This boat has been sold but check out these similar boats nearby

2010 Nitro Z-7 Sold Boat in Yantis, TX 75497 US

$16,000

Used
We will let you know when another 2010 Nitro Z-7 is available in Yantis, TX
builtBuilt in 2010
Year the boat was built
model

Z-7

Boat model
engine

1 Engine (Mercury)

Engine type and count
length

18.7 feet

Overall boat length
fuel

Gas

Fuel type
material

Fiberglass/Reinforced

Hull material

Boats For Sale in Texas, United States Similar to the 2010 Nitro Z-7

Compare with similar boats and find the perfect one for you.

This Boat
Similar Boats
 
The Image of Nitro Z-7 2010 - 02010 Nitro Z-7
Price$16,000$15,988$15,977$15,900$16,977$16,995
LocationYantisLewisvilleGrand PrairieAustinGrand PrairieLufkin
Nominal Length19'-17'19'17'18'
Engine MakeMercuryYamaha-Mercury--
Total Engine Power150 hp70 hp-115 hp--
Days on Market2993322663597
Get in touch

Other Nitro Z-7 boats for sale in Texas, United States

Nominal Length
18.67ft
Length Overall
19ft
Beam
7.83ft
Dry Weight
1650lb
Max Capacity
1390
Seating Capacity
4
Fuel Tanks
45gal
Hull Material
fiberglass
Hull Shape
modified-vee
Engine 1
Engine Make
Mercury
Total Power
150hp
Engine Hours
88
Engine Type
outboard-2s
Fuel Type
gasoline
Propeller Type
3-blade
Propeller Material
stainless-steel
Additional Details
  • Length: 18' 8"
  • Beam: 94"
  • Transom Height: 22.5"
  • Max. Recommended HP: 200 HP
  • Max. Person Capacity: 4 Persons
  • Max. Person Weight: 600 Lbs.
  • Max. Weight Capacity: 1390 Lbs.
  • Weight (approx.): 1650 Lbs.
  • Fuel Capacity: 45 Gallons
  • Pkg Length w/ Swing-Away: 21' 9"
  • Package Width: 8' 6"
  • Package Weight (approx.): 3000 Lbs.
  • Deadrise: 16 degrees
  • Draft: 15"
Standard Features

Comfort, Safety & Convenience

  • 4 pull-out cleats
  • Navigation lights
  • Passenger grab handle
  • 2 molded-in steps for sure-footed, easy access to aft deck
  • Flotation meets or exceeds NMMA & U.S. Coast Guard requirements
  • Paddle
  • Exclusive integrated fold-down reboarding ladder
  • Non-skid bow mat
  • 5 stainless steel drink holders

Construction

  • Hand-laid hull
  • Fiberglass foam-filled stringer system
  • Composite transom
  • Modular console(s) for maximum interior room & hull strength
  • Anti-splash, reverse-flow transom
  • Marine-grade cut-pile carpet

Custom/Performance

  • Rigging tube

Dash/Console

  • Full instrumentation w/speedometer, tachometer, voltmeter, fuel gauge, water pressure gauge & trim gauge
  • Dual-cable rotary steering
  • Sport gauges w/white faces & chrome bezels
  • Flush-mounted fish finder In console
  • Molded, tinted plexiglass windshield

Electrical

  • Navigation lights
  • Bow panel w/trolling motor receptacle, anchor light switch, trim switch & room for additional depth finder
  • 2 Interstate trolling batteries
  • On-board battery charger
  • 1,000 GPH (3,785.41 LPH) bilge pump
  • Interstate cranking battery

Electronics

  • Lowrance Hook 9 HDI
  • Motor Guide  Pro Series 70lb Trolling Motor

Interior

  • Elevated casting decks
  • Bike seat
  • Bow deck step-up cooler & trash receptacle
  • Fold-down fishing seat w/composite frame
  • Lift-out, molded aft storage boxes accept Plano 3700 tackle trays
  • Oversized center bow storage box
  • Oversized port & starboard rod boxes
  • Insulated aluminum lids w/welded corners
  • Trolling motor pedal recess for MotorGuide & Minn Kota trolling motors
  • Passenger rod holder
  • New high performance upholstery design
  • Modular console

