2018 Nitro Z18 Sold Boat in Leesburg, FL 34748 US
Built in 2018
Z18
1 Engine (Mercury)
18.7 feet
Gas
Fiberglass/Reinforced
Other 2018 Nitro Z18 For Sale in Florida, United States
Other Nitro Z18 boats for sale in Florida, United States
Other Nitro boats for sale in Florida, United States
OPTIONS INCLUDE: Garmin 9" and 7 at console, Garmin 12 on bow, Minn kota terrova 24v i pilot, docking lights, dual 10' power poles, spare tire and 3 step ladder on trailer.
America's best-selling fiberglass bass boat and the official boat of Major League Fishing®, The NITRO® Z18 is a champion from bow to stern. It's is based on our revolutionary NVT™ hull with Rapid Planing System™, giving you a smooth, soft and dry ride along with a brisk holeshot and precise handling when turning and at the top end. The interior of the Z18 is laid out to provide the ultimate in fishability, with all-new Z-Core seating system with Force Flex suspension for the most comfortable ride possible.
- Length:18' 8"
- Length: 18' 8"
- Beam: 94"
- Bottom width: 75"
- Max. recommended HP: 175 HP
- Fuel capacity: 40 gal.
- Max. person capacity: 4 persons
- Max. person weight: 550 lbs.
- Max. person, motor & gear weight: 1350 lbs.
- Interior depth: 18.5"
- Transom height: 22.5"
- Deadrise: 16 degrees
- Draft: 15"
- Average weight: 1700 lbs.
- Average package weight: 3200 lbs.
- Package height: 6' 4"
- Package width: 8' 6"
- Towing length: 24' 1"
- Storage length: 21' 3"
Comfort, Convenience & Peace of Mind
- NMMA® certified
- Flotation meets or exceeds NMMA® & U.S. Coast Guard Requirements
- EPA-compliant fuel system
- Non-skid mats bow & stern
- 6 drink holders
- 4 stainless steel pull-up cleats
- Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
- 4 grab handles (1 at each seat)
- Fire extinguisher
- Horn
- Paddle
Console
- Flush-mounted Lowrance® HOOK-5x fishfinder w/surface temperature & down imaging
- Hydraulic steering w/tilt
- Removable acrylic, tinted windscreen
- Ready to accept optional removable port console
- Custom-molded modular console w/2-tone gelcoat
- Veethree® multi-function instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
- Dash light dimmer
- Water-resistant switch panels
- LED courtesy light
- 12V outlet
Construction & Exterior
- NEW 100% composite deck core w/superior thermal stability & strength-to-weight ratio
- Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
- Gelcoated stringer/liner system
- Foam-filled hull for optimal buoyancy & safety
- Full-width fiberglass-encapsulated composite transom
- Low-profile gunnels to maximize deck size & for easier casting
Electrical
- Bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount 12" (30.5 cm) graph
- 1,000 GPH (3,785 LPH) bilge pump
- LED console courtesy light
- Bow navigation lights integrated into gunnels w/stowable stern light
- Automotive-style labeled fuse panel w/cover
- Interstate® 24M-RD cranking battery
- 2 heavy-duty Interstate® Series 29 trolling batteries
- 2-bank, 8-amp battery charger w/exterior receptacle
- 6-gauge trolling motor wiring w/50-amp circuit breaker
- Master power switch
- Waterproof Deutsch plugin gauge connectors
- Water/abrasion-resistant connectors
Interior
- NEW Z-Core seating system w/Force Flex suspension & contoured, rotomolded frame (driver & passenger seats)
- 34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility w/lots of storage
- Step-up to bow deck w/62-qt. (58.7 L) insulated cooler & removable trash receptacle
- Bike seat w/pedestal
- Folding fishing seat w/composite frame
- Trolling motor pedal recess for Minn Kota® & MotorGuide® trolling motors
- Oversized, lockable port & starboard bow rod lockers w/lift assists for rods up to 8' (2.44 m)
- Molded-in drainage channels around bow storage compartments
- Port & starboard bow rod hold-down straps
- Oversized lockable center bow storage locker
- Partner rod ramp w/rod handle organizer & hold-down strap
- 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
- Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
- 16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
- Lockable compression latches
- Footrest w/non-skid mat under console(s)
- Insulated aluminum lids w/welded corners
Livewell Systems
