2019 Nitro Z19 Boat in Yantis, TX 75497 US
Built in 2019
Z19
1 Engine (Mercury)
19.3 feet
Gas
Fiberglass/Reinforced
At 19' 4" and with 200HP standard, the NITRO® Z19 is fast enough for the most demanding tournament angler and nimble enough to get into places where bigger, heavier boats can't. This is thanks in part to our exclusive NITRO® Vortex Technology™ (NVT™) hull, which improves holeshot, acceleration and overall performance. The Z-Core™ seating system with Force Flex suspension provides industry-leading comfort, and it's rigged with a Mercury® outboard, Minn Kota® trolling motor, Lowrance® fishfinder and a custom, factory-matched trailer with GALVASHIELD® Impact corrosion and chip protection.
*Minnkota Ultrex w/remote
Humminbird Helix 12 MSI
Humminbird Helix 9 MDI
Garmin 12" Graph
Garmin Livescope LVS 34
Humminbird MEGA 360
Dual 8' Power Pole Blades
Minnkota MK440PC
Fury 29P Stainless Steel Prop
204.4 hours on engine
- Length:19' 4"
- Length: 19' 4"
- Beam: 7' 10"
- Bottom width: 6' 2"
- Max. recommended HP: 200 HP
- Fuel capacity: 50 gal.
- Max. person capacity: 4 persons
- Max. person weight: 500 lbs.
- Max. person, motor & gear weight: 1375 lbs.
- Interior depth: 18.5"
- Transom height: 23"
- Deadrise: 16 degrees
- Draft: 15"
- Average dry weight: 1850 lbs.
- Average package weight: 3249 lbs.
- Package height: 5' 7"
- Package width: 8' 6"
- Towing length: 25' 0"
- Storage length: 22' 7"
Comfort, Convenience & Peace of Mind
- NMMA® certified
- Flotation meets or exceeds NMMA® & U.S. Coast Guard Requirements
- EPA-compliant fuel system
- Non-skid mats bow & stern
- 6 drink holders
- 4 stainless steel pull-up cleats
- Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
- 4 grab handles (1 at each seat)
- Built-in tournament ruler & holder
- Fire extinguisher
- Horn
- Paddle
Console
- NEW Lowrance® HOOK2 5 Combo flush-mounted fishfinder
- Hydraulic steering w/tilt
- Removable acrylic, tinted windscreen
- Ready to accept optional removable port console
- Custom-molded modular console w/2-tone gelcoat
- Veethree® multifunction instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
- Dash light dimmer
- Waterproof, capacitive touch digital keypad
- LED courtesy light
- 12V outlet
Construction & Exterior
- 100% composite deck core w/superior thermal stability & strength-to-weight ratio
- Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
- Gelcoated stringer/liner system
- Foam-filled hull for optimal buoyancy & safety
- Full-width fiberglass-encapsulated composite transom
- Low-profile gunnels to maximize deck size & for easier casting
Electrical
- Bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount 12" (30.5 cm) graph
- 1,000 GPH (3,785 LPH) bilge pump
- LED console courtesy light
- Manual LED-lighted bow gear storage
- Automotive-style labeled fuse panel w/cover
- Interstate® 31M-AGM cranking battery
- 2 heavy-duty Interstate® Series 29 trolling batteries
- 2-bank, 8-amp battery charger w/exterior receptacle
- 6-gauge trolling motor wiring w/50-amp circuit breaker
- Master power switch
- Waterproof Deutsch plugin gauge connectors
- Water/abrasion-resistant connectors
Interior
- 34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility w/lots of storage
- Bike seat w/pedestal
- Folding fishing seat w/composite frame
- Z-Core™ seating system w/Force Flex suspension & contoured, rotomolded frame for driver & passenger seats
- Trolling motor pedal recess for Minn Kota® & MotorGuide® trolling motors
- Port & starboard bow rod hold-down straps
- Molded-in drainage channels around bow storage compartments
- Oversized, lockable port & starboard bow rod lockers w/lift assists for rods up to 8' (2.44 m)
- Oversized lockable center bow storage locker
- Step to bow deck w/62-qt. (58.7 L) insulated cooler & removable trash receptacle
- Partner rod ramp w/rod handle organizer & hold-down strap
- Footrest w/non-skid mat under console(s)
- Designated net storage behind seating
- 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
- Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
- Lift-out tool/rope storage tray in rigging compartment
- Insulated aluminum lids w/welded corners
- 16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
- Lockable compression latches
Livewell Systems
- 2 aft 19-gal. (72 L) insulated Guardian™ livewells w/digital timers
- 750 GPH (2,840 LPH) livewell recirculation/pump-out system
- 500 GPH (1,893 LPH) aerator/fill pump
- Dual remote drain controls
- Rotomolded w/rounded corners
Performance
- NITRO® Vortex Technology™ (NVT™) hull for a smoother, drier ride
- Rapid Planing System™ (RPS™) for quicker holeshots & maximized speed
- 8" (20.3 cm) adjustable jack plate
- Rigging tube for organized wiring & abrasion resistance
- Stainless steel propeller
Trailer
- Custom-fit, single-axle NITRO® trailer w/powder-coat finish & GALVASHIELD® Impact corrosion & chip protection for improved durability
- 7-pin connector
- 15" (38.1 cm) chrome wheels w/radial tires
- Surge disc brakes
- Inside the frame brake line system w/1-point bleed
- No Touch Vortex hub lubrication system w/6-year, 100,000-mile limited warranty
- Spare tire carrier (spare tire avail. at additional cost)
- All-welded rectangular GALVASHIELD® frame
- Space-saving swing-away tongue to reduce storage length
- Heavy-duty winch w/nylon strap & bow safety strap
- Outboard motor support to reduce hull & transom stress while towing
- Carpeted bunks & fender boards to protect hull
- Submersible LED lights
- Safety cables
Trolling Motor
- Minn Kota® Maxxum® 24V, 70-lb. (31.8 kg) thrust, 42" (1.07 m) shaft, foot-control trolling motor
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 8/18/26 | Initial price | $35,000 |
2019 Nitro Z19 Video Tours
Nitro Z19: BoatTEST Review
Overview
The Nitro Z19 Z-Pro package is a 19-foot bass boat designed specifically for serious tournament anglers. Positioned to fill a gap in Nitro's lineup for a tournament-focused model in the 19-foot range, the Z19 Z-Pro offers a balance of size and performance. Measuring 19 feet 4 inches, it features ample casting platforms and a 16-degree deadrise at the transom, providing enough stability and handling capability to navigate choppy waters while remaining compact enough to fish in tight spaces near docks and structures.
