" Chartplotter
- B&G 4G 24 NM Radar
- B&G VHF with AIS receiver
- B&G Tridata (wind, depth, speed)
- Sony Stereo with Bluetooth
- Sony speakers (interior)
- Poly Planar speakers (cockpit)
- Samsung TV & DVD
- SeaTV masthead antenna
- Rogue Wave WiFi antenna & WiFi booster
Deck & Cockpit
- Double stainless-steel anchor roller
- Rocna 20 kg anchor with new 2026 chain and rode
- Fortress FX-37 anchor with 25' chain & 150' rode (2016)
- Lewmar electric windlass
- Jabsco anchor washdown (2016)
- Handrails on coachroof
- 2 x Lewmar STC 54 primary winches on coaming
- 1 x Lewmar STC 40 secondary winch on coachroof
- 1 x Lewmar ST40 electric secondary winch on coachroof
- Glebe Creek custom companionway doors
- Glebe Creek custom companionway and hatch screens
- Cockpit table with wooden leaves & storage
- Leather-covered wheel on pedestal
- 3 lazarettes for storage
- Propane locker holds two 10 lb aluminum tanks
- Stainless-steel arch with KATO dinghy davit system & KATO outboard motor lift
- Edson outboard motor bracket on stern rail
- Radar mount on arch
- Magma propane BBQ on stern rail
- Walk-through transom (seat folds up)
- Swim platform with swim ladder
- Transom shower with hot and cold water
Canvas (2016)
- Dodger with aft and side grab bars
- Bimini
- Connector
- Sun screen (can be moved to sunny side of bimini)
- Cockpit cushions
- Helm cover
- Table cover
Mechanical & Plumbing
- Volvo 55 HP Engine with approx. 2,300 hours
- 3-blade feathering MaxProp (2016)
- Shaft Shark
- Northern Lights 5KW Generator
- Lewmar bow thruster
- Spectra Watermaker, 9 GPH, with automatic fresh-water flush (2015)
- All sanitation hoses replaced in 2016 with top-grade hose
- Forward head: Jabsco Quiet Flush electric toilet (fresh water)
- Aft head: Jabsco manual toilet
- Faucets replaced (2016)
Safety & Miscellaneous
- Full USCG safety gear
- Radar reflector
- Dock lines
- Fenders
- Life jackets
- Weems & Plath clock and barometer
- Wooden cabin sole, teak and holly, re-varnished (2016)
All dates approximate.
Subject to revision.
A/C and refrigeration winterization performed by Seawanhaka Boat Yard.
Winter haul-out, storage, and spring launch performed by Seawanhaka Boat Yard.
Routine Volvo engine and Northern Lights generator oil changes, filters, and impellers performed by owner.
2026
- New 100 Ft ACC 3/8" Hi Test Chain – 100 Ft three strand nylon
- Lewmar windlass bench tested; new contactor/controller installed; gypsy greased
- Mainsail and Genoa serviced by UK Sails NY; new mainsail batten pocket retainers installed
- Blue Technology fresh-water filter installed
- 2025–2026: New Isinglass installed on dodger
- New transom shower head installed
- Both bilge float switches serviced
- Both joker valves replaced
- Bimini frame reinforced with crossbars
- New 140 ft, 3/8" spare halyard with Tylaska snap shackle
2025
- Touch-up bottom paint – Pettit Blue
2024
- New house batteries
- New bottom paint
- New Standard Horizon VHF at Nav Desk
- Replaced impellers on Volvo engine and Northern Lights generator
- Northern Lights generator relay switch replaced
2023
- New house batteries
- Replaced depth sounder
- Standing rigging inspected by rigger for insurance survey
- Replaced fixed salon table legs with telescoping legs
- Selden swivel cam cleats installed on davits to assist with dinghy hoisting
- Lewmar folding helm wheel (original available)
2022
- New wiring directly to refrigeration
- New wiring to autopilot
- New bilge pump installed; old unit serviced and retained as a spare
- Float switches on both bilge pumps serviced and cleaned
- Spinlock clutch installed on mast for topping lift
- New cockpit manual bilge pump installed
2021
- Installed blocks and rigging to convert from Dutchman to Stack Pack
- New Stack Pack from UK Sails (old Dutchman main cover available)
- New Morse steering cables
- Reinforced dorade boxes and installed stainless-steel cowl vents
2020
- MaxProp shipped to PYI for service
- New cutlass bearing
- New belts installed on Volvo engine
- New winter cover
- New bottom paint – Pettit Trinidad
- Rub rail installed at Willis Marine, Huntington, NY
- New rubber U-trim installed on transom scoop
- Trim caps fabricated for junction of rubber U-trim and teak rail
- New Harken furling line leads and blocks
- New furling line
- New circuit board for Sea Frost refrigeration unit
2019
- AIS Transponder added to AIS Receiver
- Xantrex Pro XM 1800W Inverter
- AB RIB
- Spare fixed-blade prop
- All aluminum deck fills replaced with stainless-steel deck fills
2018
- New standing rigging
2017
- Cristec Battery Charger
2016
- Rolly Tasker Tri-radial Mainsail and Genoa
