2011 Nitro Z-7
$14,995
Boat in Leeds, AL 35094 US
Built in 2011
Z-7
1 Engine (Mercury)
18.7 feet
Gas
Fiberglass/Reinforced
- Rapid Planing System transom
- Ready to accept optional removable port console
- Fold-down reboarding ladder
- 34-gal. (128.70 L) divided, aerated aft livewell w/recirculator, timer & pump-out system
- 3-across seating w/steps to aft deck & helm & buddy suspension systems
- 2 rod lockers & center bow storage locker w/power lid assists
- Easy-to-read instrumentation & tinted windscreen
- Flush-mounted Lowrance Mark-5x fishfinder
- Step to bow deck w/cooler & trash receptacle
- Bow bicycle seat & aft folding chair
- MotorGuide 24V, 70-lb. thrust foot-controlled trolling motor
- Custom-matched trailer w/GALVASHIELD corrosion protection, swing-away tongue & EZ lube hubs
There's absolutely nothing entry level about the NITRO Z-7. Instead, this midsize bass boat sports 18' 8" (5.69 m) of pure tournament fishing performance.
To start, it's crafted with the ingenius Rapid Planing System transom for extreme shallow-water performance, faster planing and higher top-end speeds. This system is perfectly integrated with the already famous NITRO hull design to provide unheard-of maneuverability and handling in some of the roughest conditions.
Inside, the Z-7 is just as impressive with huge amounts of casting space, as well as storage for rods up to 8' (2.44 m) long. There's also a powerful MotorGuide foot-controlled trolling motor, Lowrance 480x480-pixel fishfinder (with surface temperature) and even molded storage boxes with tackle tray holders!
- Length: 18' 8"
- Max. Recommended HP: 200 HP
- Package Width: 8' 6"
- Fuel Capacity: 45 Gallons
- Deadrise: 16 degrees
- Draft: 15"
- Beam: 94"
- Weight (approx.): 1650 Lbs.
- Package Weight (approx.): 3000 Lbs.
- Max. Person Capacity: 4 Persons
- Pkg Length w/ Swing-Away: 21' 9"
- Transom Height: 22.5"
- Max. Weight Capacity: 1390 Lbs.
- Max. Person Weight: 600 Lbs.
Comfort, Safety & Convenience
- Passenger grab handle
- Navigation lights
- 4 pull-out cleats
- Drink holders
- 2 molded-in steps for sure-footed, easy access to aft deck
- Paddle
- Flotation meets or exceeds NMMA & U.S. Coast Guard requirements
- Integrated fold-down reboarding ladder
- Non-skid bow mat
- 5 stainless steel drink holders
Construction
- Hand-laid hull
- Fiberglass foam-filled stringer system
- Composite transom
- Rapid Planing System transom
- Modular console(s) for maximum interior room & hull strength
- Marine-grade cut-pile carpet w/edging
Custom/Performance
- Rigging tube
Dash/Console
- Ready to accept optional removable port console
- Dash light dimmer switch
- Recess for optional Hot Foot pedal
- Modular console(s) for maximum interior room & hull strength
- Full instrumentation w/speedometer, tachometer, voltmeter, fuel gauge, water pressure gauge & trim gauge
- Dual-cable rotary steering
- Flush-mounted fishfinder
- Molded, tinted windscreen
Electrical
- Navigation lights
- Bow panel w/trolling motor receptacle, anchor light switch, trim switch & room for additional depth finder
- 2 Interstate® trolling batteries
- 2-bank, 4-amp battery charger
- 1,000 GPH (3,785.41 LPH) bilge pump
Electronics
- Flush-mounted Lowrance® Mark-5x fishfinder w/480x480 pixel display & surface temperature
Interior
- Oversized center bow storage box w/tackle tray organizers
- Oversized port & starboard bow rod lockers w/lid assists for rods up to 8' (2.44 m)
- Port & starboard bow rod hold-down straps
- Helm & buddy seats w/suspension systems
- Elevated fore & aft casting decks
- Bike seat w/pedestal
- Insulated aluminum lids w/welded corners
- Step to bow deck w/cooler & trash receptacle
- Fold-down fishing seat w/composite frame
- Lift-out, molded aft storage boxes accept tackle trays
- Trolling motor pedal recess for MotorGuide® & Minn Kota® trolling motors
- Passenger rod holder
- Modular console
Livewell Systems
- 500 GPH (1,892.71 LPH) aerator/fill pump
- 500 GPH (1,892.71 LPH) recirculating pump
- 32-gal. (121.13 L) aerated, recirculated aft livewell w/timer
- Rotomolded w/rounded corners
- Pump-out system
Trailer
- Color-coordinated, single-axle drive-on NITRO trailer
- EZ lube hubs
- Folding tongue jack w/swivel wheel
- Powder-coat finish
- Retractable safety cables
- Submersible lights
- GALVASHIELD® corrosion protection
- Tie downs
- Non-skid fender pads
- Transom saver
- Carpeted bunks
Trolling Motor
- MotorGuide® 24V, 70-lb. thrust, 45" (1.14 m) shaft, foot-controlled trolling motor
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
Price History
| Date | Event | Price |
|---|---|---|
| 5/30/26 | Initial price | $14,995 |
Boattest.com Review
Overview
The Nitro Z7 is a versatile bass boat designed to deliver both performance and comfort for serious anglers. Measuring 18 feet 8 inches in length overall with a 94-inch beam and a shallow 15-inch draft, the Z7 is capable of accessing skinny water with ease. It features a 16-degree variable dead rise hull and is offered with a standard 150 horsepower Mercury Pro XS outboard, rated up to 175 horsepower, providing a balance of power and efficiency. The boat is available in single or dual console configurations, with the dual console being easily removable to suit different fishing preferences.
