2019 Nitro Z18 Boat in Leesburg, FL 34748 US
Built in 2019
Z18
1 Engine (Mercury)
18.7 feet
Gas
Fiberglass/Reinforced
OPTIONS INCLUDE: Minn Kota Fortrex 24v 80lb, hot foot, keel guard, 3 bank on board battery charger, 6"manual jack plate, Helix 9" on bow and console, custom 14" wheels with spare.
America's best-selling fiberglass bass boat and the official boat of Major League Fishing®, The NITRO® Z18 is a champion from bow to stern. New for 2019, we've tweaked the design with an angled flush bow graph panel, more leg room under driver console and integrated net stow behind seats.
It's is based on our revolutionary NVT™ hull with Rapid Planing System™, giving you a smooth, soft and dry ride along with a brisk holeshot and precise handling when turning and at the top end. The interior of the Z18 is laid out to provide the ultimate in fishability, with Z-Core seating system with Force Flex suspension for the most comfortable ride possible.
- Length:18' 8"
- Length: 18' 8"
- Beam: 7' 10"
- Bottom width: 6' 3"
- Max. recommended HP: 175 HP
- Fuel capacity: 40 gal.
- Max. person capacity: 4 persons
- Max. person weight: 550 lbs.
- Max. person, motor & gear weight: 1350 lbs.
- Interior depth: 18.5"
- Transom height: 22.5"
- Deadrise: 16 degrees
- Draft: 15"
- Average dry weight: 1700 lbs.
- Average package weight: 3200 lbs.
- Package height: 6' 4"
- Package width: 8' 6"
- Towing length: 24' 1"
- Storage length: 21' 3"
Comfort, Convenience & Peace of Mind
- NMMA® certified
- Flotation meets or exceeds NMMA® & U.S. Coast Guard Requirements
- EPA-compliant fuel system
- Non-skid mats bow & stern
- 6 drink holders
- 4 stainless steel pull-up cleats
- Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
- 4 grab handles (1 at each seat)
- Fire extinguisher
- Horn
- Paddle
Console
- Extended leg room under console
- NEW Lowrance® HOOK2 5 Combo flush-mounted fishfinder
- Hydraulic steering w/tilt
- Removable acrylic, tinted windscreen
- Ready to accept optional removable port console
- Custom-molded modular console w/2-tone gelcoat
- Veethree® multifunction instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
- Dash light dimmer
- Water-resistant switch panels
- LED courtesy light
- 12V outlet
Construction & Exterior
- 100% composite deck core w/superior thermal stability & strength-to-weight ratio
- Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
- Gelcoated stringer/liner system
- Foam-filled hull for optimal buoyancy & safety
- Full-width fiberglass-encapsulated composite transom
- Low-profile gunnels to maximize deck size & for easier casting
Electrical
- NEW angled bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount 12" (30.5 cm) Humminbird® Helix™ 12 graph
- 1,000 GPH (3,785 LPH) bilge pump
- LED console courtesy light
- Automotive-style labeled fuse panel w/cover
- Interstate® 31M-AGM cranking battery
- 2 heavy-duty Interstate® Series 29 trolling batteries
- 2-bank, 8-amp battery charger w/exterior receptacle
- 6-gauge trolling motor wiring w/50-amp circuit breaker
- Master power switch
- Waterproof Deutsch plugin gauge connectors
- Water/abrasion-resistant connectors
Interior
- 34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility w/lots of storage
- Bike seat w/pedestal
- Folding fishing seat w/composite frame
- Z-Core™ seating system w/Force Flex suspension & contoured, rotomolded frame (driver & passenger seats)
- Trolling motor pedal recess for Minn Kota® & MotorGuide® trolling motors
- Port & starboard bow rod hold-down straps
- Molded-in drainage channels around bow storage compartments
- Oversized, lockable port & starboard bow rod lockers w/lift assists for rods up to 8' (2.44 m)
- Oversized lockable center bow storage locker
- Step to bow deck w/62-qt. (58.7 L) insulated cooler & removable trash receptacle
- Partner rod ramp w/rod handle organizer & hold-down strap
- Footrest w/non-skid mat under console(s)
- NEW designated net storage behind seating
- 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
- Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
- Insulated aluminum lids w/welded corners
- 16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
- Lockable compression latches
Livewell Systems
- Aft 30-gal. (114 L) Guardian™ aerated livewell w/divider & timer
- 500 GPH (1,893 LPH) livewell recirculation/pump-out system
- 500 GPH (1,893 LPH) aerator/fill pump
- Rotomolded w/rounded corners
Performance
- NITRO® Vortex Technology™ (NVT™) hull for a smoother, drier ride
- Rapid Planing System™ (RPS™) for quicker holeshots & maximized speed
- Rigging tube for organized wiring & abrasion resistance