Livewell Systems

  • 500 GPH (1,892.71 LPH) aerator/fill pump
  • 750 GPH (1,892.71 LPH) recirculating pump
  • 34-gal. (128.70 L) aerated, recirculated aft livewell w/timer
  • Rotomolded w/rounded corners
  • Pump-out system

Trailer

  • Color-coordinated, single-axle drive-on NITRO trailer
  • EZ lube hubs
  • 14" (35.56 cm) tires w/chrome wheel covers
  • Powder-coat finish
  • Folding tongue jack w/swivel wheel
  • Submersible lights
  • Transom saver
  • GalvaShield corrosion protection
  • Tie downs
  • Retractable safety cables
  • Welded tubular frame
  • Winch strap w/safety strap
  • Non-skid fender pads
  • Swing-away tongue
  • Carpeted bunks

Trolling Motor

  • MotorGuide 24V, 70-lb. thrust, 45" (1.14 m) shaft, foot-controlled trolling motor
Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Price History

DateEventPrice
11/15/25Initial price$16,000

Contact Sartin Marine, Inc

290 Farm Road 1567 West, Lake Fork, TX, 75497

Nitro Z-7: BoatTEST Review

Reviewed by Jeff Hammond

Overview

The Nitro Z7 is a versatile bass boat designed to deliver both performance and comfort for serious anglers. Measuring 18 feet 8 inches in length overall with a 94-inch beam and a shallow 15-inch draft, the Z7 is capable of accessing skinny water with ease. It features a 16-degree variable dead rise hull and is offered with a standard 150 horsepower Mercury Pro XS outboard, rated up to 175 horsepower, providing a balance of power and efficiency. The boat is available in single or dual console configurations, with the dual console being easily removable to suit different fishing preferences.

Fishing Features and Deck Layout

The Z7 offers spacious casting decks at both the bow and stern, allowing anglers to move freely even with pedestal seats installed. These seats are positioned at a comfortable height and are supported by gas struts for ease of use. Central to the deck is a 32-gallon aerated and divided livewell equipped with a 500-gallon Brouwer recirculating pump and an aerator timer, featuring rounded corners for improved water flow. Courtesy lights are conveniently controlled directly at the light fixtures, eliminating the need to search for switches at the helm. The foredeck houses a recessed well for the foot control of the standard Minn Kota 42-inch shaft trolling motor, which delivers 70 pounds of thrust and includes a directional arrow for intuitive heading control. Optional trolling motors with shafts up to 52 inches and thrusts up to 80 pounds are also available. Rod storage is ample, with lockable compartments beside the passenger seat and under the forward casting deck, capable of holding rods up to eight feet. Bungee cords at the bow secure rods during transit. Additional removable storage bins flank the aft casting deck, complemented by an insulated cooler and a trash receptacle with molded finger cutouts for easy handling. The foredeck also features dedicated dry storage and a designated spot for the navigation light.

Operational Features and Helm

The Z7’s helm is thoughtfully designed for both comfort and functionality. It includes three-across seating with steps between seats, an improvement over previous models that required stepping on a folded center seat. The helm panel features a master power switch and white-faced gauges with chrome bezels, including a standard Lowrance Mark V FX Pro fishfinder. Rocker switches for the livewell aerator and recirculating pump are conveniently located to the right of the leather-wrapped, tilt-mounted three-spoke steering wheel. Flip-up cleats reduce snag hazards, and a reboarding step is positioned on the port side. The wiring harness is neatly channeled to the Mercury Optimax engine, with onboard storage for three batteries and the oil tank, which can be optionally equipped with a remote fill system. The dual console option can be removed via three attachment points, providing flexibility in layout.