Fishing Features and Deck Layout
The Z7 offers spacious casting decks at both the bow and stern, allowing anglers to move freely even with pedestal seats installed. These seats are positioned at a comfortable height and are supported by gas struts for ease of use. Central to the deck is a 32-gallon aerated and divided livewell equipped with a 500-gallon Brouwer recirculating pump and an aerator timer, featuring rounded corners for improved water flow. Courtesy lights are conveniently controlled directly at the light fixtures, eliminating the need to search for switches at the helm. The foredeck houses a recessed well for the foot control of the standard Minn Kota 42-inch shaft trolling motor, which delivers 70 pounds of thrust and includes a directional arrow for intuitive heading control. Optional trolling motors with shafts up to 52 inches and thrusts up to 80 pounds are also available. Rod storage is ample, with lockable compartments beside the passenger seat and under the forward casting deck, capable of holding rods up to eight feet. Bungee cords at the bow secure rods during transit. Additional removable storage bins flank the aft casting deck, complemented by an insulated cooler and a trash receptacle with molded finger cutouts for easy handling. The foredeck also features dedicated dry storage and a designated spot for the navigation light.
Operational Features and Helm
The Z7’s helm is thoughtfully designed for both comfort and functionality. It includes three-across seating with steps between seats, an improvement over previous models that required stepping on a folded center seat. The helm panel features a master power switch and white-faced gauges with chrome bezels, including a standard Lowrance Mark V FX Pro fishfinder. Rocker switches for the livewell aerator and recirculating pump are conveniently located to the right of the leather-wrapped, tilt-mounted three-spoke steering wheel. Flip-up cleats reduce snag hazards, and a reboarding step is positioned on the port side. The wiring harness is neatly channeled to the Mercury Optimax engine, with onboard storage for three batteries and the oil tank, which can be optionally equipped with a remote fill system. The dual console option can be removed via three attachment points, providing flexibility in layout.
Power and Performance
Powered by a 150 horsepower Mercury Pro XS outboard, the Nitro Z7 demonstrated impressive performance during testing. With an estimated test weight of 2,624 pounds, including half fuel and two passengers, the boat reached a top speed of 62 miles per hour at 5,600 RPM, consuming 13.75 gallons per hour for a range of approximately 166 miles. Its optimal cruise speed was identified at 28.4 miles per hour at 3,000 RPM, reducing fuel burn to 3.9 gallons per hour and extending range to 268 miles over 9.5 hours. The rapid planing system enabled a quick time to plane of 3.3 seconds, with acceleration milestones of 20 mph in 5 seconds, 30 mph in 7.4 seconds, 40 mph in 11.6 seconds, and 50 mph in 17.5 seconds. The boat exhibits a 10-degree bow rise during acceleration, which can be trimmed to achieve a smooth running pad with minimal spray. The hull’s design minimizes chine walking at high speeds, even in choppy conditions, with responsive steering allowing quick corrections. The windscreen effectively deflects wind off the operator’s face, although removing the port console increases cockpit space at the expense of wind protection for the passenger.
Conclusion
The Nitro Z7 stands out as a well-built, comfortable, and highly maneuverable bass boat. Its combination of thoughtful fishing features, efficient powertrain, and refined handling make it a strong contender in its class. The boat’s aesthetic appeal is enhanced by multiple standard and optional color packages, and it comes standard with a powder-coated, color-matched single-axle trailer equipped with 14-inch wheels. Overall, the Z7 offers anglers a capable platform that balances performance with practical fishing amenities.
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Alabama, United States Similar to the 2011 Nitro Z-7
Compare with similar boats and find the perfect one for you.
 2011 Nitro Z-7 | |||||
|---|---|---|---|---|---|
| $14,995 | $18,000 | $35,020 | $35,305 | $36,220 | $43,995 |
| Leeds | Fairhope | Florence | Sylacauga | Prattville | Sylacauga |
| 19' | 19' | 17' | 17' | 17' | 21' |
| Mercury | Mercury | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | Mercury |
| 150 hp | 150 hp | 115 hp | 115 hp | 115 hp | 250 hp |
| 1 | 40 | 192 | 82 | 28 | 24 |
Other Nitro Z-7 boats for sale in Alabama, United States
Other Nitro boats for sale in Alabama, United States
Meet the Broker
Address
Boat Location
Contact Bass Pro Boating Center | Leeds, AL about 2011 Nitro Z-7
5000 Bass Pro Blvd., Leeds, AL, 35094
Login with Google