- Stainless steel propeller
Trailer
- Custom-fit, single-axle NITRO® trailer w/powder-coat finish & GALVASHIELD® Impact corrosion & chip protection for improved durability
- 7-pin connector
- 14" (35.6 cm) chrome wheels w/radial tires
- No Touch Vortex hub lubrication system w/6-year, 100,000-mile limited warranty
- Spare tire carrier (spare tire avail. at additional cost)
- All-welded rectangular GALVASHIELD® frame
- Space-saving swing-away tongue to reduce storage length
- Heavy-duty winch w/nylon strap & bow safety strap
- Outboard motor support to reduce hull & transom stress while towing
- Carpeted bunks & fender boards to protect hull
- Submersible LED lights
- Safety cables
Trolling Motor
- Minn Kota® Maxxum® 24V, 70-lb. (31.8 kg) thrust, 42" (1.07 m) shaft, foot-control trolling motor
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 7/15/26 | Initial price | $24,995 |
2019 Nitro Z18 Video Tours
Nitro Z18: BoatTEST Review
Overview
The Nitro Z18 bass boat is an 18-foot 8-inch vessel designed for serious bass anglers seeking high performance and speed. Powered by Mercury's new 150 horsepower 3.0-liter inline 4 Pro XS 4-stroke outboard engine, the Z18 aims to deliver improved torque, acceleration, and overall efficiency compared to its predecessor, the Mercury 2-stroke Optimax. This review provides a comprehensive evaluation of the boat's performance, design, and features.
Power and Performance
The Mercury 150 Pro XS engine powering the Nitro Z18 is based on a 3.0-liter inline 4-cylinder block introduced in 2012 but features significant enhancements. It boasts the highest displacement and lowest weight in its class at 456 pounds, along with the highest alternator output of 60 amps. Key improvements include transient spark calibration that increases torque by 5 to 7 percent for better acceleration, a revised gear ratio of 2.08:1 in the 4.8-inch gear case to boost torque, and four raw water pickups in the gear case nose cone allowing for higher engine mounting and greater trim flexibility. During testing with two people aboard and a full fuel tank, the Z18 reached a top speed of 60.2 miles per hour at wide open throttle using a 25-inch Fury 4-blade propeller. Cruising at 3,000 RPM yielded 25.7 miles per hour and 6.4 miles per gallon, providing a range of 231 statute miles with a 10% fuel reserve. The boat demonstrated quick acceleration, planing in 4.1 seconds, reaching 20 mph in 4.6 seconds, and 30 mph in 6.4 seconds. Handling was responsive with smooth sweeping turns at moderate speeds.
Exterior Design and Deck Layout
The Nitro Z18 features a beam of 7 feet 10 inches and provides ample deck space for fishing activities. Access to the boat is facilitated by a fold-up ladder located on the port side. The aft fishing deck measures 6 feet 7 inches by 2 feet 3 inches, offering generous casting room. Underneath the deck hatches are compartments housing the batteries, a 30-gallon divided live well, and dry storage with removable plastic tubs on either side. The forward fishing area spans 6 feet 7 inches wide at the aft section, tapering to 5 feet 2 inches forward, with a depth of 4 feet 2 inches at the forward aft area. This space includes a wastebasket and a 62-quart draining cooler that can be outfitted with an optional sandwich tray. Additional exterior features include four 4.5-inch pull-up cleats, cup holders, and tool racks mounted outboard on each side. The boat is equipped with a Minn Kota Maxim trolling motor delivering 70 pounds of thrust and controlled by a foot pedal, enhancing maneuverability in fishing scenarios. The Z18 is trailered on a single-axle unit with a swing-away tongue, carpeted bunks, and a motor support, making it a ready-to-use package.
Helm and Controls
The helm console is designed for ergonomic operation and comfort. It is topped with a windscreen and features an instrument panel centered around a 5-inch Lowrance Hook 5X fish finder. Flanking the fish finder are SmartKraft multifunction gauges, with the tachometer positioned to port and the speedometer to starboard. The steering wheel is mounted on a tilt hydraulic helm for adjustable driver comfort. The throttle and shift controls are conventional mechanical units, with a remote trim switch allowing the engine to be tilted up for trailering. The boat includes a master power switch adjacent to the ignition key that disables electrical power to accessories, preventing battery drain. Storage for fishing rods is conveniently located ahead of the companion seat on the port side, complemented by a rubber mat on the gunwale to protect reel finishes.