Power and Performance

Powered by a 150 horsepower Mercury Pro XS outboard, the Nitro Z7 demonstrated impressive performance during testing. With an estimated test weight of 2,624 pounds, including half fuel and two passengers, the boat reached a top speed of 62 miles per hour at 5,600 RPM, consuming 13.75 gallons per hour for a range of approximately 166 miles. Its optimal cruise speed was identified at 28.4 miles per hour at 3,000 RPM, reducing fuel burn to 3.9 gallons per hour and extending range to 268 miles over 9.5 hours. The rapid planing system enabled a quick time to plane of 3.3 seconds, with acceleration milestones of 20 mph in 5 seconds, 30 mph in 7.4 seconds, 40 mph in 11.6 seconds, and 50 mph in 17.5 seconds. The boat exhibits a 10-degree bow rise during acceleration, which can be trimmed to achieve a smooth running pad with minimal spray. The hull’s design minimizes chine walking at high speeds, even in choppy conditions, with responsive steering allowing quick corrections. The windscreen effectively deflects wind off the operator’s face, although removing the port console increases cockpit space at the expense of wind protection for the passenger.

Conclusion

The Nitro Z7 stands out as a well-built, comfortable, and highly maneuverable bass boat. Its combination of thoughtful fishing features, efficient powertrain, and refined handling make it a strong contender in its class. The boat’s aesthetic appeal is enhanced by multiple standard and optional color packages, and it comes standard with a powder-coated, color-matched single-axle trailer equipped with 14-inch wheels. Overall, the Z7 offers anglers a capable platform that balances performance with practical fishing amenities.

Rating: 4.4 out of 5

Overview from around the web 2010 Nitro Z-7

Customers praise the 2010 Nitro Z-7 for its exceptional performance and versatility on the water

Many highlight its sturdy construction and smooth handling, making it ideal for both fishing and recreational boating. Users appreciate the spacious layout that provides ample storage and comfort during long days on the lake. The boat's powerful engine options and advanced features contribute to an enjoyable and reliable experience, making the Nitro Z-7 a popular choice among anglers and boating enthusiasts alike.

The Biggest Pros and Cons

The 2010 Nitro Z-7 is a popular fishing boat known for its performance and features. Here are some of the pros and cons to consider:

Pros

Powerful Performance: Equipped with a reliable outboard engine, the Nitro Z-7 offers strong acceleration and excellent speed on the water.

Spacious Deck: The boat provides ample casting space, making it ideal for anglers who need room to move and fish comfortably.

Quality Construction: Built with durable materials and attention to detail, the Z-7 is designed to withstand various fishing conditions.

Multiple Storage Compartments: Offers plenty of storage for gear, tackle, and equipment, helping to keep the deck organized.

Comfort Features: Includes comfortable seating and ergonomic controls, enhancing the overall boating experience.

Cons

Fuel Efficiency: Due to its powerful engine, the Z-7 may consume more fuel compared to smaller or less powerful fishing boats.

Limited Seating Capacity: While spacious for fishing, the seating is primarily designed for anglers, which might limit passenger comfort on longer trips.

Weight: The boat’s sturdy construction adds weight, which can affect towing requirements and trailer considerations.

Basic Electronics (depending on trim): Some models may come with limited electronic features, requiring upgrades for advanced navigation or fish-finding technology.

Made For

The 2010 Nitro Z-7 is perfect for anglers who demand a versatile and high-performance bass boat. It’s designed for serious fishing enthusiasts who want a reliable, durable, and well-equipped vessel that performs excellently in both calm lakes and challenging river conditions. Whether you’re a weekend angler or a competitive fisherman, the Z-7 offers the speed, stability, and advanced features needed to enhance your fishing experience.

Be the first to know when similar boats hit the market

Get notified when new boats become available

Meet the Broker

Address

290 Farm Road 1567 West
Lake Fork, TX 75497

Want to update the details or images for this boat? Claim this listing by getting in touch.

Boat Location

Be the First to Know

Get notified when new boats become available.