2024 Nitro Z19
$47,499
Boat in Fort Worth, TX 76177 US
Built in 2024
Z19
1 Engine (MERCURY MARINE)
19.3 feet
Gas
Fiberglass/Reinforced
The NITRO Z19 is the perfect blend of performance, capability and tournament-ready features. A proven hull carries up to 200 horses to get you up to speed in a hurry while the massive casting deck has ample space for you and a buddy. Inside, the massive rod storage and center box storages carry a world of gear. Underneath, the standard trailer is custom-matched to the Z19 for years of smooth on-road performance and confident loading and unloading. For a rig that outclasses the competition and punches above its weight, the Z19 answers the call.
At the fishing hole, the Z19 offers everything from a step to the aft deck with storage, an angled bow panel, livewell lid culling bracket and much, much more!
Length:19' 4"
Beam: 7' 10"
Bottom Width: 6' 2"
Max. Recommended HP: 200 HP
Fuel Capacity: 50 gal.
Max. Person Capacity: 4 persons
Max. Person Weight: 500 lbs.
Max. Person, Motor & Gear Weight: 1375 lbs.
Interior Depth: 18.5"
Transom Height: 23"
Deadrise: 16 degrees
Draft: 15"
Average Dry Weight: 1850 lbs.
Average Package Weight: 3500 lbs.
Package Height: 5' 7"
Package Width: 8' 6"
Towing Length: 25' 0"
Storage Length: 23' 11"
Storage Length (w/Outboard Trimmed Down): 23' 0"
Comfort, Convenience & Peace of Mind
- NMMA® certified
- Flotation meets or exceeds NMMA® & U.S. Coast Guard requirements
- EPA-compliant fuel system
- Non-skid bow & stern mats
- Low-profile gunnels to maximize deck size & for easier casting
- Stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
- 5 stainless steel pull-up cleats, including cleat at driver seat
- 4 grab handles (1 at each seat)
- Fire extinguisher
- Horn
- Paddle
Livewell System
- 2 aft 19-gal. (71.92 L) insulated, rotomolded GUARDIAN™ livewells w/digital timers & rounded corners
- 500 GPH (1,892.71 LPH) aerator/fill pump
- 750 GPH (2,839.06 LPH) livewell recirculation/pump-out system
- Dual remote drain controls
- Starboard livewell lid w/culling bracket
Trolling Motor
- Minn Kota® Maxxum® 24V, 70-lb. (31.75 kg) thrust, 42" (1.07 m) shaft, foot-control trolling motor w/mount
- Trolling motor pedal recess
Console
- Modular, aerodynamic console design w/expanded leg clearance & large fishfinder surface
- Removable acrylic, tinted windscreen
- Lowrance® HOOK Reveal 5C flush-mounted fishfinder
- 5" (12.7 cm) digital touchscreen control
- Veethree® multifunction instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
- Dash light dimmer
- Tilt hydraulic steering
- Below-console RAM® X-Grip® phone holder & 12V outlet
- LED courtesy light
- Ready to accept optional removable port console
Interior
- 34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility
- Bike seat w/pedestal
- Folding fishing seat w/composite frame
- Z-CORE™ seating system w/Force Flex suspension & contoured, rotomolded frame for driver & passenger seats
- Low driver & passenger flat seat mounting
- Bow tool/drink holder
- Bow port & starboard rod hold-down straps
- Molded-in drainage channels around bow storage compartments
- Oversized, lockable bow port & starboard rod lockers w/lift assists for rods up to 8' (2.44 m)
- Oversized lockable bow center storage locker
- Step to bow deck w/62-qt. (58.67 L) insulated cooler, removable trash receptacle & snap-in sandwich tray
- Partner rod ramp w/rod handle organizer & hold-down strap
- Footrest w/non-skid mat under console(s)
- Integrated step to aft deck w/lockable storage & removable tub
- Designated net storage behind seating
- Built-in tournament ruler & holder
- 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
- Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
- Lift-out tool/rope storage tray in rigging compartment
- Insulated aluminum lids w/welded corners
- 16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
- Lockable latches
Performance
- NITRO VORTEX TECHNOLOGY™ (NVT™) hull for a smoother, drier ride
- RAPID PLANING SYSTEM™ (RPS™) for quicker holeshots & maximized speed
- 10” (25.4 cm) R&R Design Slidemaster adjustable jack plate—Black
- Rigging tube for organized wiring & abrasion resistance
- Stainless steel propeller
Construction & Exterior
- 100% composite deck core w/superior thermal stability & strength-to-weight ratio
- Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
- Gelcoated stringer/liner system
- Foam-filled hull for optimal buoyancy & safety
- Full-width fiberglass-encapsulated composite transom
- Splashwell protective film
Electrical
- Angled bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount 10" (25.4 cm) fishfinder
- LED console courtesy light
- Manual LED-lighted bow gear storage
- Automotive-style labeled fuse panel w/cover
- Interstate® cranking battery
- 2 heavy-duty Interstate® trolling batteries