- Forespar carbon-fiber telescoping whisker pole
- New running rigging
- Mast, boom and spreaders painted with Awlgrip
- 20 kg Rocna anchor with new chain and rode
- Fortress FX-37 anchor with chain and rode
- Anchor washdown
- Lewmar electric winch on port cabin top
- All new canvas & cockpit cushions
- Stainless-steel arch (original) upgraded by KATO to include dinghy davits, outboard motor lift, and radar mount
- B&G Zeus 2 Chartplotter
- B&G Radar
- B&G Tridata (wind, depth, speed)
- B&G VHF with AIS receiver
- Samsung TV and DVD player
- Sony Stereo & new speakers
- WiFi booster
- Water heater
- Solar panels and regulators
- LED lighting – interior & navigation lights
- AGM batteries
- Shaft Shark
- 3-blade feathering MaxProp
- Custom mattress in forward cabin
- New upholstery in salon – Luxor Leather
- New heads, sanitation hoses & faucets
2015
- Northern Lights 5KW Generator
- Sea Frost refrigeration and freezer with exterior monitors
- Spectra Watermaker
2013
- Yamaha 6 HP purchased new
- All service and maintenance of Yamaha performed at Bridge Marine, Bayville, NY
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 8/29/26 | Initial price | $149,000 |
2005 Beneteau Oceanis Clipper 423 Video Tours
Overview from around the web 2005 Beneteau Oceanis Clipper 423
The 2005 Beneteau Oceanis Clipper 423 has garnered praise from sailing enthusiasts for its exceptional design and performance
Many customers appreciate its spacious interior, which features well-appointed cabins and a comfortable salon, making it ideal for both short trips and extended voyages. The galley is often highlighted for its practicality and efficiency, allowing for enjoyable meal preparation while at sea. Sail handling is another point of admiration, with customers noting that the boat's rigging and sail plan make it easy to manage, even in varying wind conditions. The stability and smooth sailing of the Oceanis Clipper 423 are frequently mentioned as standout features, providing confidence when navigating larger bodies of water. Additionally, the build quality and craftsmanship are frequently praised, with many owner testimonials emphasizing the durability of the materials and overall design. Owners also appreciate the versatility of the layout, which accommodates both relaxation and functionality, making it perfect for family outings or gatherings with friends. Overall, feedback from owners highlights the 2005 Beneteau Oceanis Clipper 423 as a well-rounded vessel that combines comfort, performance, and style, making it a popular choice among cruising enthusiasts.
Made For
The 2005 Beneteau Oceanis Clipper 423 is the perfect choice for sailing enthusiasts who seek a blend of comfort and performance on the water. Ideal for both seasoned sailors and newcomers alike, this elegant cruiser offers a spacious layout and modern amenities, making it suitable for various sailing adventures. For families or groups looking to explore coastal waters or embark on extended trips, the Oceanis Clipper 423 provides ample room with three well-appointed cabins and a generous saloon. The thoughtful design maximizes space, ensuring everyone can relax in comfort while onboard. Serious sailors will appreciate the boat's responsive handling and robust build, designed to withstand a range of sea conditions. Whether you're planning to race, cruise, or simply enjoy leisurely days at sea, the Clipper 423 delivers a harmonious balance of speed and stability. Ultimately, the 2005 Beneteau Oceanis Clipper 423 caters to anyone passionate about sailing, offering safety, style, and confidence to navigate both serene waters and more challenging conditions.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in New York, United States Similar to the 2005 Beneteau Oceanis Clipper 423
Compare with similar boats and find the perfect one for you.
 2005 Beneteau Oceanis Clipper 423 | ||||||
|---|---|---|---|---|---|---|
| Price | $149,000 | $145,000 | $129,000 | $175,000 | $179,000 | $105,000 |
| Location | Oyster Bay | Willsboro | Stony Point | Buffalo | Willsboro | Ossining |
| Nominal Length | 42' | 35' | 40' | 38' | 43' | 42' |
| Beam | 13' | - | - | - | - | - |
| Engine Make | Volvo | Yanmar | Yanmar | Yanmar | Yanmar | Volvo Penta |
| Total Engine Power | 55 hp | - | 50 hp | 30 hp | 54 hp | 55 hp |
| Days on Market | 6 | 180 | 972 | 85 | 11 | 119 |
| Get in touch |
Other Beneteau boats for sale in New York, United States
Meet the Broker
Address
Boat Location
Contact Knot 10 Yacht Sales about 2005 Beneteau Oceanis Clipper 423
Leave 10% Brokerage Fee's In Your Wake....
Login with Google