2024 Nitro Z18 Sold Boat in Fairland, IN 46126 US
Built in 2024
Z18
1 Engine (mERCURY)
18.7 feet
Gas
Fiberglass/Reinforced
Boats For Sale in Indiana, United States Similar to the 2024 Nitro Z18
Compare with similar boats and find the perfect one for you.
 2024 Nitro Z18 | ||||||
|---|---|---|---|---|---|---|
| Price | $48,000 | $45,850 | $45,625 | $50,550 | $45,304 | $50,700 |
| Location | Fairland | Indianapolis | Portage | Clarksville | Hammond | Fairland |
| Nominal Length | 19' | 20' | 19' | 19' | 19' | 20' |
| Engine Make | mERCURY | Yamaha | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY |
| Total Engine Power | 175 hp | 225 hp | 150 hp | 150 hp | 150 hp | 250 hp |
| Days on Market | 170 | 62 | 28 | 182 | 301 | 173 |
| Get in touch |
Other 2024 Nitro Z18 For Sale in Indiana, United States
Other Nitro Z18 boats for sale in Indiana, United States
Other Nitro boats for sale in Indiana, United States
2024 Nitro Z18 - Loaded - Only 7 Hours - Mercury 175HP 4-Stroke
This is a consignment boat and we are unable to take a trade on this unit.
This 2024 Nitro Z18 is about as close to new as it gets without the new price tag. With only 7 hours on the Mercury 175HP 4-stroke, this rig is barely broken in and ready to go.
It's fully rigged with a serious electronics and fishing package that's hard to find on a Z18. Up front, you've got dual Humminbird Solix 10 units paired with Mega 360 and Mega Live 2, giving you unmatched visibility around the boat. At the console, a Humminbird Xplore 12 keeps everything clean and easy to read while running.
Boat control is dialed in with a Minn Kota Ultrex trolling motor and dual 8' Raptors, making this a true fish-catching setup whether you're shallow or offshore.
Performance and driver features include a Bob's hydraulic jackplate, hot foot throttle, and remote drain plug for added convenience at the ramp.
Warranty:
- Mercury factory warranty through 10/9/2026
- Mercury Gold extended warranty through 10/9/2028
Key Features:
- Only 7 hours on Mercury 175HP 4-stroke
- Minn Kota Ultrex trolling motor
- Humminbird Mega 360
- Humminbird Mega Live 2
- (2) Humminbird Solix 10 at the bow
- Humminbird Xplore 12 at the console
- Dual 8' Raptors
- Hot foot throttle
- Remote drain plug
- Bob's hydraulic jackplate
This is a turnkey, tournament-ready Z18 with thousands in upgrades already done. If you're looking for a loaded boat without the wait or added cost, this one checks every box.
Length:18' 8"
Beam: 7' 10"
Bottom Width: 6' 3"
Max. Recommended HP: 175 HP
Fuel Capacity: 40 gal.
Max. Person Capacity: 4 persons
Max. Person Weight: 550 lbs.
Max. Person, Motor & Gear Weight: 1350 lbs.
Interior Depth: 18.5"
Transom Height: 22.5"
Deadrise: 16 degrees
Draft: 15"
Average Dry Weight: 1700 lbs.
Average Package Weight: 3200 lbs.
Package Height: 6' 4"
Package Width: 8' 6"
Towing Length: 24' 1"
Storage Length: 21' 3"
Comfort, Convenience & Peace of Mind
- NMMA® certified
- Flotation meets or exceeds NMMA® & U.S. Coast Guard requirements
- EPA-compliant fuel system
- Non-skid bow & stern mats
- Low-profile gunnels to maximize deck size & for easier casting
- Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
- 5 stainless steel pull-up cleats, including cleat at driver seat
- 4 grab handles (1 at each seat)
- Fire extinguisher
- Horn
- Paddle
Livewell System
- Aft 30-gal. (113.56 L) rotomolded GUARDIAN™ livewell w/divider, timer & rounded corners
- 500 GPH (1,892.71 LPH) aerator/fill pump
- 500 GPH (1,892.71 LPH) livewell recirculation/pump-out system
- Livewell control valve
Trolling Motor
- Minn Kota® Maxxum® 24V, 70-lb. (31.75 kg) thrust, 42" (1.07 m) shaft, foot-control trolling motor w/mount
- Trolling motor pedal recess
Console
- Modular, aerodynamic console design w/expanded leg clearance & large fishfinder surface
- Removable acrylic, tinted windscreen
- Lowrance® HOOK Reveal 5C flush-mounted fishfinder
- Veethree® multifunction instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
- Dash light dimmer
- Water-resistant switch panels
- Tilt hydraulic steering
- Below-console RAM® X-Grip® phone holder & 12V outlet
- LED courtesy light
- Ready to accept optional removable port console
Interior
- 34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility
- Bike seat w/pedestal
- Folding fishing seat w/composite frame
