2023 Sea Pro 208 Bay Boat in Denison, TX 75020 US
Built in 2023
208 Bay
1 Engine (Suzuki)
20.7 feet
--
Fiberglass/Reinforced
One of the original owners of SEA PRO Jimmy Hancock, along with former Tidewater Boats founder Preston Wrenn are excited to bring about the resurrection of a legend in the mid-tier center console salt water fishing boat market. The line is built with South Carolina pride in a 200,000 sq ft facility in Whitmire, SC.
- Simrad touchscreen electronics
- Sea Star power assist tilt hydraulic steering (150 HP and bigger)
- Sea Pro Connect by Boat Fix
- Audison Audio
- Dual battery switch w/ACR
- Raw water washdown
- Half swim platform w/3 step telescoping ladder
- Lockable rod storage
- Trolling motor plug w/harness
- Compass
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 7/9/26 | Initial price | $48,000 |
Sea Pro 208 Bay: BoatTEST Review
Overview
The Seapro 208 Bay DLX is a versatile bay, flats, and coastal fishing boat introduced as part of seven new models by the revived Seapro brand. Designed primarily for anglers, it offers a blend of performance, durability, and thoughtful features. The model tested was powered by an Evinrude E-Tec G2 150HO outboard engine, with options available up to 200 horsepower. The boat measures 20 feet 8 inches in length and has a draft of 12 inches, allowing it to access shallow waters while maintaining capability for coastal excursions.
Power and Performance
The 208 Bay DLX is equipped with a single Evinrude E-Tec G2 150HO outboard, featuring a 2.17:1 gear reduction and a 15-inch by 18-inch RX4 4-blade stainless steel propeller. During testing, with two people aboard, a full fuel tank, and gear, the boat weighed approximately 3,577 pounds. It achieved a top speed of 42.5 miles per hour at 5,450 RPM and demonstrated an efficient cruise at 3,000 RPM, maintaining 20 miles per hour while consuming 3.9 gallons per hour. This translates to a fuel economy of 5.13 miles per gallon and a cruising range of 282 miles with a 10% fuel reserve from its 61-gallon capacity. The semi-V hull with 16 degrees of dead rise at the transom contributed to a dry and responsive ride, handling tight and sweeping turns with ease. The integrated hydraulic steering system of the E-Tec G2 150HO enhances maneuverability, with adjustable power assist and an i-Trim automatic trim feature that can be disabled for manual control.
Exterior Design and Deck Layout
Constructed with 100% hand-laid composite materials, the 208 Bay DLX comes with a comprehensive warranty package, including a 10-year transferable hull warranty, lifetime hardware warranty, and a 5-year bow-to-stern warranty. The outboard well features an advanced sea chest through-hull system that consolidates water intake from the cockpit, livewell, baitwell, and drains into a single, double-clamped through-hull with a ball valve shut-off, enhancing safety by reducing multiple hull penetrations. The aft cockpit depth measures 19 inches, with a raised fishing platform spanning 97 inches across and 45 inches deep, finished with non-skid surfaces and recessed hardware to provide a smooth casting area. Securely locking jump seats are positioned aft on each side, while aerated LED-lit baitwells occupy the corners, complemented by a centrally located livewell. The baitwell and livewell hatches are constructed of solid fiberglass to withstand foot traffic and maintain cooler water temperatures. Beneath the leaning post, which includes a padded backrest and a 37-inch wide bottom cushion, are the engine and house batteries, water pump, and strainer, all accessible via an in-deck hatch. The bilge area is gel-coated for ease of cleaning.
Helm and Controls
The helm console is equipped with a stainless steel rail encircling an acrylic windscreen, standing 55 inches above the deck. The test configuration included a compass positioned above the Evinrude icon touchscreen and accessory switches, with space reserved for an optional Garmin Fishfinder chart plotter to starboard. Digital shift and throttle controls are mounted outboard. Storage is well-considered, featuring a glove box, an open compartment, and a raised footrest covered with a soft mat matching the deck. Rod holders and speakers are installed on both sides of the console and forward along the gunnels. The fuel fill is conveniently located on the port side deck, facilitating refueling when trailering the boat.
Bow and Storage
At the bow, a seat with removable backrest and bottom cushions is positioned on the front of the console, providing access to helm rigging beneath the hatch. Under the seat cushion, a 32-quart insulated cooler is integrated. The bow casting platform is unobstructed, featuring pull-up cleats and optional cushions for added comfort. Storage includes lockable rod lockers with LED lighting on each side and a large 150-quart insulated forward center compartment that serves as a fish box or ice chest. Additionally, the aft center compartment is pre-rigged for an optional trolling motor battery, demonstrating thoughtful design for fishing versatility.
Conclusion
The Seapro 208 Bay DLX presents a well-rounded package for anglers seeking a capable and efficient bay boat. Its combination of a durable hand-laid composite hull, efficient Evinrude E-Tec G2 power, and practical fishing features such as spacious livewells, secure seating, and ample storage make it a compelling choice. The boat’s handling characteristics and fuel economy further enhance its appeal for both shallow water fishing and extended coastal trips. Overall, the 208 Bay DLX delivers a balance of performance, comfort, and thoughtful design tailored to the needs of serious anglers.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Texas, United States Similar to the 2023 Sea Pro 208 Bay
Compare with similar boats and find the perfect one for you.
 2023 Sea Pro 208 Bay | |||||
|---|---|---|---|---|---|
| $48,000 | $49,000 | $56,960 | $56,960 | $56,960 | $56,960 |
| Denison | Rockport | Aransas Pass | Conroe | Corpus Christi | Beaumont |
| 21' | 21' | 21' | 21' | 21' | 21' |
| Suzuki | - | - | - | - | - |
| 200 hp | 150 hp | 150 hp | 150 hp | 150 hp | 150 hp |
| 1 | 20 | 323 | 264 | 269 | 271 |
Other Sea Pro boats for sale in Texas, United States
Meet the Broker
Address
Boat Location
Contact Eisenhower Yacht Club about 2023 Sea Pro 208 Bay
2141 Park Road 20, Denison, TX, 75020
Login with Google