2025 Nitro Z19 Pro Sold Boat in Leeds, AL 35094 US
Z19 Pro
1 Engine (MERCURY MARINE)
19.3 feet
Gas
Fiberglass/Reinforced
Boats For Sale in Alabama, United States Similar to the 2025 Nitro Z19 Pro
Compare with similar boats and find the perfect one for you.
2025 Nitro Z19 Pro | ||||||
|---|---|---|---|---|---|---|
| Price | $61,199 | $61,180 | $61,290 | $61,945 | $60,235 | $59,235 |
| Location | Leeds | Leeds | Sylacauga | Prattville | Sylacauga | Florence |
| Nominal Length | 19' | 19' | 21' | 21' | 21' | 21' |
| Engine Make | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE |
| Total Engine Power | 200 hp | 200 hp | 200 hp | 200 hp | 200 hp | 200 hp |
| Days on Market | 520 | 7 | 15 | 4 | 14 | 17 |
| Get in touch |
Other Nitro boats for sale in Alabama, United States
There isn't a more fishable, well-equipped, or better value in the 19-foot class than the Z19 Pro. It's bristling with strength thanks to its 200HP rating and NITRO® NVT™ hull that pops onto plane instantly and delivers on-rails handling throughout the entire RPM band. The PRO designation means this rig is ready to hit the tournament trail from the factory.
With upgraded Garmin fishfinders tied to the Minn Kota Ultrex trolling motor, you've got top-tier tech already on board. A monster front deck gives plenty of room for multiple anglers and carries bountiful storages underfoot, each adorned with lockable twist-to-close latches. The console is an angler's dream with factory-rigged electronics, a complete gauge set, and a sport steering wheel tied to smooth, responsive steering. With so many features and advantages, the Z19 Pro punches far above its weight class with performance, style, and value.
-
Length:19' 4"
-
Beam: 7' 10"
-
Bottom Width: 6' 2"
-
Max. Recommended HP: 200 HP
-
Fuel Capacity: 50 gal.
-
Max. Person Capacity: 4 persons
-
Max. Person Weight: 500 lbs.
-
Max. Person, Motor & Gear Weight: 1375 lbs.
-
Interior Depth: 18.5"
-
Transom Height: 23"
-
Deadrise: 16 degrees
-
Draft: 15"
-
Average Dry Weight: 1850 lbs.
-
Average Package Weight: 3500 lbs.
-
Package Height: 5' 7"
-
Package Width: 8' 6"
-
Towing Length: 25' 0"
-
Storage Length: 23' 11"
-
Storage Length (w/Outboard Trimmed Down): 23' 0"
PRO
-
NEW bow Garmin® ECHOMAP™ UHD2 9” (22.86 cm) sv gimbal-mounted fishfinder w/LiveScope™ Plus System
-
NEW console Garmin® ECHOMAP™ UHD2 9” (22.86 cm) sv flush-mounted fishfinder
-
NEW Minn Kota® Ultrex™ 24V, 80-lb. (36.29 kg) thrust, 45” (1.14 m) shaft trolling motor w/Dual Spectrum CHIRP™
-
NMEA network for fishfinders & trolling motor to sync equipment
-
Livewell culling system
-
Factory-applied keel protector
-
Rod organizer in bow port rod locker
-
Hot Foot® throttle
-
Pro-Trim lever
-
Upgraded to custom-fit, tandem-axle steel NITRO® trailer w/brake, bow step & performance 14" (35.56 cm) aluminum wheels & spare tire
Comfort, Convenience & Peace of Mind
-
NMMA® certified
-
Flotation meets or exceeds NMMA® & U.S. Coast Guard requirements
-
EPA-compliant fuel system
-
NEW Black non-skid bow & stern mats
-
Low-profile gunnels to maximize deck size & for easier casting
-
Stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
-
5 stainless steel pull-up cleats, including cleat at driver seat
-
4 grab handles (1 at each seat)
-
Fire extinguisher
-
Horn
-
Paddle
Livewell System
-
NEW 41-gal. (155.2 L) insulated, rotomolded GUARDIAN™ livewell w/digital timer & rounded corners
-
500 GPH (1,892.71 LPH) aerator/fill pump
-
750 GPH (2,839.06 LPH) livewell recirculation/pump-out system
-
Livewell control valve
-
Dual remote drain controls
-
Starboard livewell lid w/culling bracket
Trolling Motor
-
Trolling motor pedal recess
Console
-
NEW console decals
-
Modular, aerodynamic console design w/expanded leg clearance & large fishfinder surface
-
Removable acrylic, tinted plexiglass windscreen
-
5" (12.7 cm) digital touchscreen control
-
NEW Contura® V rocker switches
-
Veethree® multifunction instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
-
Dash light dimmer
-
Tilt hydraulic steering
-
Below-console RAM® X-Grip® phone holder & 12V outlet
-
LED courtesy light
-
Ready to accept optional removable port console
Interior
-
34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility
-
Bike seat w/pedestal
-
Folding fishing seat w/composite frame
-
NEW Z-CORE™ seating system w/Force Flex suspension & contoured, rotomolded frame for driver & passenger seats
-
Low driver & passenger flat seat mounting
-
Bow tool/drink holder
-
Bow port & starboard rod hold-down straps
-
Molded-in drainage channels around bow storage compartments
-
Oversized, lockable bow port & starboard rod lockers w/lift assists for rods up to 8' (2.44 m)
-
Rod organizer in bow port rod locker
-
Oversized lockable bow center storage locker
-
Step to bow deck w/62-qt. (58.67 L) insulated cooler & removable trash receptacle
-
Partner rod ramp w/rod handle organizer & hold-down strap
-
Footrest w/non-skid mat under console(s)
-
Integrated step to aft deck w/lockable storage & removable tub
-
Designated net storage behind seating
-
Built-in tournament ruler & holder
-
2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
