2010 Nitro Z-7 Sold Boat in Longview, TX 75602 US
Built in 2010
Z-7
1 Engine (Mercury)
18.7 feet
Gas
Fiberglass/Reinforced
Boats For Sale in Texas, United States Similar to the 2010 Nitro Z-7
Compare with similar boats and find the perfect one for you.
 2010 Nitro Z-7 | ||||||
|---|---|---|---|---|---|---|
| Price | $12,599 | $12,990 | $12,990 | $12,995 | $11,995 | $11,995 |
| Location | Longview | Breckenridge | Breckenridge | Laredo | Austin | Lufkin |
| Nominal Length | 19' | 21' | 21' | 18' | 21' | 17' |
| Engine Make | Mercury | - | - | MERCURY | MERCURY | - |
| Total Engine Power | 150 hp | 225 hp | - | 115 hp | 250 hp | - |
| Days on Market | 329 | 16 | 90 | 55 | 14 | 56 |
| Get in touch |
Other Nitro Z-7 boats for sale in Texas, United States
Other Nitro boats for sale in Texas, United States
There's a MotorGuide trolling motor that's quiet yet will easily pull you through the current. The low-profile hull design keeps you right next to the action. And the Lowrance fish finder, storage, trailer and Mercury outboard motor finish it all off nicely. The NITRO Z-7 is everything you need to make some serious waves in one easy-to-handle bass fishing package.
Features:
- Rapid Planing System transom
- Removable dual console option
- Fold-down reboarding ladder
- 34-gal. (128.70 L) divided, aerated aft livewell w/recirculator, timer & pump-out system
- 3-across seating w/steps to aft deck
- 2 rod lockers & center bow storage locker w/power lid assists
- Easy-to-read instrumentation & tinted windscreen
- In-dash Lowrance X96 TX fish finder
- Step to bow deck w/cooler & trash receptacle
- Bow bicycle seat & aft folding chair
- MotorGuide 24V, 70-lb. thrust foot-controlled trolling motor
- Custom-matched trailer w/GalvaShield corrosion protection, swing-away tongue & EZ lube hubs
- Length: 18' 8"
- Beam: 94"
- Transom Height: 22.5"
- Max. Recommended HP: 200 HP
- Max. Person Capacity: 4 Persons
- Max. Person Weight: 600 Lbs.
- Max. Weight Capacity: 1390 Lbs.
- Weight (approx.): 1650 Lbs.
- Fuel Capacity: 45 Gallons
- Pkg Length w/ Swing-Away: 21' 9"
- Package Width: 8' 6"
- Package Weight (approx.): 3000 Lbs.
- Deadrise: 16 degrees
- Draft: 15"
- 4 pull-out cleats
- Navigation lights
- Passenger grab handle
- 2 molded-in steps for sure-footed, easy access to aft deck
- Flotation meets or exceeds NMMA & U.S. Coast Guard requirements
- Paddle
- Exclusive integrated fold-down reboarding ladder
- Non-skid bow mat
- 5 stainless steel drink holders
- Hand-laid hull
- Fiberglass foam-filled stringer system
- Composite transom
- Modular console(s) for maximum interior room & hull strength
- Anti-splash, reverse-flow transom
- Marine-grade cut-pile carpet
- Rigging tube
- Full instrumentation w/speedometer, tachometer, voltmeter, fuel gauge, water pressure gauge & trim gauge
- Dual-cable rotary steering
- Sport gauges w/white faces & chrome bezels
- Flush-mounted fish finder In console
- Molded, tinted plexiglass windshield
- Navigation lights
- Bow panel w/trolling motor receptacle, anchor light switch, trim switch & room for additional depth finder
- 2 Interstate trolling batteries
- On-board battery charger
- 1,000 GPH (3,785.41 LPH) bilge pump
- Interstate cranking battery
- Lowrance X96 TX fish finder w/320 pixels & surface temperature
- Elevated casting decks
- Bike seat
- Bow deck step-up cooler & trash receptacle
- Fold-down fishing seat w/composite frame
- Lift-out, molded aft storage boxes accept Plano 3700 tackle trays
- Oversized center bow storage box
- Oversized port & starboard rod boxes
- Insulated aluminum lids w/welded corners
- Trolling motor pedal recess for MotorGuide & Minn Kota trolling motors
- Passenger rod holder
- New high performance upholstery design
- Modular console
- 500 GPH (1,892.71 LPH) aerator/fill pump
- 750 GPH (1,892.71 LPH) recirculating pump
- 34-gal. (128.70 L) aerated, recirculated aft livewell w/timer
- Rotomolded w/rounded corners
- Pump-out system
- Color-coordinated, single-axle drive-on NITRO trailer
- EZ lube hubs
- 14" (35.56 cm) tires w/chrome wheel covers
- Powder-coat finish
- Folding tongue jack w/swivel wheel
- Submersible lights
- Transom saver
- GalvaShield corrosion protection
- Tie downs
- Retractable safety cables
- Welded tubular frame
- Winch strap w/safety strap
- Non-skid fender pads
- Swing-away tongue
- Carpeted bunks
- MotorGuide 24V, 70-lb. thrust, 45" (1.14 m) shaft, foot-controlled trolling motor
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
Price History
| Date | Event | Price |
|---|---|---|
| 10/17/25 | Initial price | $12,599 |
2010 Nitro Z-7 Video Tours
Nitro Z-7: BoatTEST Review
Overview
The Nitro Z7 is a versatile bass boat designed to deliver both performance and comfort for serious anglers. Measuring 18 feet 8 inches in length overall with a 94-inch beam and a shallow 15-inch draft, the Z7 is capable of accessing skinny water with ease. It features a 16-degree variable dead rise hull and is offered with a standard 150 horsepower Mercury Pro XS outboard, rated up to 175 horsepower, providing a balance of power and efficiency. The boat is available in single or dual console configurations, with the dual console being easily removable to suit different fishing preferences.