- NOCO® GB40 jump starter pack
- 3-bank, 30-amp onboard battery charger w/exterior receptacle
- 6-gauge trolling motor wiring w/50-amp circuit breaker
- Master power switch
- Waterproof Deutsch connectors on gauges
- Water- & abrasion-resistant connectors
Trailer
- Custom-fit, single-axle NITRO® trailer powdercoated w/GALVASHIELD® Impact corrosion & chip protection for improved durability
- 7-pin connector
- 15" (38.1 cm) chrome wheels w/radial tires
- Surge disc brakes
- Hub system w/1-year limited warranty
- All-welded rectangular GALVASHIELD® frame
- Space-saving swing-away tongue to reduce storage length
- Fold-away tongue jack
- Heavy-duty winch w/nylon strap & bow safety strap
- Outboard motor support to reduce hull & transom stress while towing
- Carpeted bunks & fender boards to protect hull
- Submersible LED lights
- Retractable transom tie downs
- Safety cables
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
Price History
| Date | Event | Price |
|---|---|---|
| 4/1/26 | Price decreased | $47,499(-0.2%) |
| 2/5/26 | Price decreased | $47,599(-1.2%) |
| 10/15/25 | Price decreased | $48,199(-0.4%) |
| 8/16/25 | Price decreased | $48,399(-0.8%) |
| 7/14/25 | Price decreased | $48,799(-2.2%) |
| 6/28/25 | Initial price | $49,899 |
2024 Nitro Z19 Video Tours
Boattest.com Review
Overview
The Nitro Z19 Z-Pro package is a 19-foot bass boat designed specifically for serious tournament anglers. Positioned to fill a gap in Nitro's lineup for a tournament-focused model in the 19-foot range, the Z19 Z-Pro offers a balance of size and performance. Measuring 19 feet 4 inches, it features ample casting platforms and a 16-degree deadrise at the transom, providing enough stability and handling capability to navigate choppy waters while remaining compact enough to fish in tight spaces near docks and structures.
Power and Performance
Our test boat was powered by a Mercury Optimax 200 Pro XS outboard engine with a 1.75-to-1 gear ratio, turning a Fury 14x25 three-blade stainless steel propeller. With two people aboard, a full fuel tank, and test gear, the boat weighed approximately 3,015 pounds. It achieved a top speed of 68.4 mph at 5,600 rpm. The most efficient cruising speed was recorded at 3,500 rpm, where the boat ran at 39.1 mph while consuming 7.4 gallons per hour, resulting in a fuel economy of 5.3 miles per gallon and a range of 239 statute miles with 10% fuel reserve. The Z19 Z-Pro utilizes Nitro's Vortex Technology (NVT) hull design, characterized by parabolic scalloped shapes that curve upward, enhancing turning ability and lift. Additionally, the Rapid Planning System incorporates a transom setback and a notch ahead of the motor to deliver cleaner water to the prop, improving propulsion efficiency. The hull design also minimizes water surging into the cockpit during deceleration, keeping the aft casting deck dry. Handling was confident and stable, with no chine walking or prop ventilation observed during wide arcs and tight turns.
Exterior Design and Deck Features
The Z19 Z-Pro's exterior is thoughtfully designed for tournament fishing. The aft casting deck measures 44 inches fore to aft and 80 inches across, providing 24 square feet of casting space. A dedicated socket allows for secure placement of a portable seat. The boat includes an 8-foot Power-Pole shallow water anchor mounted at the stern, and the Mercury Optimax 200 Pro XS is installed on an 8-inch jack plate. Forward on the aft deck, there are two insulated roto-molded 19-gallon Guardian Livewells with digital timers, oxygen generators, remote drain controls, and high-capacity recirculating and aerator pumps. The livewells are baffled and colored blue to reduce bait stress. Storage is ample, with locking hatches on each side containing removable tubs sized for seven Plano 3700 Series tackle boxes. A large center hatch provides access to the power pole pump, trolling batteries, cranking battery, and a three-bank 30-amp battery charger. Additional features include a two-stroke oil tank, a 1,000-gallon-per-hour bilge pump, and gel-coated stringers for durability.
Bow and Forward Deck
The bow casting deck offers 34 square feet of space with anti-fatigue padding beneath the marine carpet for comfort during extended fishing sessions. The bow is equipped with a Minn Kota Fortrex trolling motor delivering 80 pounds of thrust on a 45-inch shaft. Controls for the trolling motor, a second Lowrance HDS-7 structure scan fish finder, light and trim switches, a recessed foot pedal, and a cup holder are all conveniently located. Storage includes a port locker for rods up to eight feet long, a large lighted center compartment with customizable partitions, and a starboard locker with racks for the stern light, seat pedestals, and a paddle. Bungee cords on each side of the bow deck provide quick and secure rod storage.