- Aft 30-gal. (114 L) Guardian™ aerated, divided livewell w/timer
- 500 GPH (1,893 LPH) livewell recirculation/pump-out system
- 500 GPH (1,893 LPH) aerator/fill pump
- Rotomolded w/rounded corners
Performance
- NITRO® Vortex Technology™ (NVT™) hull for a smoother, drier ride
- Rapid Planing System™ for quicker holeshots & maximized speed
- Rigging tube for organized wiring & abrasion resistance
- Stainless steel propeller
Trailer
- Custom-fit, single-axle NITRO® trailer w/powder-coat finish & GALVASHIELD® Impact corrosion & chip protection for improved durability
- 14" (35.6 cm) chrome wheels w/radial tires
- No Touch Vortex hub lubrication system w/6-yr. 100,000-mile limited warranty
- Spare tire carrier (spare tire avail. at additional cost)
- All-welded rectangular GALVASHIELD® frame
- Space-saving swing-away tongue to reduce storage length
- 1,200-lb. (544 kg) swing-up locking jack w/swivel wheel
- Heavy-duty winch w/nylon strap & bow safety strap
- Outboard motor support to reduce hull & transom stress while towing
- Carpeted bunks & fender boards to protect hull
- Submersible LED lights
- Safety cables
Trolling Motor
- Minn Kota® Maxxum® 24V, 70-lb. (31.8 kg) thrust, 42" (1.07 m) shaft foot-control trolling motor
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 12/18/25 | No change | $27,995 |
| 12/12/25 | Price decreased | $26,995(-3.6%) |
2018 Nitro Z18 Video Tours
Nitro Z18: BoatTEST Review
Overview
The Nitro Z18 bass boat is an 18-foot 8-inch vessel designed for serious bass anglers seeking high performance and speed. Powered by Mercury's new 150 horsepower 3.0-liter inline 4 Pro XS 4-stroke outboard engine, the Z18 aims to deliver improved torque, acceleration, and overall efficiency compared to its predecessor, the Mercury 2-stroke Optimax. This review provides a comprehensive evaluation of the boat's performance, design, and features.
Power and Performance
The Mercury 150 Pro XS engine powering the Nitro Z18 is based on a 3.0-liter inline 4-cylinder block introduced in 2012 but features significant enhancements. It boasts the highest displacement and lowest weight in its class at 456 pounds, along with the highest alternator output of 60 amps. Key improvements include transient spark calibration that increases torque by 5 to 7 percent for better acceleration, a revised gear ratio of 2.08:1 in the 4.8-inch gear case to boost torque, and four raw water pickups in the gear case nose cone allowing for higher engine mounting and greater trim flexibility. During testing with two people aboard and a full fuel tank, the Z18 reached a top speed of 60.2 miles per hour at wide open throttle using a 25-inch Fury 4-blade propeller. Cruising at 3,000 RPM yielded 25.7 miles per hour and 6.4 miles per gallon, providing a range of 231 statute miles with a 10% fuel reserve. The boat demonstrated quick acceleration, planing in 4.1 seconds, reaching 20 mph in 4.6 seconds, and 30 mph in 6.4 seconds. Handling was responsive with smooth sweeping turns at moderate speeds.
Exterior Design and Deck Layout
The Nitro Z18 features a beam of 7 feet 10 inches and provides ample deck space for fishing activities. Access to the boat is facilitated by a fold-up ladder located on the port side. The aft fishing deck measures 6 feet 7 inches by 2 feet 3 inches, offering generous casting room. Underneath the deck hatches are compartments housing the batteries, a 30-gallon divided live well, and dry storage with removable plastic tubs on either side. The forward fishing area spans 6 feet 7 inches wide at the aft section, tapering to 5 feet 2 inches forward, with a depth of 4 feet 2 inches at the forward aft area. This space includes a wastebasket and a 62-quart draining cooler that can be outfitted with an optional sandwich tray. Additional exterior features include four 4.5-inch pull-up cleats, cup holders, and tool racks mounted outboard on each side. The boat is equipped with a Minn Kota Maxim trolling motor delivering 70 pounds of thrust and controlled by a foot pedal, enhancing maneuverability in fishing scenarios. The Z18 is trailered on a single-axle unit with a swing-away tongue, carpeted bunks, and a motor support, making it a ready-to-use package.
