2026 Viking 70 Convertible

• MAN V12X 2,200HP
• MTU 12V2000 M96Z 2,222HP

• 12V DC stereo
• Back-up engine controls supplied by engine manufacturer
• Bridge installed without exposed fasteners
• Center console walk-around helm with electronic storage in raised pod with additional storage below
• Compass, lighted Ritchie, large and flush mounted on centerline
• Electronic trolling valve controls *MAN and MTU utilize ZF Auto troll; CAT utilizes “CAT Advanced Trolling System”
• Extended overhang for extra room to move behind helm and companion seats with anodized aluminum aft railing
• Fiberglass helm pod with single lever electronic controls and stainless-steel steering wheel
• Fire system control with automatic and manual discharge and override system located at console
• Freshwater outlet forward locker
• Gauges/electronic displays, include hour meter reading for main engines supplied by manufacturer
• Handrails, powder-coated aluminum effectively positioned above ladder to bridge and at helm
• Helm and companion seats, 3 seats, wood, ladder back with 4” stainless pedestals and removable cushions and covers
• Helm panel, black acrylic for flush-mounted electronics installation
• Instrumentation based on standard engine package, lighted with switches in radio box
• Lounge seating forward of the helm console with vinyl covered foam cushion with freezer storage beneath and air conditioning vents in backrest
• Manual engine shutdown switches in radio box
• Multifunction depth finder/ sea temperature gauge
• Nonskid deck for traction and durability
• Port and starboard cabinet at aft end of lounge seating
• Recessed radio boxes with split lids, port and starboard sides of console with switch panel inside painted satin black
• Refrigerated top loading chill box forward cabinet
• Removable flybridge bench seat backrest forward facing at aft ends of port and starboard bench seats
• Sink with spray head at forward end of flybridge
• Speakers, flush mounted to aft ends of bridge
• Switch for trumpet style air horns (2), mounted on forward flat section of radar pod
• Touch screen control monitor with audible and visible alarms: engine room temperature, high bilge water, high exhaust temperature, generator and tank monitors as well as confirming correct system operation
• Trim tab control switch mounted at console
• Under helm access with lights and storage room
• VHF radio with antenna and mounts — ICOM
• Windshield, centerline venturi cutout to maximize visibility

• Air conditioning with reverse cycle heat that circulates from concealed registers behind valances to maximize comfort while minimizing noise and drafts — individual temperature control
• Blinds for desired natural lighting and additional privacy
• Cabinetry, walnut with drawers and bottle storage, finished wood interior
• Cocktail table, walnut, high gloss finish, hi/low
• Dayhead, aft starboard corner
• Flooring, custom at salon entrance and wall-to-wall carpet with lined padding for sound absorption
• Headliner, Majilite, natural color, 1/8” foam and tricot backing
• Home theater center with HDTV, on a raise and lower mechanism with cable hook-up *Optional enclosed bridge model, TV located above dinette
• Ice maker, clear ice type with matching wood cabinet door Lambrequins, wood to match interior finish
• Lights, overhead LED, strip style
• Lounge, L-shaped with lift cushions for storage
• Main electrical panel with AC selector breakers and touch screen control monitor with audible and visible alarms: engine room temperature, high bilge water, high exhaust temperature, generator and tank monitors as well as confirming correct system operation
• Pillows, decorative throws for sofa
• Sliding electric salon door, molded fiberglass door with window and walnut interior finish, with key lock
• Valances custom finished wood, fluted
• Windows, fixed, sides laminated safety glass, aft bulkhead, tempered
• Wood strips between headliner panels

• Aft salon starboard side just inside salon cockpit entrance
• Air conditioning/heat with register in soffit
• Countertop, engineered stone
• Exhaust fan with vent in soffit
• Flooring, custom
• Lower vanity with curved walnut face
• Lighting, overhead LED lights recessed in soffit and ceiling
• Headhunter head system
• Window blind

• Blinds
• Custom galley island, 360 degree access with refrigeration and freezers, engineered stone countertop and three swivel type bar stools with backs and overhang for bar stool area Dinette table, walnut, high gloss finish thru-bolted
• Electric range, 4-burner cook top, surface mounted
• Exhaust fan, high velocity
• Flooring, custom
• Garbage disposal in sink
• Lighting, LED backsplash
• Lights, overhead LED, strip style
• Microwave/convection oven located in upper galley cabinet
• Pantry, starboard side forward of companionway stairs
• Raised dinette couch with removable cushions and pull-out storage underneath for rods, 110V and USBC outlets
• Refrigerators and freezer, Sub-Zero, large capacity, deep-drawer under-counter style with varnished wood faces, (2) refrigerator units and (1) freezer unit
• Sink, double-bowl stainless steel, undermounted in countertop with brushed nickel galley faucet
• Storage cabinets and drawers in lower galley, satin walnut doors and faces with stowage for utensils and other items; finished wood interior
• Storage cabinets in upper galley, satin walnut doors with finished wood interior Trash compactor in lower galley with walnut face
• Water tank level gauge in pantry

