2026 Nitro Z18
$43,520
Boat in East Peoria, IL 61611 US
Built in 2026
Z18
1 Engine (MERCURY MARINE)
18.7 feet
Gas
Fiberglass/Reinforced
The NITRO® Z18 is more than America's favorite bass boat, it's also the official boat of Major League Fishing®. Boasting the perfect blend of exhilarating performance, pro-level fishability, and superior quality, the Z18 is ideal for both weekend warriors and serious anglers.
A 175HP rating delivers searing performance at speed, while the NITRO® NVT™ hull keeps things steady and smooth. On the trolling motor, the Z18 is a stealthy predator in the shallows with edge-to-edge stability that excels in chop and rollers.
Inside, the Z18 is angler-designed and proven at the highest levels. Storages are huge, dry, lockable, and convenient, while comfort comes by way of bolstered Z-CORE™ seating covered in premium marine-grade vinyl. A fully insulated step cooler keeps drinks cold all day, while the timed, aerated, and recirculating live wells keep your catch frisky from dawn to weigh in.
Standard Lowrance® electronics and Minn Kota® trolling motor get you in the game, while the custom-matched GALVASHIELD IMPACT™ trailer gets you there safely, year after year. The NITRO® Z18 delivers unsurpassed performance, value, and fishability in a package that's ready to fish at any level of competition.
Length:18' 8"
Beam: 7' 10"
Bottom Width: 6' 3"
Max. Recommended HP: 175 HP
Fuel Capacity: 40 gal.
Max. Person Capacity: 4 persons
Max. Person Weight: 550 lbs.
Max. Person, Motor & Gear Weight: 1350 lbs.
Interior Depth: 18.5"
Transom Height: 22.5"
Deadrise: 16 degrees
Draft: 15"
Average Dry Weight: 1700 lbs.
Average Package Weight: 3200 lbs.
Package Height: 6' 4"
Package Width: 8' 6"
Towing Length: 24' 1"
Storage Length: 21' 3"
Comfort, Convenience & Peace of Mind
NMMA® certified
Flotation meets or exceeds NMMA® & U.S. Coast Guard requirements
EPA-compliant fuel system
Black non-skid bow & stern mats
Low-profile gunnels to maximize deck size & for easier casting
Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
4 stainless steel pull-up cleats
4 grab handles (1 at each seat)
Fire extinguisher
Horn
Paddle
Livewell System
Aft 30-gal. (113.56 L) rotomolded GUARDIAN™ livewell w/divider, timer & rounded corners
500 GPH (1,893 LPH) aerator/fill pump
500 GPH (1,893 LPH) livewell recirculation/pump-out system
Livewell control valve
Trolling Motor
Minn Kota® Maxxum® 24V, 70-lb. (31.75 kg) thrust, 42" (1.07 m) shaft trolling motor w/mount
Trolling motor pedal recess
Console
Modular, aerodynamic console design w/expanded leg clearance & large fishfinder surface
Removable acrylic, tinted plexiglass windscreen
Lowrance® Eagle 5 flush-mounted fishfinder
NEW Z3 digital gauges
Dash light dimmer
Water-resistant switch panels
Tilt hydraulic steering
12V outlet
LED courtesy light
Ready to accept optional removable port console
Interior
34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility
Bike seat w/pedestal
Folding fishing seat w/composite frame
Bow tool/drink holder
Bow port & starboard rod hold-down straps
Molded-in drainage channels around bow storage compartments
Oversized, lockable bow port & starboard rod lockers w/lift assists for rods up to 8' (2.44 m)
Oversized lockable bow center storage locker
Step to bow deck w/62-qt. (58.67 L) insulated cooler & removable trash receptacle
Footrest w/non-skid mat under console(s)
Z-CORE™ seating system w/Force Flex suspension & contoured, rotomolded frame for driver & passenger seats
Low driver & passenger flat seat mounting
Designated net storage behind seating
Passenger rod ramp w/rod handle organizer & hold-down strap
2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
Insulated aluminum lids w/welded corners
16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
Lockable latches
Performance
NITRO VORTEX TECHNOLOGY™ (NVT™) hull for a smoother, drier ride
RAPID PLANING SYSTEM™ (RPS™) for quicker holeshots & maximized speed
Rigging tube for organized wiring & abrasion resistance
Stainless steel propeller
Construction & Exterior
100% composite deck core w/superior thermal stability & strength-to-weight ratio
Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
Gelcoated stringer/liner system
Foam-filled hull for optimal buoyancy & safety