Helm and Seating
The helm is equipped with multifunction V3 gauges and a Lowrance HDS-7 fish finder flush-mounted both at the bow and helm stations. The driver benefits from a hot foot throttle, tilt hydraulic steering wheel, and a pro-trim turn signal style trim switch that allows hands-on-wheel operation. Push-button accessory switches flank the wheel, with livewell recirculation controls on the starboard side. The shift control is ergonomically positioned, with livewell fill switches just ahead. A storage tray with a rubber mat and power pole controls are located near the shifter. Seating features automotive-style seats with wraparound backrests and angled cushions designed to hold occupants securely at high speeds. An optional second console can be bolted outboard to port, providing additional rod storage with a carpeted ramp for rod tips.
Additional Features and Trailer
Additional conveniences include a roto-molded 62-quart cooler with improved insulation and a tray to keep sandwiches separate from ice, a trash receptacle, and multiple cup and tool holders. The boat comes standard with a tandem axle trailer featuring GalvaShield coating and Surge disc brakes, enhancing durability and safety during transport.
Conclusion
The Nitro Z19 Z-Pro package is a well-rounded tournament bass boat that combines thoughtful design, advanced hull technology, and comprehensive features to meet the demands of serious anglers. Its performance on the water is confident and efficient, with excellent handling and fuel economy. The ample storage, livewell system, and ergonomic controls contribute to a tournament-ready experience right out of the box.
Overview from around the web 2024 Nitro Z19
Customers are raving about the 2024 Nitro Z19 for its exceptional performance and sleek design
Many highlight its powerful Mercury engine, which delivers impressive speed and smooth handling on the water. Anglers appreciate the spacious deck layout, ample storage compartments, and advanced fish-finding technology that make every fishing trip more productive and enjoyable. The comfortable seating and high-quality materials also receive praise, ensuring a pleasant experience whether you're out for a full day of fishing or a leisurely cruise. Overall, the 2024 Nitro Z19 is celebrated for combining cutting-edge features with reliability and style, making it a top choice among bass fishing enthusiasts.
The Biggest Pros and Cons
The 2024 Nitro Z19 offers a compelling blend of performance, comfort, and advanced features, making it a standout choice for bass fishing enthusiasts. Here are some pros and cons to consider:
Pros
Powerful Performance: Equipped with a high-performance Mercury Pro XS engine option, the Z19 delivers excellent speed and acceleration, ideal for quick runs to fishing spots.
Spacious Deck: The Z19 features a large, carpeted casting deck with ample storage compartments, giving anglers plenty of room to move and organize gear.
Advanced Electronics: Comes pre-wired for a range of fish finders and includes upgraded console options, enhancing navigation and fish locating capabilities.
Comfortable Seating: Ergonomically designed seats with adjustable options provide comfort during long days on the water.
Durable Construction: Built with a strong fiberglass hull and quality components, the Z19 offers reliability and longevity.
Versatile Storage: Multiple storage areas including rod lockers, tackle storage, and dry storage keep equipment secure and accessible.
Cons
Price Point: The 2024 Nitro Z19 is positioned in the higher price range, which may be a consideration for budget-conscious buyers.
Fuel Efficiency: With powerful engine options, fuel consumption can be higher compared to smaller or less powerful boats.
Limited Seating Capacity: While comfortable for anglers, the seating is primarily designed for fishing and may not accommodate larger groups comfortably.
Size for Transport: At nearly 19 feet, it requires a suitable vehicle and trailer for transport, which might be a factor for some owners.
Made For
The 2024 Nitro Z19 is designed for fishing enthusiasts who demand high performance, versatility, and comfort on the water. Whether you’re a seasoned angler targeting bass or a weekend warrior looking for a reliable and stylish fishing boat, the Z19 offers advanced features and ample space to enhance your fishing experience. Its powerful engine options, spacious casting decks, and smart storage solutions make it ideal for those who want to fish hard and enjoy every moment out on the lake.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Texas, United States Similar to the 2024 Nitro Z19
Compare with similar boats and find the perfect one for you.
 2024 Nitro Z19 | |||||
|---|---|---|---|---|---|
| $47,499 | $47,995 | $47,995 | $47,995 | $52,440 | $52,599 |
| Fort Worth | Mcallen | Corpus Christi | Beaumont | New Braunfels | Grapevine |
| 19' | 19' | 19' | 19' | 19' | 19' |
| MERCURY MARINE | - | - | - | MERCURY MARINE | MERCURY MARINE |
| 200 hp | 225 hp | 225 hp | 225 hp | 200 hp | 200 hp |
| 720 | 215 | 219 | 221 | 69 | 439 |
Other 2024 Nitro Z19 For Sale in Texas, United States
Other Nitro Z19 boats for sale in Texas, United States
Other Nitro boats for sale in Texas, United States
Meet the Broker
Address
Boat Location
Contact Cabela's Boating Center | Fort Worth, TX about 2024 Nitro Z19
12901 Cabela Drive, Fort Worth, TX, 76177
Login with Google