• Awlgrip bilge areas with access hatches, Snow White and lighted for easier maintenance and cleaning
• Flooring, carpeted steps from galley through companionway
• Laundry center with stackable, front-loading washer and dryer behind walnut door
• Lighting, overhead LED lights recessed in headliner
• Staircase, curved
• Walnut strips in companionway
• Wall panels, natural color Majilite headliner individually installed with Velcro backing for easy maintenance

• Air conditioning with reverse cycle heat that circulates from concealed registers behind the valances to maximize comfort while minimizing noise and drafts - individual temperature control
• Bed, queen-size, walkaround with upgraded, pillow top, Handcraft Viking Slumber #8 innerspring, with (2) pillow shams and throw pillows
• Bedspread — quilted, designer style with pillow shams (2) and throw pillows
• Closet, port, wood-lined hanging closet with walnut doors
• Credenza with storage
• Drawer storage under bed
• End tables each side of bed
• Flooring, carpet
• Hanging locker, starboard
• Headboard, upholstered
• Headliner, Majilite, natural color, 1/8” foam and tricot backing
• Lighting, decorative LED indirect rope from underneath bed platform
• Lighting, overhead LED lights recessed in headliner with dimmer switches
• Reading lights, overhead with separate switches
• Sheets (1 set)
• Telephone outlet
• TV, HD flat screen with upgraded audio system

• Air conditioning with reverse cycle heat that circulates from concealed registers behind the valances to maximize comfort while minimizing noise and drafts - individual temperature control
• Bed, queen-size walkaround with Handcraft Viking Slumber #6 innerspring mattress and lift up top with gas pistons and wood-lined storage underneath
• Bed, upper/lower bunks with Handcraft Viking Slumber #6 innerspring mattress and lift up bottom for storage in both staterooms
• Bedspread — quilted, designer style with pillow shams (2)
• Flooring, carpet
• Hanging locker, walnut, wood-lined with bar for hanging clothes
• Hatches, one (1) Bomar, foredeck hatch with Ocean Air screen shade system
• Headliner, Majilite headliner, natural color, 1/8” foam and tricot backing
• Lighting, decorative LED indirect rope from underneath bed platform
• Lighting, overhead LED lights recessed in headliner with dimmer switches
• Reading lights with separate switches
• Sheets, (1 set)
• Speaker recessed in headliner
• Storage cabinets, port and starboard sides of bed, walnut
• Storage drawers under bed, (2) large drawers
• TV, flat screen

• Air conditioning/heat with register
• Countertop, engineered stone
• Exhaust fan with vent in soffit
• Flooring, custom
• Head system, Headhunter
• Lighting, overhead LED lights recessed in soffit and in ceiling
• Linen storage with shelves and mirrored door in master head
• Lower vanity with curved walnut face
• Master and forward stateroom heads, one-piece custom frameless shower doors
• Medicine cabinet with mirrored doors
• Mirror around upper vanity inserts
• Receptacle, 110V - GFCI
• Shower light
• Stall shower, fiberglass with brushed nickel shower fixtures and with drain to automatic sump pump in bilge
• Storage cabinet with shelves and mirrored door in master head
• Towel bar and ring — brushed nickel

• Aluminum backing plate, laminated in cockpit sole, for fighting chair or table
• Boarding box, fiberglass with nonslip, lift up top and storage
• Dockside electric connection — (2) 50 amp/220V with Glendinning Cable masters in forward port and starboard cabinets under gunwales
• Dockside water connection with pressure reducing valve in side lockers
• Engine room access with door and ladder to engine room
• Extended flybridge overhang for shade
• Gaskets for all lids and access doors
• Grabrails at cockpit haunch
• Ladder to flybridge, one-piece, anodized aluminum with nonskid treads
• Latches for all in deck box lids to prevent water intrusion into deck boxes
• Lazarette hatch with access to steering system, trim tabs, drain pumps
• Lighting, indirect rope, tri color (red, white, and blue) underneath the coaming
• Lighting, recessed tri color (red, white, and blue) in flybridge overhang
• Live well in transom box without light or window
• Molded nonskid deck
• Observation mezzanine with port aft facing lounge seating with vinyl covered cushions, hinged seats, tackle cabinet with pullout drawers and bait freezer
• Recessed insulated in deck fish boxes,
• Refrigerated drink box undermounted in salon step for direct access from cockpit
• Rod holders, (4) flush mounted
• Rounded bottom-edge cockpit coaming for comfort
• Self-bailing cockpit with large scuppers
• Side lockers under coaming with gaff storage
• Speakers tied into flybridge
• Split lids for fishboxes
• Stainless steel gas springs on all hatches and lids
• Straps with padding to secure transom door and gate while open
• Transom mounted swim steps at transom door
• Valve to fill freshwater tank from dockside inlet
• Walk-through transom door with lift gate
• Y-valve fresh and saltwater wash down connection, port and starboard forward lockers

