2025 Nitro Z18

$45,415

New

Boat in Sylacauga, AL 35150 US

builtBuilt in 2025
Year the boat was built
model

Z18

Boat model
engine

1 Engine (MERCURY MARINE)

Engine type and count
length

18.7 feet

Overall boat length
fuel

Gas

Fuel type
material

Fiberglass/Reinforced

Hull material
Base Price
$41,995
- Included Options
$1,700
- Prep
$495
- Freight
$1,225
Your Price
$45,415
Nominal Length
18.67ft
Beam
7.83ft
Drive Up Draft
1.25ft
Deadrise At Transom
16deg
Dry Weight
1700lb
Fuel Tanks
40gal
Hull Material
fiberglass
Hull Shape
modified-vee
Engine 1
Engine Make
MERCURY MARINE
Engine Model
150L PXS4
Total Power
150hp
Engine Type
outboard
Fuel Type
gasoline
Additional Details
Additional Specs
  • Length:18' 8"

  • Beam: 7' 10"

  • Bottom Width: 6' 3"

  • Max. Recommended HP: 175 HP

  • Fuel Capacity: 40 gal.

  • Max. Person Capacity: 4 persons

  • Max. Person Weight: 550 lbs.

  • Max. Person, Motor & Gear Weight: 1350 lbs.

  • Interior Depth: 18.5"

  • Transom Height: 22.5"

  • Deadrise: 16 degrees

  • Draft: 15"

  • Average Dry Weight: 1700 lbs.

  • Average Package Weight: 3200 lbs.

  • Package Height: 6' 4"

  • Package Width: 8' 6"

  • Towing Length: 24' 1"

  • Storage Length: 21' 3"

Standard Features

Comfort, Convenience & Peace of Mind

  • NMMA® certified

  • Flotation meets or exceeds NMMA® & U.S. Coast Guard requirements

  • EPA-compliant fuel system

  • NEW Black non-skid bow & stern mats

  • Low-profile gunnels to maximize deck size & for easier casting

  • Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor

  • 5 stainless steel pull-up cleats, including cleat at driver seat

  • 4 grab handles (1 at each seat)

  • Fire extinguisher

  • Horn

  • Paddle

Livewell System

  • Aft 30-gal. (113.56 L) rotomolded GUARDIAN™ livewell w/divider, timer & rounded corners

  • 500 GPH (1,892.71 LPH) aerator/fill pump

  • 500 GPH (1,892.71 LPH) livewell recirculation/pump-out system

  • Livewell control valve

Trolling Motor

  • Minn Kota® Maxxum® 24V, 70-lb. (31.75 kg) thrust, 42" (1.07 m) shaft trolling motor w/mount

  • Trolling motor pedal recess

Console

  • NEW console decals

  • Modular, aerodynamic console design w/expanded leg clearance & large fishfinder surface

  • Removable acrylic, tinted plexiglass windscreen

  • NEW Lowrance® Eagle 5 flush-mounted fishfinder

  • Veethree® multifunction instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge

  • Dash light dimmer

  • Water-resistant switch panels

  • Tilt hydraulic steering

  • Below-console RAM® X-Grip® phone holder & 12V outlet

  • LED courtesy light

  • Ready to accept optional removable port console

Interior

  • 34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility

  • Bike seat w/pedestal

  • Folding fishing seat w/composite frame

  • NEW Z-CORE™ seating system w/Force Flex suspension & contoured, rotomolded frame for driver & passenger seats

  • Low driver & passenger flat seat mounting

  • Bow tool/drink holder

  • Bow port & starboard rod hold-down straps

  • Molded-in drainage channels around bow storage compartments

  • Oversized, lockable bow port & starboard rod lockers w/lift assists for rods up to 8' (2.44 m)

  • Oversized lockable bow center storage locker

  • Step to bow deck w/62-qt. (58.67 L) insulated cooler & removable trash receptacle

  • Partner rod ramp w/rod handle organizer & hold-down strap

  • Footrest w/non-skid mat under console(s)

  • Designated net storage behind seating

  • 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays

  • Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup

  • Insulated aluminum lids w/welded corners

  • 16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor

  • Lockable latches

Exterior

  • NITRO VORTEX TECHNOLOGY™ (NVT™) hull for a smoother, drier ride

  • RAPID PLANING SYSTEM™ (RPS™) for quicker holeshots & maximized speed

  • Rigging tube for organized wiring & abrasion resistance

  • Stainless steel propeller

Construction & Exterior

  • NEW hull & deck stripe color configuration

  • 100% composite deck core w/superior thermal stability & strength-to-weight ratio

  • Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)

  • Gelcoated stringer/liner system

  • Foam-filled hull for optimal buoyancy & safety

  • Full-width fiberglass-encapsulated composite transom

  • Splashwell protective film

  • NEW Black hardware

Electrical

  • Angled bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount most 12" (30.5 cm) fishfinders