Power and Performance
Our test boat was powered by a Mercury Optimax 200 Pro XS outboard engine with a 1.75-to-1 gear ratio, turning a Fury 14x25 three-blade stainless steel propeller. With two people aboard, a full fuel tank, and test gear, the boat weighed approximately 3,015 pounds. It achieved a top speed of 68.4 mph at 5,600 rpm. The most efficient cruising speed was recorded at 3,500 rpm, where the boat ran at 39.1 mph while consuming 7.4 gallons per hour, resulting in a fuel economy of 5.3 miles per gallon and a range of 239 statute miles with 10% fuel reserve. The Z19 Z-Pro utilizes Nitro's Vortex Technology (NVT) hull design, characterized by parabolic scalloped shapes that curve upward, enhancing turning ability and lift. Additionally, the Rapid Planning System incorporates a transom setback and a notch ahead of the motor to deliver cleaner water to the prop, improving propulsion efficiency. The hull design also minimizes water surging into the cockpit during deceleration, keeping the aft casting deck dry. Handling was confident and stable, with no chine walking or prop ventilation observed during wide arcs and tight turns.
Exterior Design and Deck Features
The Z19 Z-Pro's exterior is thoughtfully designed for tournament fishing. The aft casting deck measures 44 inches fore to aft and 80 inches across, providing 24 square feet of casting space. A dedicated socket allows for secure placement of a portable seat. The boat includes an 8-foot Power-Pole shallow water anchor mounted at the stern, and the Mercury Optimax 200 Pro XS is installed on an 8-inch jack plate. Forward on the aft deck, there are two insulated roto-molded 19-gallon Guardian Livewells with digital timers, oxygen generators, remote drain controls, and high-capacity recirculating and aerator pumps. The livewells are baffled and colored blue to reduce bait stress. Storage is ample, with locking hatches on each side containing removable tubs sized for seven Plano 3700 Series tackle boxes. A large center hatch provides access to the power pole pump, trolling batteries, cranking battery, and a three-bank 30-amp battery charger. Additional features include a two-stroke oil tank, a 1,000-gallon-per-hour bilge pump, and gel-coated stringers for durability.
Bow and Forward Deck
The bow casting deck offers 34 square feet of space with anti-fatigue padding beneath the marine carpet for comfort during extended fishing sessions. The bow is equipped with a Minn Kota Fortrex trolling motor delivering 80 pounds of thrust on a 45-inch shaft. Controls for the trolling motor, a second Lowrance HDS-7 structure scan fish finder, light and trim switches, a recessed foot pedal, and a cup holder are all conveniently located. Storage includes a port locker for rods up to eight feet long, a large lighted center compartment with customizable partitions, and a starboard locker with racks for the stern light, seat pedestals, and a paddle. Bungee cords on each side of the bow deck provide quick and secure rod storage.
Helm and Seating
The helm is equipped with multifunction V3 gauges and a Lowrance HDS-7 fish finder flush-mounted both at the bow and helm stations. The driver benefits from a hot foot throttle, tilt hydraulic steering wheel, and a pro-trim turn signal style trim switch that allows hands-on-wheel operation. Push-button accessory switches flank the wheel, with livewell recirculation controls on the starboard side. The shift control is ergonomically positioned, with livewell fill switches just ahead. A storage tray with a rubber mat and power pole controls are located near the shifter. Seating features automotive-style seats with wraparound backrests and angled cushions designed to hold occupants securely at high speeds. An optional second console can be bolted outboard to port, providing additional rod storage with a carpeted ramp for rod tips.