-
Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
-
Lift-out tool/rope storage tray in rigging compartment
-
Insulated aluminum lids w/welded corners
-
16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
-
Lockable latches
Exterior
-
NITRO VORTEX TECHNOLOGY™ (NVT™) hull for a smoother, drier ride
-
RAPID PLANING SYSTEM™ (RPS™) for quicker holeshots & maximized speed
-
10” (25.4 cm) R&R Design Slidemaster adjustable jack plate—Black
-
Rigging tube for organized wiring & abrasion resistance
-
Stainless steel propeller
Construction & Exterior
-
NEW hull & deck stripe color configuration
-
100% composite deck core w/superior thermal stability & strength-to-weight ratio
-
Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
-
Gelcoated stringer/liner system
-
Foam-filled hull for optimal buoyancy & safety
-
Full-width fiberglass-encapsulated composite transom
-
Splashwell protective film
-
NEW Black hardware
Electrical
-
Angled bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount 10" (25.4 cm) fishfinder
-
LED console courtesy light
-
Manual LED-lighted bow gear storage
-
Automotive-style labeled fuse panel w/cover
-
Interstate® cranking battery
-
2 heavy-duty Interstate® trolling batteries
-
3-bank, 30-amp onboard battery charger w/exterior receptacle
-
6-gauge trolling motor wiring w/50-amp circuit breaker
-
Master power switch
-
Waterproof Deutsch connectors on gauges
-
Water- & abrasion-resistant connectors
Trailer
-
7-pin connector
-
Surge disc brakes on both axles
-
Hub system w/1-year limited warranty
-
All-welded rectangular GALVASHIELD® frame
-
Space-saving swing-away tongue to reduce storage length
-
Fold-away tongue jack
-
Heavy-duty winch w/nylon strap & bow safety strap
-
Outboard motor support to reduce hull & transom stress while towing
-
Carpeted bunks & fender boards to protect hull
-
Submersible LED lights
-
Retractable transom tie downs
-
Safety cables
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
Price History
| Date | Event | Price |
|---|---|---|
| 8/3/25 | Price decreased | $61,199(-2.3%) |
| 6/28/25 | Initial price | $62,660 |
2025 Nitro Z19 Pro Video Tours
Overview from around the web 2025 Nitro Z19 Pro
The 2025 Nitro Z19 Pro has been receiving rave reviews from customers who appreciate its exceptional performance and innovative features
Many users highlight its powerful output, noting the impressive acceleration and handling that make it a joy to drive on both calm and choppy waters. Customers also love the spacious layout and thoughtfully designed storage compartments, which provide ample space for all gear, making organization and accessibility a breeze during fishing trips or recreational outings. The comfortable seating and ergonomic helm design receive high praise for ensuring that every journey is enjoyable and fatigue-free. The cutting-edge technology integrated into the Nitro Z19 Pro, such as advanced fish-finding systems and user-friendly controls, has impressed many anglers. Users report an enhanced fishing experience, thanks to these tools that help them locate and target fish more effectively. Additionally, the overall build quality and durability of the Nitro Z19 Pro are frequently mentioned, with many customers feeling confident in their investment due to its sturdy construction and dependable performance. This model truly stands out as a favorite for serious anglers and boating enthusiasts alike, making it a top choice for those seeking adventure on the water. In sum, the 2025 Nitro Z19 Pro is earning high marks for its blend of performance, comfort, and innovative features, making it a must-see for anyone in the market for a new boat.
Made For
The 2025 Nitro Z19 Pro is designed for the passionate angler who values performance, versatility, and cutting-edge features. Whether you’re a seasoned pro or a dedicated weekend warrior, this boat caters to those who demand high-quality construction and superior handling on the water. Ideal for competitive fishing enthusiasts, the Z19 Pro boasts ample storage, advanced fishing amenities, and a spacious deck layout, making it perfect for both serious tournaments and leisurely outings. Its powerful engine options and responsive maneuverability ensure you can navigate to your favorite spots with ease, while the sleek design and premium finishes reflect your commitment to style and functionality. With built-in features like state-of-the-art fish finders, updated livewells, and comfortable seating, the Nitro Z19 Pro is crafted for those who seek not just a boat, but a complete fishing experience. If you’re looking for a watercraft that facilitates both exhilaration and practicality, the Nitro Z19 Pro is your ultimate fishing partner.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker

Address
Want to update the details or images for this boat? Claim this listing by getting in touch.
Boat Location
Contact Bass Pro Boating Center | Leeds, AL about 2025 Nitro Z19 Pro
5000 Bass Pro Blvd., Leeds, AL, 35094











































































































