Helm and Controls
The helm console is designed for ergonomic operation and comfort. It is topped with a windscreen and features an instrument panel centered around a 5-inch Lowrance Hook 5X fish finder. Flanking the fish finder are SmartKraft multifunction gauges, with the tachometer positioned to port and the speedometer to starboard. The steering wheel is mounted on a tilt hydraulic helm for adjustable driver comfort. The throttle and shift controls are conventional mechanical units, with a remote trim switch allowing the engine to be tilted up for trailering. The boat includes a master power switch adjacent to the ignition key that disables electrical power to accessories, preventing battery drain. Storage for fishing rods is conveniently located ahead of the companion seat on the port side, complemented by a rubber mat on the gunwale to protect reel finishes.
Additional Engine Features and Maintenance
The Mercury 150 Pro XS engine incorporates several practical design elements to enhance durability and ease of maintenance. The gear case includes low water pickups that facilitate higher engine installation and compatibility with jack plates, beneficial for navigating shallow waters. Engine mounts have been stiffened slightly to improve stability. The engine cowl features updated graphics and a streamlined profile. A maintenance decal is prominently displayed on the motor's side for quick reference. The alternator's 60-amp output is the highest among four-cylinder four-stroke engines, and the idle charge battery management system automatically increases idle speed to produce 20 amps when low battery voltage is detected, ensuring reliable battery maintenance.
Conclusion
The Nitro Z18 bass boat, equipped with Mercury's 150 Pro XS outboard, represents a well-rounded package for bass anglers who prioritize speed, torque, and functional fishing features. Its combination of advanced engine technology, efficient fuel consumption, responsive handling, and thoughtfully designed fishing spaces makes it a competitive choice in its class. The inclusion of standard equipment such as the Minn Kota trolling motor and a quality trailer further enhances its value as a turnkey fishing platform.
Overview from around the web 2018 Nitro Z18
Customers are praising the 2018 Nitro Z18 for its impressive blend of performance and versatility
Many highlight its powerful engine options that deliver excellent speed and smooth handling on the water. The spacious and well-designed deck layout receives positive feedback for providing ample room for fishing and comfort during long days out. Anglers appreciate the quality construction and thoughtful storage solutions that keep gear organized and accessible. Overall, the 2018 Nitro Z18 is recognized for its reliability, responsiveness, and ability to meet the needs of both serious fishermen and recreational boaters alike.
The Biggest Pros and Cons
The 2018 Nitro Z18 is a versatile bass boat designed to deliver strong performance on the water. Here are some of its pros and cons:
Pros
Powerful Performance: Equipped with a reliable outboard engine, the Z18 offers excellent speed and acceleration for quick access to prime fishing spots.
Spacious Layout: The boat features a roomy deck with ample storage compartments, providing plenty of space for gear and comfortable movement while fishing.
Quality Construction: Built with durable materials and a solid hull design, the Z18 ensures stability and longevity on various water conditions.
Advanced Electronics: Often comes with integrated fish finder and GPS options, enhancing the fishing experience with modern technology.
Comfort Features: Includes comfortable seating and ergonomic controls, making long days on the water more enjoyable.
Cons
Limited Seating Capacity: While spacious for fishing, the seating is typically designed to accommodate fewer passengers, which may not be ideal for larger groups.
Fuel Efficiency: Depending on the engine size and usage, fuel consumption can be higher compared to smaller or less powerful boats.
Price Point: As a well-equipped fishing boat, the Z18 may come at a higher cost, which might be a consideration for budget-conscious buyers.
Storage Accessibility: Some users find that while storage is ample, certain compartments can be less accessible depending on the layout and gear arrangement.
Made For
The 2018 Nitro Z18 is designed for avid anglers who demand high performance and versatility on the water. Whether you're a tournament fisherman looking for speed and precision or a weekend angler seeking a reliable and comfortable boat for exploring lakes and rivers, the Z18 offers the perfect blend of power, advanced features, and durability. Its spacious deck and ample storage make it ideal for those who want to spend long days fishing with all their gear organized and within reach.
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Want to update the details or images for this boat? Claim this listing by getting in touch.
Boat Location
Contact Nobles Marine about 2018 Nitro Z18
437 N. Palmetto St., Leesburg, FL, 34748
Login with Google