Full-width fiberglass-encapsulated composite transom
Splashwell protective film
Black hardware
Electrical
Angled bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount most 12" (30.5 cm) fishfinders
LED console courtesy light
Interstate® cranking battery
2 heavy-duty Interstate® trolling batteries
3-bank, 30-amp onboard battery charger w/exterior receptacle
6-gauge trolling motor wiring w/50-amp circuit breaker
Automotive-style labeled fuse panel w/cover
Master power switch
Waterproof Deutsch connectors on gauges
Water- & abrasion-resistant connectors
Trailer
Custom-fit, single-axle NITRO® trailer powdercoated w/GALVASHIELD® Impact corrosion & chip protection for improved durability
14" (35.56 cm) chrome wheels w/radial tires
Hub system w/1-year limited warranty
Spare tire
All-welded rectangular GALVASHIELD® frame
7-pin connector
Space-saving swing-away tongue to reduce storage length
Fold-away tongue jack
Heavy-duty winch w/nylon strap & bow safety strap
Outboard motor support to reduce hull & transom stress while towing
Carpeted bunks & fender boards to protect hull
Submersible LED lights
Retractable transom tie downs
Safety cables
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
Price History
| Date | Event | Price |
|---|---|---|
| 5/9/26 | Price decreased | $43,520(-8.4%) |
| 5/3/26 | Price increased | $47,520(+6.7%) |
| 4/21/26 | Initial price | $44,520 |
2026 Nitro Z18 Video Tours
Boattest.com Review
Overview
The Nitro Z18 bass boat is an 18-foot 8-inch vessel designed for serious bass anglers seeking high performance and speed. Powered by Mercury's new 150 horsepower 3.0-liter inline 4 Pro XS 4-stroke outboard engine, the Z18 aims to deliver improved torque, acceleration, and overall efficiency compared to its predecessor, the Mercury 2-stroke Optimax. This review provides a comprehensive evaluation of the boat's performance, design, and features.
Power and Performance
The Mercury 150 Pro XS engine powering the Nitro Z18 is based on a 3.0-liter inline 4-cylinder block introduced in 2012 but features significant enhancements. It boasts the highest displacement and lowest weight in its class at 456 pounds, along with the highest alternator output of 60 amps. Key improvements include transient spark calibration that increases torque by 5 to 7 percent for better acceleration, a revised gear ratio of 2.08:1 in the 4.8-inch gear case to boost torque, and four raw water pickups in the gear case nose cone allowing for higher engine mounting and greater trim flexibility. During testing with two people aboard and a full fuel tank, the Z18 reached a top speed of 60.2 miles per hour at wide open throttle using a 25-inch Fury 4-blade propeller. Cruising at 3,000 RPM yielded 25.7 miles per hour and 6.4 miles per gallon, providing a range of 231 statute miles with a 10% fuel reserve. The boat demonstrated quick acceleration, planing in 4.1 seconds, reaching 20 mph in 4.6 seconds, and 30 mph in 6.4 seconds. Handling was responsive with smooth sweeping turns at moderate speeds.
Exterior Design and Deck Layout
The Nitro Z18 features a beam of 7 feet 10 inches and provides ample deck space for fishing activities. Access to the boat is facilitated by a fold-up ladder located on the port side. The aft fishing deck measures 6 feet 7 inches by 2 feet 3 inches, offering generous casting room. Underneath the deck hatches are compartments housing the batteries, a 30-gallon divided live well, and dry storage with removable plastic tubs on either side. The forward fishing area spans 6 feet 7 inches wide at the aft section, tapering to 5 feet 2 inches forward, with a depth of 4 feet 2 inches at the forward aft area. This space includes a wastebasket and a 62-quart draining cooler that can be outfitted with an optional sandwich tray. Additional exterior features include four 4.5-inch pull-up cleats, cup holders, and tool racks mounted outboard on each side. The boat is equipped with a Minn Kota Maxim trolling motor delivering 70 pounds of thrust and controlled by a foot pedal, enhancing maneuverability in fishing scenarios. The Z18 is trailered on a single-axle unit with a swing-away tongue, carpeted bunks, and a motor support, making it a ready-to-use package.