  • LED console courtesy light

  • Automotive-style labeled fuse panel w/cover

  • Interstate® cranking battery

  • 2 heavy-duty Interstate® trolling batteries

  • 3-bank, 30-amp onboard battery charger w/exterior receptacle

  • 6-gauge trolling motor wiring w/50-amp circuit breaker

  • Master power switch

  • Waterproof Deutsch connectors on gauges

  • Water- & abrasion-resistant connectors

Trailer

  • Custom-fit, single-axle NITRO® trailer powdercoated w/GALVASHIELD® Impact corrosion & chip protection for improved durability

  • 7-pin connector

  • 14" (35.56 cm) chrome wheels w/radial tires

  • Hub system w/1-year limited warranty

  • Spare tire

  • All-welded rectangular GALVASHIELD® frame

  • Space-saving swing-away tongue to reduce storage length

  • Fold-away tongue jack

  • Heavy-duty winch w/nylon strap & bow safety strap

  • Outboard motor support to reduce hull & transom stress while towing

  • Carpeted bunks & fender boards to protect hull

  • Submersible LED lights

  • Retractable transom tie downs

  • Safety cables

Disclaimer
We employ best efforts to present accurate pricing, specifications, features and availability for models shown on this site. On occasion, data transmission errors may produce anomalies in information presented. Photos could show optional accessories not included in the listed price or not available on the actual model in stock. Should you have questions about what you see here, your dealer will be able to confirm correct availability, model content and pricing. Inventory shown is subject to prior sale or transfer to another location.

Price History

DateEventPrice
7/23/25Price increased$45,415(+2.6%)
6/28/25Initial price$44,245

Videos from Sylacauga Marine & ATV on this 2025 Nitro Z18

Contact Sylacauga Marine & ATV

2670 Old Birmingham Highway, Sylacauga, AL, 35150

Boattest.com Review

Overview

The Nitro Z18 bass boat is an 18-foot 8-inch vessel designed for serious bass anglers seeking high performance and speed. Powered by Mercury's new 150 horsepower 3.0-liter inline 4 Pro XS 4-stroke outboard engine, the Z18 aims to deliver improved torque, acceleration, and overall efficiency compared to its predecessor, the Mercury 2-stroke Optimax. This review provides a comprehensive evaluation of the boat's performance, design, and features.

Power and Performance

The Mercury 150 Pro XS engine powering the Nitro Z18 is based on a 3.0-liter inline 4-cylinder block introduced in 2012 but features significant enhancements. It boasts the highest displacement and lowest weight in its class at 456 pounds, along with the highest alternator output of 60 amps. Key improvements include transient spark calibration that increases torque by 5 to 7 percent for better acceleration, a revised gear ratio of 2.08:1 in the 4.8-inch gear case to boost torque, and four raw water pickups in the gear case nose cone allowing for higher engine mounting and greater trim flexibility. During testing with two people aboard and a full fuel tank, the Z18 reached a top speed of 60.2 miles per hour at wide open throttle using a 25-inch Fury 4-blade propeller. Cruising at 3,000 RPM yielded 25.7 miles per hour and 6.4 miles per gallon, providing a range of 231 statute miles with a 10% fuel reserve. The boat demonstrated quick acceleration, planing in 4.1 seconds, reaching 20 mph in 4.6 seconds, and 30 mph in 6.4 seconds. Handling was responsive with smooth sweeping turns at moderate speeds.

Exterior Design and Deck Layout

The Nitro Z18 features a beam of 7 feet 10 inches and provides ample deck space for fishing activities. Access to the boat is facilitated by a fold-up ladder located on the port side. The aft fishing deck measures 6 feet 7 inches by 2 feet 3 inches, offering generous casting room. Underneath the deck hatches are compartments housing the batteries, a 30-gallon divided live well, and dry storage with removable plastic tubs on either side. The forward fishing area spans 6 feet 7 inches wide at the aft section, tapering to 5 feet 2 inches forward, with a depth of 4 feet 2 inches at the forward aft area. This space includes a wastebasket and a 62-quart draining cooler that can be outfitted with an optional sandwich tray. Additional exterior features include four 4.5-inch pull-up cleats, cup holders, and tool racks mounted outboard on each side. The boat is equipped with a Minn Kota Maxim trolling motor delivering 70 pounds of thrust and controlled by a foot pedal, enhancing maneuverability in fishing scenarios. The Z18 is trailered on a single-axle unit with a swing-away tongue, carpeted bunks, and a motor support, making it a ready-to-use package.

Helm and Controls

The helm console is designed for ergonomic operation and comfort. It is topped with a windscreen and features an instrument panel centered around a 5-inch Lowrance Hook 5X fish finder. Flanking the fish finder are SmartKraft multifunction gauges, with the tachometer positioned to port and the speedometer to starboard. The steering wheel is mounted on a tilt hydraulic helm for adjustable driver comfort. The throttle and shift controls are conventional mechanical units, with a remote trim switch allowing the engine to be tilted up for trailering. The boat includes a master power switch adjacent to the ignition key that disables electrical power to accessories, preventing battery drain. Storage for fishing rods is conveniently located ahead of the companion seat on the port side, complemented by a rubber mat on the gunwale to protect reel finishes.