Additional Features and Trailer
Additional conveniences include a roto-molded 62-quart cooler with improved insulation and a tray to keep sandwiches separate from ice, a trash receptacle, and multiple cup and tool holders. The boat comes standard with a tandem axle trailer featuring GalvaShield coating and Surge disc brakes, enhancing durability and safety during transport.
Conclusion
The Nitro Z19 Z-Pro package is a well-rounded tournament bass boat that combines thoughtful design, advanced hull technology, and comprehensive features to meet the demands of serious anglers. Its performance on the water is confident and efficient, with excellent handling and fuel economy. The ample storage, livewell system, and ergonomic controls contribute to a tournament-ready experience right out of the box.
Overview from around the web 2019 Nitro Z19
The 2019 Nitro Z19 has garnered positive feedback from customers, highlighting its impressive performance and features
Many boaters appreciate its stability and maneuverability, noting that it handles well in various water conditions. The spacious layout and ample storage options receive high marks, making it a favorite for both day trips and extended fishing outings. Customers often praise the powerful motor options available with the Z19, providing a smooth and exhilarating ride. The fishing-friendly design, including dedicated rod storage and livewells, is also frequently mentioned, showcasing the boat's practicality for avid anglers. Additionally, the build quality and attention to detail in the construction of the Nitro Z19 stand out to users, ensuring that the boat is built to last. Overall, the combination of performance, comfort, and functionality has made the 2019 Nitro Z19 a popular choice among boating enthusiasts.
The Biggest Pros and Cons
2019 Nitro Z19 Overview The 2019 Nitro Z19 is designed for anglers who demand performance, versatility, and comfort on the water. This boat features cutting-edge technology and a thoughtfully laid-out design, making it a popular choice for both serious and recreational fishermen. Here’s a look at the pros and cons of the Nitro Z19.
Pros
Performance: The Nitro Z19 is powered by a robust engine and features a well-designed hull that provides excellent speed and stability, allowing for quick runs to prime fishing spots.
Fishability: Equipped with ample storage for gear, tackle boxes, and fishing equipment, this boat offers dedicated compartments for rods and other accessories, optimizing the fishing experience.
Comfortable Seating: The boat features comfortable seating arrangements, including a multi-position captain's chair, enabling long days on the water without discomfort.
Advanced Electronics: With options for state-of-the-art fish finders and navigation systems, the Z19 ensures that anglers have the tools they need for successful fishing trips.
Durability: Built with high-quality materials, the Nitro Z19 shows strength and resilience against the elements, ensuring longevity and dependable use.
Customization: The boat offers various customization options, allowing users to choose features that best suit their specific fishing needs and style.
Cons
Price Point: While offering many high-end features, the Nitro Z19 does come at a higher price point compared to entry-level boats, which might be a consideration for budget-conscious buyers.
Maintenance: Like many performance boats, the Z19 may require regular maintenance and care, which can be time-consuming and add to ownership costs.
Size and Maneuverability: The boat’s size can make it less maneuverable in tight spaces, which might pose challenges for navigating shallow areas or crowded docks.
Fuel Consumption: The powerful engine that ensures performance also means that fuel consumption can be higher compared to smaller, less powerful models.
Limited Social Space: While designed primarily for fishing, the layout may restrict social space if entertaining passengers, which might deter those looking for a boat suited to both fishing and leisure.
Made For
The 2019 Nitro Z19 is designed for passionate anglers and boating enthusiasts who demand performance and versatility on the water. This model is perfect for serious bass fishermen looking for a reliable, feature-rich boat that excels in both speed and stability. With its spacious layout, advanced storage options, and state-of-the-art fishing features, the Z19 caters to those who value functionality without sacrificing comfort. Whether you're a seasoned pro competing in tournaments or a weekend warrior looking to enjoy some relaxing days on the lake, the Nitro Z19 offers a perfect balance of power and agility. Its responsive handling and impressive horsepower make it suitable for various water conditions, while the ergonomic design ensures that you and your crew can fish all day in comfort. In summary, the 2019 Nitro Z19 is tailored for serious anglers and recreational boaters who want a high-quality, performance-driven vessel that enhances their experience on the water.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Texas, United States Similar to the 2019 Nitro Z19
Compare with similar boats and find the perfect one for you.
No image available 2019 Nitro Z19 | ||||||
|---|---|---|---|---|---|---|
| Price | $35,000 | $34,995 | $34,995 | $34,995 | $34,995 | $38,160 |
| Location | Yantis | Beaumont | Conroe | Corpus Christi | Mcallen | Tyler |
| Nominal Length | 19' | 18' | 18' | 18' | 18' | 17' |
| Engine Make | Mercury | - | - | - | - | MERCURY MARINE |
| Total Engine Power | 200 hp | 150 hp | 150 hp | 150 hp | 150 hp | 115 hp |
| Days on Market | 29 | 27 | 27 | 27 | 27 | 8 |
| Get in touch |
Other Nitro Z19 boats for sale in Texas, United States
Other Nitro boats for sale in Texas, United States
Meet the Broker
Address
Boat Location
Contact Sartin Marine, Inc about 2019 Nitro Z19
290 Farm Road 1567 West, Lake Fork, TX, 75497
Login with Google