Additional Engine Features and Maintenance
The Mercury 150 Pro XS engine incorporates several practical design elements to enhance durability and ease of maintenance. The gear case includes low water pickups that facilitate higher engine installation and compatibility with jack plates, beneficial for navigating shallow waters. Engine mounts have been stiffened slightly to improve stability. The engine cowl features updated graphics and a streamlined profile. A maintenance decal is prominently displayed on the motor's side for quick reference. The alternator's 60-amp output is the highest among four-cylinder four-stroke engines, and the idle charge battery management system automatically increases idle speed to produce 20 amps when low battery voltage is detected, ensuring reliable battery maintenance.
Conclusion
The Nitro Z18 bass boat, equipped with Mercury's 150 Pro XS outboard, represents a well-rounded package for bass anglers who prioritize speed, torque, and functional fishing features. Its combination of advanced engine technology, efficient fuel consumption, responsive handling, and thoughtfully designed fishing spaces makes it a competitive choice in its class. The inclusion of standard equipment such as the Minn Kota trolling motor and a quality trailer further enhances its value as a turnkey fishing platform.
Overview from around the web 2019 Nitro Z18
The 2019 Nitro Z18 has garnered positive feedback from many customers who appreciate its performance, versatility, and overall design
Users frequently highlight the boat's stability and smooth handling, making it a great choice for both freshwater fishing and recreational outings. The spacious layout is another point of praise, offering ample storage and comfortable seating that accommodates fishing gear and passengers alike. Customers often commend the boat's powerful engine options that deliver impressive speeds and quick acceleration, enhancing the overall fishing experience. The well-thought-out features, such as the large casting decks and high-quality rod storage, further elevate its functionality for serious anglers. Additionally, the Nitro Z18's build quality is noted for durability and attention to detail, reassuring owners of its longevity. Overall, those who have invested in the 2019 Nitro Z18 express satisfaction with its performance on the water and its ability to meet a variety of boating needs.
The Biggest Pros and Cons
Pros
Performance: The Nitro Z18 is known for its impressive speed and agility on the water, making it an excellent choice for anglers seeking a responsive and fun ride.
Storage Capacity: With ample storage compartments, including rod and tackle storage, this boat provides plenty of space to keep your gear organized and accessible.
Fishability: Equipped with features like fish finders, spacious casting decks, and livewells, the Z18 is designed with the serious angler in mind, enhancing your fishing experience.
Durability: Built with quality materials and construction techniques, the Nitro Z18 is designed to withstand the elements, ensuring longevity and reliability.
Value: Offering a solid blend of features and performance at a competitive price point, the Nitro Z18 provides great value for both novice and experienced boaters.
Cons
Weight: The Nitro Z18 can be heavier than some alternatives, which may affect towing and fuel efficiency for some users.
Limited Customization: While the Z18 comes well-equipped, some anglers may find the customization options more limited compared to higher-end models.
Ride Quality: Some users have noted that the ride quality can be a bit choppy in rough waters, which may not suit everyone’s preferences.
Basic Electronics: While functional, the standard electronics pack may feel basic for those looking for top-of-the-line tech features commonly found on premium models.
Restricted Speed: While it performs well, the Z18 may not reach the same top speeds as some larger bass boats, potentially impacting performance for competitive anglers.
Made For
The 2019 Nitro Z18 is designed for passionate anglers and boating enthusiasts who crave performance, versatility, and reliability on the water. Ideal for both seasoned pros and novices, this rugged bass boat caters to those who value a smooth ride and excellent handling, whether they're navigating freshwater lakes or rivers. With its spacious layout and ample storage, the Z18 provides plenty of room for gear, ensuring that every fishing trip is well-equipped. The boat’s upgraded features, including advanced fish-finding electronics and comfortable seating, make it perfect for long days on the water, whether you’re chasing tournament-winning bass or enjoying a relaxing day fishing with friends and family. The Nitro Z18 is also perfect for those who appreciate craftsmanship and durability, as it boasts a finely tuned hull design that enhances performance and efficiency. Experience the thrilling blend of speed, agility, and comfort that the 2019 Nitro Z18 has to offer, making it a top choice for anglers who are serious about their sport.
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Florida, United States Similar to the 2019 Nitro Z18
Compare with similar boats and find the perfect one for you.
 2019 Nitro Z18 | |||||
|---|---|---|---|---|---|
| $24,995 | $26,500 | $36,315 | $36,395 | $36,835 | $36,835 |
| Leesburg | Orlando | Leesburg | Fort Myers | Orlando | Gainesville |
| 19' | 19' | 17' | 17' | 17' | 17' |
| Mercury | Mercury | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE |
| 175 hp | - | 115 hp | 115 hp | 115 hp | 115 hp |
| 3 | 28 | 233 | 82 | 133 | 346 |
Other Nitro Z18 boats for sale in Florida, United States
Other Nitro boats for sale in Florida, United States
Meet the Broker
Address
Boat Location
Contact Nobles Marine about 2019 Nitro Z18
437 N. Palmetto St., Leesburg, FL, 34748
Login with Google