Additional Engine Features and Maintenance

The Mercury 150 Pro XS engine incorporates several practical design elements to enhance durability and ease of maintenance. The gear case includes low water pickups that facilitate higher engine installation and compatibility with jack plates, beneficial for navigating shallow waters. Engine mounts have been stiffened slightly to improve stability. The engine cowl features updated graphics and a streamlined profile. A maintenance decal is prominently displayed on the motor's side for quick reference. The alternator's 60-amp output is the highest among four-cylinder four-stroke engines, and the idle charge battery management system automatically increases idle speed to produce 20 amps when low battery voltage is detected, ensuring reliable battery maintenance.

Conclusion

The Nitro Z18 bass boat, equipped with Mercury's 150 Pro XS outboard, represents a well-rounded package for bass anglers who prioritize speed, torque, and functional fishing features. Its combination of advanced engine technology, efficient fuel consumption, responsive handling, and thoughtfully designed fishing spaces makes it a competitive choice in its class. The inclusion of standard equipment such as the Minn Kota trolling motor and a quality trailer further enhances its value as a turnkey fishing platform.

Overview from around the web 2025 Nitro Z18

Customers are raving about the 2025 Nitro Z18 for its exceptional performance and sleek design

Many highlight its powerful engine and smooth handling, making it ideal for both serious anglers and weekend adventurers. Users appreciate the spacious layout and thoughtful storage solutions, which help keep gear organized and accessible. The advanced technology features, including upgraded electronics and a user-friendly console, receive high marks for enhancing the overall boating experience. Overall, the 2025 Nitro Z18 is praised for combining speed, comfort, and versatility in a stylish package that meets the demands of modern boating enthusiasts.

The Biggest Pros and Cons

The 2025 Nitro Z18 offers a compelling blend of performance, comfort, and angler-focused features. Here are some of the key pros and cons to consider:

Pros

Powerful Performance: Equipped with a robust outboard motor and advanced hull design, the Z18 delivers impressive speed and handling, making it ideal for both fishing and recreational boating.

Spacious Layout: The boat’s wide beam and well-thought-out deck plan provide ample room for anglers to move around and store gear comfortably.

Premium Fishing Features: Includes multiple rod storage compartments, livewell systems, and integrated electronics options tailored for serious anglers.

Durability: Built with high-quality materials and a sturdy construction, the Z18 is designed to withstand varied water conditions and provide long-lasting reliability.

Modern Design: Sleek, stylish lines combined with ergonomic seating and intuitive controls enhance the overall boating experience.

Cons

Price Point: As a feature-rich, high-performance bass boat, the Z18 may come with a higher price tag compared to more basic models.

Size Limitations: While spacious for its class, the 18-foot length may not accommodate very large groups or extensive overnight gear.

Fuel Consumption: The powerful engine, while offering great speed, can lead to higher fuel usage, which is important to consider for longer trips.

Made For

The 2025 Nitro Z18 is designed for serious anglers who demand top-tier performance and versatility on the water. Whether you’re a tournament pro or a passionate weekend fisherman, this boat offers the speed, stability, and advanced features needed to elevate your fishing experience. Its spacious layout and cutting-edge technology make it ideal for those who want to fish hard all day while enjoying comfort and convenience.

Finance your dream boat!

Use our boat payment calculator to estimate monthly payments for 2025 Nitro Z18. Enter your down payment, choose a loan term, and adjust the interest rate to see an instant payment estimate — ideal if you're calculating boat payments before you enquire. Wondering how much does a Bass cost in today's market, or how much does a Nitro cost for similar models? This boat financing calculator helps you compare scenarios in seconds, whether you're considering used boat financing or a new purchase.
Monthly payment
$287.59/mo
$
$
%
Principal Loan Amount$ 38,603
Total Payment$69,020.73

Finance your dream boat!

Use our boat payment calculator to estimate monthly payments for 2025 Nitro Z18. Enter your down payment, choose a loan term, and adjust the interest rate to see an instant payment estimate — ideal if you're calculating boat payments before you enquire. Wondering how much does a Bass cost in today's market, or how much does a Nitro cost for similar models? This boat financing calculator helps you compare scenarios in seconds, whether you're considering used boat financing or a new purchase.
Monthly payment
$287.59/mo
$
$
%
Principal Loan Amount$ 38,603
Total Payment$69,020.73

Be the first to know when similar boats hit the market

Get notified when new boats become available

Boats For Sale in Alabama, United States Similar to the 2025 Nitro Z18

Compare with similar boats and find the perfect one for you.

The Image of Nitro Z18 2025 - 02025 Nitro Z18
$45,415$45,225$43,995$53,995$35,305$35,020
SylacaugaFlorenceSylacaugaSylacaugaSylacaugaFlorence
19'19'21'20'17'17'
MERCURY MARINEMERCURY MARINEMercurymercuryMERCURY MARINEMERCURY MARINE
150 hp150 hp250 hp250 hp115 hp115 hp
445188131571181
Price
Location
Nominal Length
Engine Make
Total Engine Power
Days on Market

Other Nitro Z18 boats for sale in Alabama, United States

Meet the Broker

Address

2670 Old Birmingham Highway
Sylacauga, AL 35150

Boat Location

Be the First to Know

Get notified when new boats become available.