- Z-CORE™ seating system w/Force Flex suspension & contoured, rotomolded frame for driver & passenger seats
- Low driver & passenger flat seat mounting
- Bow tool/drink holder
- Bow port & starboard rod hold-down straps
- Molded-in drainage channels around bow storage compartments
- Oversized, lockable bow port & starboard rod lockers w/lift assists for rods up to 8' (2.44 m)
- Oversized lockable bow center storage locker
- Step to bow deck w/62-qt. (58.67 L) insulated cooler, removable trash receptacle & snap-in sandwich tray
- Partner rod ramp w/rod handle organizer & hold-down strap
- Footrest w/non-skid mat under console(s)
- Designated net storage behind seating
- 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
- Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
- Insulated aluminum lids w/welded corners
- 16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
- Lockable latches
Performance
- NITRO VORTEX TECHNOLOGY™ (NVT™) hull for a smoother, drier ride
- RAPID PLANING SYSTEM™ (RPS™) for quicker holeshots & maximized speed
- Rigging tube for organized wiring & abrasion resistance
- Stainless steel propeller
Construction & Exterior
- 100% composite deck core w/superior thermal stability & strength-to-weight ratio
- Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
- Gelcoated stringer/liner system
- Foam-filled hull for optimal buoyancy & safety
- Full-width fiberglass-encapsulated composite transom
- Splashwell protective film
Electrical
- Angled bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount most 12" (30.5 cm) fishfinders
- LED console courtesy light
- Automotive-style labeled fuse panel w/cover
- Interstate® cranking battery
- 2 heavy-duty Interstate® trolling batteries
- 3-bank, 30-amp onboard battery charger w/exterior receptacle
- 6-gauge trolling motor wiring w/50-amp circuit breaker
- Master power switch
- Waterproof Deutsch connectors on gauges
- Water- & abrasion-resistant connectors
Trailer
- Custom-fit, single-axle NITRO® trailer powdercoated w/GALVASHIELD® Impact corrosion & chip protection for improved durability
- 7-pin connector
- 14" (35.56 cm) chrome wheels w/radial tires
- Hub system w/1-year limited warranty
- Spare tire
- All-welded rectangular GALVASHIELD® frame
- Space-saving swing-away tongue to reduce storage length
- Fold-away tongue jack
- Heavy-duty winch w/nylon strap & bow safety strap
- Outboard motor support to reduce hull & transom stress while towing
- Carpeted bunks & fender boards to protect hull
- Submersible LED lights
- Retractable transom tie downs
- Safety cables
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 3/25/26 | Initial price | $48,000 |
2024 Nitro Z18 Video Tours
Nitro Z18: BoatTEST Review
Overview
The Nitro Z18 bass boat is an 18-foot 8-inch vessel designed for serious bass anglers seeking high performance and speed. Powered by Mercury's new 150 horsepower 3.0-liter inline 4 Pro XS 4-stroke outboard engine, the Z18 aims to deliver improved torque, acceleration, and overall efficiency compared to its predecessor, the Mercury 2-stroke Optimax. This review provides a comprehensive evaluation of the boat's performance, design, and features.
Power and Performance
The Mercury 150 Pro XS engine powering the Nitro Z18 is based on a 3.0-liter inline 4-cylinder block introduced in 2012 but features significant enhancements. It boasts the highest displacement and lowest weight in its class at 456 pounds, along with the highest alternator output of 60 amps. Key improvements include transient spark calibration that increases torque by 5 to 7 percent for better acceleration, a revised gear ratio of 2.08:1 in the 4.8-inch gear case to boost torque, and four raw water pickups in the gear case nose cone allowing for higher engine mounting and greater trim flexibility. During testing with two people aboard and a full fuel tank, the Z18 reached a top speed of 60.2 miles per hour at wide open throttle using a 25-inch Fury 4-blade propeller. Cruising at 3,000 RPM yielded 25.7 miles per hour and 6.4 miles per gallon, providing a range of 231 statute miles with a 10% fuel reserve. The boat demonstrated quick acceleration, planing in 4.1 seconds, reaching 20 mph in 4.6 seconds, and 30 mph in 6.4 seconds. Handling was responsive with smooth sweeping turns at moderate speeds.
