2022 Nitro Z18 Boat in Oakwood, GA 30566 US
Z18
1 Engine (Mercury)
18.7 feet
Gas
Fiberglass/Reinforced
2022 Nitro Z18 - Mercury Pro XS 150
Built for serious anglers and weekend adventurers alike, this 2022 Nitro Z18 delivers the performance, fishability, and reliability that have made the model one of the most popular fiberglass bass boats on the market. Powered by a Mercury Pro XS 150 outboard with only 95 hours, this tournament-ready rig is equipped with the electronics and features needed to hit the water immediately.
A Lowrance trolling motor provides precise boat control, while dual Lowrance fish finders at the bow and console keep you on the fish with confidence. The package also includes the matching trailer, making transportation and storage simple and convenient.
Whether you're fishing local tournaments or spending the day on the lake, this well-equipped Nitro Z18 is ready for its next owner.
Highlights
- Mercury Pro XS 150 Outboard
- Only 95 Engine Hours
- Lowrance Trolling Motor
- Dual Lowrance Fish Finders
- Trailer Included
Length:18' 8"
Length: 18' 8"
Beam: 7' 10"
Bottom Width: 6' 3"
Max. Recommended HP: 175 HP
Fuel Capacity: 40 gal.
Max. Person Capacity: 4 persons
Max. Person Weight: 550 lbs.
Max. Person, Motor & Gear Weight: 1350 lbs.
Interior Depth: 18.5"
Transom Height: 22.5"
Deadrise: 16 degrees
Draft: 15"
Average Dry Weight: 1700 lbs.
Average Package Weight: 3200 lbs.
Package Height: 6' 4"
Package Width: 8' 6"
Towing Length: 24' 1"
Storage Length: 21' 3"
Comfort, Convenience & Peace of Mind
NMMA® certified
Flotation meets or exceeds NMMA® & U.S. Coast Guard requirements
EPA-compliant fuel system
Non-skid bow & stern mats
6 drink holders
5 stainless steel pull-up cleats, including NEW cleat at driver seat
4 grab handles (1 at each seat)
Fire extinguisher
Horn
Paddle
Livewell Systems
Aft 30-gal. (113.56 L) GUARDIAN™ aerated livewell w/divider & timer
NEW livewell control valve
500 GPH (1,892.71 LPH) livewell recirculation/pump-out system
500 GPH (1,892.71 LPH) aerator/fill pump
Rotomolded w/rounded corners
Trolling Motor
Minn Kota® Maxxum® 24V, 70-lb. (31.75 kg) thrust, 42" (1.07 m) shaft, foot-control trolling motor
Trolling motor pedal recess
Console
Modular, aerodynamic console design w/expanded leg clearance & large fishfinder surface
Removable acrylic, tinted windscreen
Lowrance® HOOK Reveal 5C flush-mounted fishfinder
Veethree® multifunction instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
Dash light dimmer
Water-resistant switch panels
Tilt hydraulic steering w/NEW steering wheel
NEW below-console RAM® X-Grip® phone holder & 12V outlet
LED courtesy light
Ready to accept optional removable port console
Interior
34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility
Bike seat w/pedestal
Folding fishing seat w/composite frame
Z-CORE™ seating system w/Force Flex suspension & contoured, rotomolded frame for driver & passenger seats
Low driver & passenger flat seat mounting
NEW bow tool/drink holder
Bow port & starboard rod hold-down straps
Molded-in drainage channels around bow storage compartments
Oversized, lockable bow port & starboard rod lockers w/lift assists for rods up to 8' (2.44 m)
Oversized lockable bow center storage locker
Step to bow deck w/62-qt. (58.67 L) insulated cooler, removable trash receptacle & NEW snap-in sandwich tray
Partner rod ramp w/rod handle organizer & hold-down strap
Designated net storage behind seating
2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
Insulated aluminum lids w/welded corners
16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
Lockable latches
Performance
NITRO VORTEX TECHNOLOGY™ (NVT™) hull for a smoother, drier ride
RAPID PLANING SYSTEM™ (RPS™) for quicker holeshots & maximized speed
Rigging tube for organized wiring & abrasion resistance
Stainless steel propeller
Construction & Exterior
100% composite deck core w/superior thermal stability & strength-to-weight ratio
Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
Gelcoated stringer/liner system
Foam-filled hull for optimal buoyancy & safety
Full-width fiberglass-encapsulated composite transom
Low-profile gunnels to maximize deck size & for easier casting
Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
Electrical
Angled bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount most 12" (30.5 cm) fishfinders
LED console courtesy light
Automotive-style labeled fuse panel w/cover
Interstate® cranking battery
2 heavy-duty Interstate® trolling batteries
2-bank, 10-amp battery charger w/exterior receptacle
6-gauge trolling motor wiring w/50-amp circuit breaker
Master power switch
Waterproof Deutsch plugin gauge connectors
Water/abrasion-resistant connectors
Trailer
Custom-fit, single-axle NITRO® trailer powdercoated w/GALVASHIELD® Impact corrosion & chip protection for improved durability
NEW OPTIONAL custom-fit, tandem-axle steel NITRO® trailer available
7-pin connector
14" (35.56 cm) chrome wheels w/radial tires
Hub system w/1-year limited warranty
All-welded rectangular GALVASHIELD® frame
Space-saving swing-away tongue to reduce storage length
Fold-away tongue jack
Heavy-duty winch w/nylon strap & bow safety strap
Outboard motor support to reduce hull & transom stress while towing
Carpeted bunks & fender boards to protect hull
Submersible LED lights
NEW retractable transom tie downs
Safety cables
National, its agents and brokers, offer the details and descriptions of the vessels in good faith but do not guarantee, warrant, or represent the accuracy of the information or guarantee, warrant, or represent the description or condition of the vessels. A buyer should verify the description and condition of any vessel through an inspection by a qualified surveyor and/or mechanic. The vessels are offered subject to prior sale, price change or withdrawal without notice. National makes no guarantees, representations, or warranties as to title and the ability to document or register the vessel. National is acting as a broker only and all issues as to title, documentation and registration are between the buyer and seller.
Price History
| Date | Event | Price |
|---|---|---|
| 7/16/26 | Initial price | $29,900 |
Nitro Z18: BoatTEST Review
Overview
The Nitro Z18 bass boat is an 18-foot 8-inch vessel designed for serious bass anglers seeking high performance and speed. Powered by Mercury's new 150 horsepower 3.0-liter inline 4 Pro XS 4-stroke outboard engine, the Z18 aims to deliver improved torque, acceleration, and overall efficiency compared to its predecessor, the Mercury 2-stroke Optimax. This review provides a comprehensive evaluation of the boat's performance, design, and features.
Power and Performance
The Mercury 150 Pro XS engine powering the Nitro Z18 is based on a 3.0-liter inline 4-cylinder block introduced in 2012 but features significant enhancements. It boasts the highest displacement and lowest weight in its class at 456 pounds, along with the highest alternator output of 60 amps. Key improvements include transient spark calibration that increases torque by 5 to 7 percent for better acceleration, a revised gear ratio of 2.08:1 in the 4.8-inch gear case to boost torque, and four raw water pickups in the gear case nose cone allowing for higher engine mounting and greater trim flexibility. During testing with two people aboard and a full fuel tank, the Z18 reached a top speed of 60.2 miles per hour at wide open throttle using a 25-inch Fury 4-blade propeller. Cruising at 3,000 RPM yielded 25.7 miles per hour and 6.4 miles per gallon, providing a range of 231 statute miles with a 10% fuel reserve. The boat demonstrated quick acceleration, planing in 4.1 seconds, reaching 20 mph in 4.6 seconds, and 30 mph in 6.4 seconds. Handling was responsive with smooth sweeping turns at moderate speeds.