Helm and Controls
The helm console is designed for ergonomic operation and comfort. It is topped with a windscreen and features an instrument panel centered around a 5-inch Lowrance Hook 5X fish finder. Flanking the fish finder are SmartKraft multifunction gauges, with the tachometer positioned to port and the speedometer to starboard. The steering wheel is mounted on a tilt hydraulic helm for adjustable driver comfort. The throttle and shift controls are conventional mechanical units, with a remote trim switch allowing the engine to be tilted up for trailering. The boat includes a master power switch adjacent to the ignition key that disables electrical power to accessories, preventing battery drain. Storage for fishing rods is conveniently located ahead of the companion seat on the port side, complemented by a rubber mat on the gunwale to protect reel finishes.
Additional Engine Features and Maintenance
The Mercury 150 Pro XS engine incorporates several practical design elements to enhance durability and ease of maintenance. The gear case includes low water pickups that facilitate higher engine installation and compatibility with jack plates, beneficial for navigating shallow waters. Engine mounts have been stiffened slightly to improve stability. The engine cowl features updated graphics and a streamlined profile. A maintenance decal is prominently displayed on the motor's side for quick reference. The alternator's 60-amp output is the highest among four-cylinder four-stroke engines, and the idle charge battery management system automatically increases idle speed to produce 20 amps when low battery voltage is detected, ensuring reliable battery maintenance.
Conclusion
The Nitro Z18 bass boat, equipped with Mercury's 150 Pro XS outboard, represents a well-rounded package for bass anglers who prioritize speed, torque, and functional fishing features. Its combination of advanced engine technology, efficient fuel consumption, responsive handling, and thoughtfully designed fishing spaces makes it a competitive choice in its class. The inclusion of standard equipment such as the Minn Kota trolling motor and a quality trailer further enhances its value as a turnkey fishing platform.
Overview from around the web 2026 Nitro Z18
The 2026 Nitro Z18 is receiving enthusiastic feedback from customers who appreciate its blend of performance, design, and features
Many users highlight the boat's impressive stability and smooth handling on the water, making it ideal for both casual outings and competitive fishing. Customers rave about the spacious layout, which provides ample storage for gear and personal items, allowing for a clutter-free experience while out on the water. The upgraded fishing features, including the well-designed livewell and rod storage, have also garnered praise, making it a favorite among avid anglers. Additionally, the build quality and durability are frequently mentioned, with many users commenting on the boat’s resilience against various water conditions. The sleek and modern aesthetic of the Nitro Z18 is another point of admiration, with its striking design catching the eye of fellow boaters. Overall, the 2026 Nitro Z18 is recognized for delivering a great value proposition, combining cutting-edge technology with user-friendly features, making it a standout choice in the boating community.
Made For
The 2026 Nitro Z18 is designed for passionate anglers and boating enthusiasts who seek the perfect blend of performance, versatility, and comfort. Whether you're a seasoned pro or a weekend warrior, this boat caters to individuals who value quality craftsmanship and innovative features. Ideal for freshwater fishing or leisurely outings, the Z18 provides ample space and storage to accommodate all your gear. With cutting-edge technology and a spacious layout, it's perfect for those who prioritize both functionality and style. Designed for families, friends, or solo adventurers, the 2026 Nitro Z18 is your go-to vessel for memorable days on the water, delivering a thrilling experience for everyone, regardless of skill level.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Illinois, United States Similar to the 2026 Nitro Z18
Compare with similar boats and find the perfect one for you.
 2026 Nitro Z18 | |||||
|---|---|---|---|---|---|
| $43,520 | $43,520 | $41,799 | $39,600 | $36,810 | $51,799 |
| East Peoria | Bolingbrook | Hoffman Estates | Hoffman Estates | East Peoria | Bolingbrook |
| 19' | 19' | 19' | 17' | 17' | 19' |
| MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE |
| 150 hp | 150 hp | 150 hp | 115 hp | 115 hp | 200 hp |
| 29 | 68 | 582 | 8 | 60 | 581 |
Other 2026 Nitro Z18 For Sale in Illinois, United States
Other Nitro Z18 boats for sale in Illinois, United States
Other Nitro boats for sale in Illinois, United States
Meet the Broker
Address
Boat Location
Contact Bass Pro Boating Center | East Peoria, IL about 2026 Nitro Z18
1000 Bass Pro Shops Drive, East Peoria, IL, 61611
Login with Google