2022 Nitro Z18 Sold Boat in Kodak, TN 37764 US
Built in 2022
Z18
--
18.7 feet
--
Fiberglass/Reinforced
Boats For Sale in Tennessee, United States Similar to the 2022 Nitro Z18
Compare with similar boats and find the perfect one for you.
 2022 Nitro Z18 | |||||
|---|---|---|---|---|---|
| Price | $35,450 | $31,250 | $31,240 | $31,085 | $30,495 |
| Location | Kodak | Lexington | Chattanooga | Winchester | Memphis |
| Nominal Length | 19' | 18' | 17' | 17' | 17' |
| Engine Make | - | - | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE |
| Total Engine Power | - | - | 90 hp | 75 hp | 90 hp |
| Days on Market | 379 | 40 | 23 | 174 | 357 |
| Get in touch |
Other Nitro Z18 boats for sale in Tennessee, United States
Other Nitro boats for sale in Tennessee, United States
Clean, LOW hours (49) 2022 Nitro Z18 SC
Tandem Axle Trailer, 24V Ultrex Trolling Motor, 9" Garmin @ the Console, 9" Helix @ the Bow
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
Price History
| Date | Event | Price |
|---|---|---|
| 8/30/25 | Initial price | $35,450 |
2022 Nitro Z18 Video Tours
Nitro Z18: BoatTEST Review
Overview
The Nitro Z18 bass boat is an 18-foot 8-inch vessel designed for serious bass anglers seeking high performance and speed. Powered by Mercury's new 150 horsepower 3.0-liter inline 4 Pro XS 4-stroke outboard engine, the Z18 aims to deliver improved torque, acceleration, and overall efficiency compared to its predecessor, the Mercury 2-stroke Optimax. This review provides a comprehensive evaluation of the boat's performance, design, and features.
Power and Performance
The Mercury 150 Pro XS engine powering the Nitro Z18 is based on a 3.0-liter inline 4-cylinder block introduced in 2012 but features significant enhancements. It boasts the highest displacement and lowest weight in its class at 456 pounds, along with the highest alternator output of 60 amps. Key improvements include transient spark calibration that increases torque by 5 to 7 percent for better acceleration, a revised gear ratio of 2.08:1 in the 4.8-inch gear case to boost torque, and four raw water pickups in the gear case nose cone allowing for higher engine mounting and greater trim flexibility. During testing with two people aboard and a full fuel tank, the Z18 reached a top speed of 60.2 miles per hour at wide open throttle using a 25-inch Fury 4-blade propeller. Cruising at 3,000 RPM yielded 25.7 miles per hour and 6.4 miles per gallon, providing a range of 231 statute miles with a 10% fuel reserve. The boat demonstrated quick acceleration, planing in 4.1 seconds, reaching 20 mph in 4.6 seconds, and 30 mph in 6.4 seconds. Handling was responsive with smooth sweeping turns at moderate speeds.
Exterior Design and Deck Layout
The Nitro Z18 features a beam of 7 feet 10 inches and provides ample deck space for fishing activities. Access to the boat is facilitated by a fold-up ladder located on the port side. The aft fishing deck measures 6 feet 7 inches by 2 feet 3 inches, offering generous casting room. Underneath the deck hatches are compartments housing the batteries, a 30-gallon divided live well, and dry storage with removable plastic tubs on either side. The forward fishing area spans 6 feet 7 inches wide at the aft section, tapering to 5 feet 2 inches forward, with a depth of 4 feet 2 inches at the forward aft area. This space includes a wastebasket and a 62-quart draining cooler that can be outfitted with an optional sandwich tray. Additional exterior features include four 4.5-inch pull-up cleats, cup holders, and tool racks mounted outboard on each side. The boat is equipped with a Minn Kota Maxim trolling motor delivering 70 pounds of thrust and controlled by a foot pedal, enhancing maneuverability in fishing scenarios. The Z18 is trailered on a single-axle unit with a swing-away tongue, carpeted bunks, and a motor support, making it a ready-to-use package.