Exterior Design and Deck Layout
The Nitro Z18 features a beam of 7 feet 10 inches and provides ample deck space for fishing activities. Access to the boat is facilitated by a fold-up ladder located on the port side. The aft fishing deck measures 6 feet 7 inches by 2 feet 3 inches, offering generous casting room. Underneath the deck hatches are compartments housing the batteries, a 30-gallon divided live well, and dry storage with removable plastic tubs on either side. The forward fishing area spans 6 feet 7 inches wide at the aft section, tapering to 5 feet 2 inches forward, with a depth of 4 feet 2 inches at the forward aft area. This space includes a wastebasket and a 62-quart draining cooler that can be outfitted with an optional sandwich tray. Additional exterior features include four 4.5-inch pull-up cleats, cup holders, and tool racks mounted outboard on each side. The boat is equipped with a Minn Kota Maxim trolling motor delivering 70 pounds of thrust and controlled by a foot pedal, enhancing maneuverability in fishing scenarios. The Z18 is trailered on a single-axle unit with a swing-away tongue, carpeted bunks, and a motor support, making it a ready-to-use package.
Helm and Controls
The helm console is designed for ergonomic operation and comfort. It is topped with a windscreen and features an instrument panel centered around a 5-inch Lowrance Hook 5X fish finder. Flanking the fish finder are SmartKraft multifunction gauges, with the tachometer positioned to port and the speedometer to starboard. The steering wheel is mounted on a tilt hydraulic helm for adjustable driver comfort. The throttle and shift controls are conventional mechanical units, with a remote trim switch allowing the engine to be tilted up for trailering. The boat includes a master power switch adjacent to the ignition key that disables electrical power to accessories, preventing battery drain. Storage for fishing rods is conveniently located ahead of the companion seat on the port side, complemented by a rubber mat on the gunwale to protect reel finishes.
Additional Engine Features and Maintenance
The Mercury 150 Pro XS engine incorporates several practical design elements to enhance durability and ease of maintenance. The gear case includes low water pickups that facilitate higher engine installation and compatibility with jack plates, beneficial for navigating shallow waters. Engine mounts have been stiffened slightly to improve stability. The engine cowl features updated graphics and a streamlined profile. A maintenance decal is prominently displayed on the motor's side for quick reference. The alternator's 60-amp output is the highest among four-cylinder four-stroke engines, and the idle charge battery management system automatically increases idle speed to produce 20 amps when low battery voltage is detected, ensuring reliable battery maintenance.
Conclusion
The Nitro Z18 bass boat, equipped with Mercury's 150 Pro XS outboard, represents a well-rounded package for bass anglers who prioritize speed, torque, and functional fishing features. Its combination of advanced engine technology, efficient fuel consumption, responsive handling, and thoughtfully designed fishing spaces makes it a competitive choice in its class. The inclusion of standard equipment such as the Minn Kota trolling motor and a quality trailer further enhances its value as a turnkey fishing platform.
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Georgia, United States Similar to the 2022 Nitro Z18
Compare with similar boats and find the perfect one for you.
2022 Nitro Z18 | |||||
|---|---|---|---|---|---|
| $29,900 | $35,680 | $35,910 | $36,030 | $36,625 | $37,125 |
| Oakwood | Macon | Acworth | Brunswick | Augusta | Perry |
| 19' | 17' | 17' | 17' | 17' | 17' |
| Mercury | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | - |
| 150 hp | 115 hp | 115 hp | 115 hp | 115 hp | - |
| 1 | 344 | 236 | 287 | 104 | 29 |
Other Nitro Z18 boats for sale in Georgia, United States
Other Nitro boats for sale in Georgia, United States
Meet the Broker

Address
Boat Location
Contact National Yacht Sales about 2022 Nitro Z18
300 North Federal Hwy, Dania Beach, FL, 33004


