Exterior Design and Deck Layout
The Nitro Z18 features a beam of 7 feet 10 inches and provides ample deck space for fishing activities. Access to the boat is facilitated by a fold-up ladder located on the port side. The aft fishing deck measures 6 feet 7 inches by 2 feet 3 inches, offering generous casting room. Underneath the deck hatches are compartments housing the batteries, a 30-gallon divided live well, and dry storage with removable plastic tubs on either side. The forward fishing area spans 6 feet 7 inches wide at the aft section, tapering to 5 feet 2 inches forward, with a depth of 4 feet 2 inches at the forward aft area. This space includes a wastebasket and a 62-quart draining cooler that can be outfitted with an optional sandwich tray. Additional exterior features include four 4.5-inch pull-up cleats, cup holders, and tool racks mounted outboard on each side. The boat is equipped with a Minn Kota Maxim trolling motor delivering 70 pounds of thrust and controlled by a foot pedal, enhancing maneuverability in fishing scenarios. The Z18 is trailered on a single-axle unit with a swing-away tongue, carpeted bunks, and a motor support, making it a ready-to-use package.
Helm and Controls
The helm console is designed for ergonomic operation and comfort. It is topped with a windscreen and features an instrument panel centered around a 5-inch Lowrance Hook 5X fish finder. Flanking the fish finder are SmartKraft multifunction gauges, with the tachometer positioned to port and the speedometer to starboard. The steering wheel is mounted on a tilt hydraulic helm for adjustable driver comfort. The throttle and shift controls are conventional mechanical units, with a remote trim switch allowing the engine to be tilted up for trailering. The boat includes a master power switch adjacent to the ignition key that disables electrical power to accessories, preventing battery drain. Storage for fishing rods is conveniently located ahead of the companion seat on the port side, complemented by a rubber mat on the gunwale to protect reel finishes.
Additional Engine Features and Maintenance
The Mercury 150 Pro XS engine incorporates several practical design elements to enhance durability and ease of maintenance. The gear case includes low water pickups that facilitate higher engine installation and compatibility with jack plates, beneficial for navigating shallow waters. Engine mounts have been stiffened slightly to improve stability. The engine cowl features updated graphics and a streamlined profile. A maintenance decal is prominently displayed on the motor's side for quick reference. The alternator's 60-amp output is the highest among four-cylinder four-stroke engines, and the idle charge battery management system automatically increases idle speed to produce 20 amps when low battery voltage is detected, ensuring reliable battery maintenance.
Conclusion
The Nitro Z18 bass boat, equipped with Mercury's 150 Pro XS outboard, represents a well-rounded package for bass anglers who prioritize speed, torque, and functional fishing features. Its combination of advanced engine technology, efficient fuel consumption, responsive handling, and thoughtfully designed fishing spaces makes it a competitive choice in its class. The inclusion of standard equipment such as the Minn Kota trolling motor and a quality trailer further enhances its value as a turnkey fishing platform.
Overview from around the web 2024 Nitro Z18
Customers are raving about the 2024 Nitro Z18 for its exceptional performance and sleek design
Many highlight its powerful Mercury engine options that deliver impressive speed and smooth handling on the water. Anglers appreciate the spacious deck layout, which provides ample room for casting and gear storage, making it ideal for both serious fishing trips and leisurely outings. The advanced electronics package, including a high-definition fish finder and GPS system, receives praise for enhancing navigation and fish tracking. Overall, the Nitro Z18 is celebrated for combining cutting-edge technology with comfort and reliability, making it a top choice for fishing enthusiasts.
The Biggest Pros and Cons
The 2024 Nitro Z18 offers a range of advantages and a few considerations to keep in mind:
Pros
Powerful Performance: Equipped with a robust engine, the Z18 delivers impressive speed and acceleration, ideal for both casual cruising and competitive fishing.
Spacious Design: Its roomy deck layout provides ample space for anglers to move around comfortably and store gear efficiently.
Advanced Electronics: Comes with upgraded fish-finding and navigation systems, enhancing the fishing experience with greater precision.
Durability: Built with high-quality materials, the Z18 is designed to withstand various water conditions while maintaining structural integrity.
Comfort Features: Includes ergonomic seating and user-friendly controls, ensuring a comfortable ride during long outings.
Cons
Price Point: The advanced features and build quality can result in a higher purchase price compared to entry-level models.
Fuel Consumption: Powerful engines may lead to increased fuel usage, which could be a consideration for longer trips.
Size: While spacious, the Z18’s size may require a larger trailer and towing vehicle, which might not be convenient for all users.
Made For
The 2024 Nitro Z18 is designed for serious anglers who demand top performance on the water. Whether you're a tournament competitor or a passionate weekend fisherman, this boat offers the speed, precision, and advanced features needed to elevate your fishing experience. Its spacious layout and cutting-edge technology make it ideal for those who want to fish hard, stay organized, and enjoy every moment on the lake.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Want to update the details or images for this boat? Claim this listing by getting in touch.
Boat Location
Contact Brownies Marine about 2024 Nitro Z18
P.O. Box 215, 2544 W. 400 N., Fairland, IN, 46126
Login with Google