Helm and Controls
The helm console is designed for ergonomic operation and comfort. It is topped with a windscreen and features an instrument panel centered around a 5-inch Lowrance Hook 5X fish finder. Flanking the fish finder are SmartKraft multifunction gauges, with the tachometer positioned to port and the speedometer to starboard. The steering wheel is mounted on a tilt hydraulic helm for adjustable driver comfort. The throttle and shift controls are conventional mechanical units, with a remote trim switch allowing the engine to be tilted up for trailering. The boat includes a master power switch adjacent to the ignition key that disables electrical power to accessories, preventing battery drain. Storage for fishing rods is conveniently located ahead of the companion seat on the port side, complemented by a rubber mat on the gunwale to protect reel finishes.
Additional Engine Features and Maintenance
The Mercury 150 Pro XS engine incorporates several practical design elements to enhance durability and ease of maintenance. The gear case includes low water pickups that facilitate higher engine installation and compatibility with jack plates, beneficial for navigating shallow waters. Engine mounts have been stiffened slightly to improve stability. The engine cowl features updated graphics and a streamlined profile. A maintenance decal is prominently displayed on the motor's side for quick reference. The alternator's 60-amp output is the highest among four-cylinder four-stroke engines, and the idle charge battery management system automatically increases idle speed to produce 20 amps when low battery voltage is detected, ensuring reliable battery maintenance.
Conclusion
The Nitro Z18 bass boat, equipped with Mercury's 150 Pro XS outboard, represents a well-rounded package for bass anglers who prioritize speed, torque, and functional fishing features. Its combination of advanced engine technology, efficient fuel consumption, responsive handling, and thoughtfully designed fishing spaces makes it a competitive choice in its class. The inclusion of standard equipment such as the Minn Kota trolling motor and a quality trailer further enhances its value as a turnkey fishing platform.
Overview from around the web 2022 Nitro Z18
Customers are praising the 2022 Nitro Z18 for its impressive performance on the water, spacious and comfortable layout, and high-quality build
Many appreciate its powerful engine options that deliver excellent speed and handling, making it ideal for both fishing and recreational boating. Users also highlight the thoughtful design features, such as ample storage, advanced electronics, and durable materials, which enhance the overall boating experience. Overall, the 2022 Nitro Z18 receives positive feedback for combining functionality, style, and reliability.
The Biggest Pros and Cons
The 2022 Nitro Z18 offers a range of features tailored for serious anglers, combining performance, comfort, and advanced technology. Here are some pros and cons to consider:
Pros
Powerful Performance: Equipped with a robust engine and advanced hull design, the Z18 delivers excellent speed and stability on various water conditions.
Spacious Deck Layout: The boat offers ample casting space, making it comfortable for multiple anglers to fish simultaneously.
High-Quality Construction: Built with durable materials, the Nitro Z18 ensures longevity and reliability.
Advanced Electronics: Comes with integrated fish-finding and navigation systems, enhancing the fishing experience.
Storage Capacity: Multiple storage compartments provide convenient space for gear and tackle.
Comfort Features: Ergonomic seating and convenient amenities make long days on the water more enjoyable.
Cons
Price Point: As a high-performance fishing boat, the Nitro Z18 may come with a higher price tag compared to entry-level models.
Size Limitations: While spacious for its class, the 18-foot length may be less suitable for very rough water conditions compared to larger boats.
Fuel Consumption: Powerful engines can lead to higher fuel use, which might be a consideration for extended trips.
Made For
The 2022 Nitro Z18 is designed for anglers who demand high performance and versatility on the water. Ideal for bass fishing enthusiasts, this boat offers a perfect blend of speed, stability, and advanced features to help you make the most of every fishing trip. Whether you're a competitive tournament fisherman or a weekend angler, the Nitro Z18 provides the power, technology, and comfort needed to elevate your fishing experience.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Want to update the details or images for this boat? Claim this listing by getting in touch.
Boat Location
Contact Bass Pro Boating Center | Sevierville, TN about 2022 Nitro Z18
3629 Outdoor Sportsmans Place, Kodak, TN, 37764
Login with Google