• Ablative/Copolymer antifouling bottom paint (2 coats), using “Interlux Interprotected epoxy primer system”
• Awlgrip brass thru-hulls and sea strainers in engine room
• Awlgrip engine room, lazarette, forward bilge and anchor locker for enhanced visibility and easier maintenance
• Blister resistant modified vinylester resin in entire hull skin
• Custom blended polyester resin used in structural laminates, topsides, bridges, and hardtops
• DuPont high gloss polyurethane boot stripe
• Fiberglass side thru-hull
• High performance isophthalic npg gelcoat for superior gloss, flexibility and outstanding weathering characteristics
• Hull interior isophthalic gelcoat top-coated with a durable high gloss polyurethane coating
• Hull – resin infused cored composite construction, using end-grain balsa and closed cell foam cores in selected areas for optimized strength and stiffness while minimizing weight
• Infused composite bulkheads — Main engine room bulkhead, and forward bulkhead
• Infused fiberglass fuel, freshwater and holding tanks, with fiberglass baffles inside and balsa coring on sides for stiffness, sealed to hull with resin foam
• Molded fiberglass salon floor/engine room ceiling with foam core for acoustical and thermal insulation
• Propeller pockets to reduce draft
• Satin, walnut interior finish throughout
• Stringers, fiberglass encapsulated foam

• Air conditioning — direct expansion, zoned with reverse cycle heat for complete climate control throughout the interior and with individual temperature controls for staterooms and salon
• Bilge pumps with clean out pumps in keel area linked into monitoring system and connected to float switches for automatic and manual operation
• Centralized seawater system with Electrosea SeaStrong Silver Bullet pumps
• Murray Ventilation Products engine room ventilation system with thermostatically controlled supply and discharge fans for proper fresh air circulation and water intrusion suppression
• Murray Ventilation Products pneumatically controlled engine room ventilation dampers, integrated into fire suppression system
• Dual stage variable speed 110V AC freshwater system with on deck freshwater fill and cockpit dockside supply inlet with pressure reducing valve
• Engine room entrance and remote mounted engine start and stop switches for easier accessibility
• Fire suppression system, automatically and manually operated and tied into main engine and generator ignition and ventilation systems with override
• Freshwater filter — paper
• Freshwater supply in engine room for general maintenance and cleaning
• Fuel filters, Parker FBO series for main engines
• Fuel priming pumps for main engines, electric
• Fuel transfer and management system, 24V DC pump controlled through touch-screen control panels
• Hour meters on generators
• Integrated engine mounting system for efficient transfer of energy to drive train system
• Internal sea strainers for generator, centralized seawater system and live well pump
• Mufflers - engines, in-line type with surge tubes in engine room
• Mufflers — generators, gas/ water separators
• Oil changing system, gear type pump for main engines, transmissions and generator with pump out line run to cockpit locker
• PEX plumbing, freshwater system with manifold system to isolate individual areas
• Prep for future installation of Seakeeper
• Propellers, Veem, interceptor class “S” pitch tolerance (ISO 484/2) and dynamic balancing. Advanced design cambered blade sections for optimum performance. Interceptor strips to adjust engine load. Nibral alloy for maximum durability.
• Racor dual fuel/water separator filters for generator. Clear bowl type, top-loading for convenient replacing
• Recessed external sea strainers for main engine pick ups
• Rudders, stainless, composite rudder bearing with dripless seal laminated into hull
• Seacocks, Tru-Design composite, ball-type sea valves for all thru-hulls below the water line
• Seacocks, bronze engine pickups and generator gas water separator.
• Shafts — 2 Aquamet high strength stainless steel, double-taper with machined keyway and custom thrust plate at main engine couplings
• Steering system, Optimus electric power steering Struts — thru-water, Nibral, composite bearings
• Tides Marine water lubricated dripless shaft seals with crossover water supply from both engines
• Trim tabs, custom with center, port and starboard tabs recessed in transom, individual controls for each tab with fiberglass covers
• Water heater — quick recovery, electric

• 24V DC ship’s service throughout
• 240/110V AC power supply
• 110V outlet in engine room
• Anchor light/navigation lights
• Batteries, (3) independent 24V banks, mounted in fiberglass storage boxes, maintenance free for engine start, ships service and electronics
•  Battery chargers, (3) with thermal cutoff and switching system for complete integration
• Battery distribution panels with battery cutoff for ship service batteries and engine batteries
• Battery parallel system for main engines and generator start • Bonded electrical system with ground plate
• Color-coded, labeled and numbered wiring system with corresponding drawings
• Dimmers, DC LED interior lighting throughout excluding companionway
• Engine room lights, DC with LED/AC backup with switch at engine room entrance
• Generator, Diesel — (1) 29 kW Onan QD (electronic quiet diesel) Series, user-friendly with electronic governing allowing voltage and electronic frequency control (R)
• Glendinning cable master (2) 50/220V AC with 3 wire grounded cord
• Instrument panel lights for flybridge and main electric panel
• Lights, overhead LED, strip style
• Magnetic switches for bilge lights
• Master electrical control provided via power distribution system utilizing a redundant Can Bus control for AC/DC remote breaker electrical systems. Complete system control and monitoring provided by 2 integrated touch screen controls-(1) located at salon main panel and (1) at the flybridge helm
• Receptacles, 110V duplex with GFCI throughout Voltage stabilizer combiner transformers for more consistent, clean voltage

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.