Fishing Features and Deck Layout
The Z7 offers spacious casting decks at both the bow and stern, allowing anglers to move freely even with pedestal seats installed. These seats are positioned at a comfortable height and are supported by gas struts for ease of use. Central to the deck is a 32-gallon aerated and divided livewell equipped with a 500-gallon Brouwer recirculating pump and an aerator timer, featuring rounded corners for improved water flow. Courtesy lights are conveniently controlled directly at the light fixtures, eliminating the need to search for switches at the helm. The foredeck houses a recessed well for the foot control of the standard Minn Kota 42-inch shaft trolling motor, which delivers 70 pounds of thrust and includes a directional arrow for intuitive heading control. Optional trolling motors with shafts up to 52 inches and thrusts up to 80 pounds are also available. Rod storage is ample, with lockable compartments beside the passenger seat and under the forward casting deck, capable of holding rods up to eight feet. Bungee cords at the bow secure rods during transit. Additional removable storage bins flank the aft casting deck, complemented by an insulated cooler and a trash receptacle with molded finger cutouts for easy handling. The foredeck also features dedicated dry storage and a designated spot for the navigation light.
Operational Features and Helm
The Z7’s helm is thoughtfully designed for both comfort and functionality. It includes three-across seating with steps between seats, an improvement over previous models that required stepping on a folded center seat. The helm panel features a master power switch and white-faced gauges with chrome bezels, including a standard Lowrance Mark V FX Pro fishfinder. Rocker switches for the livewell aerator and recirculating pump are conveniently located to the right of the leather-wrapped, tilt-mounted three-spoke steering wheel. Flip-up cleats reduce snag hazards, and a reboarding step is positioned on the port side. The wiring harness is neatly channeled to the Mercury Optimax engine, with onboard storage for three batteries and the oil tank, which can be optionally equipped with a remote fill system. The dual console option can be removed via three attachment points, providing flexibility in layout.
Power and Performance
Powered by a 150 horsepower Mercury Pro XS outboard, the Nitro Z7 demonstrated impressive performance during testing. With an estimated test weight of 2,624 pounds, including half fuel and two passengers, the boat reached a top speed of 62 miles per hour at 5,600 RPM, consuming 13.75 gallons per hour for a range of approximately 166 miles. Its optimal cruise speed was identified at 28.4 miles per hour at 3,000 RPM, reducing fuel burn to 3.9 gallons per hour and extending range to 268 miles over 9.5 hours. The rapid planing system enabled a quick time to plane of 3.3 seconds, with acceleration milestones of 20 mph in 5 seconds, 30 mph in 7.4 seconds, 40 mph in 11.6 seconds, and 50 mph in 17.5 seconds. The boat exhibits a 10-degree bow rise during acceleration, which can be trimmed to achieve a smooth running pad with minimal spray. The hull’s design minimizes chine walking at high speeds, even in choppy conditions, with responsive steering allowing quick corrections. The windscreen effectively deflects wind off the operator’s face, although removing the port console increases cockpit space at the expense of wind protection for the passenger.
Conclusion
The Nitro Z7 stands out as a well-built, comfortable, and highly maneuverable bass boat. Its combination of thoughtful fishing features, efficient powertrain, and refined handling make it a strong contender in its class. The boat’s aesthetic appeal is enhanced by multiple standard and optional color packages, and it comes standard with a powder-coated, color-matched single-axle trailer equipped with 14-inch wheels. Overall, the Z7 offers anglers a capable platform that balances performance with practical fishing amenities.
Overview from around the web 2010 Nitro Z-7
Customers are praising the 2010 Nitro Z-7 for its excellent performance on the water, particularly noting its smooth handling and stability during fishing trips
Many highlight the spacious deck layout, which provides ample room for casting and gear storage. The boat's powerful engine and reliable build quality receive frequent compliments, making it a favorite among anglers looking for both speed and durability. Overall, users appreciate the combination of functionality and comfort that the 2010 Nitro Z-7 offers.
The Biggest Pros and Cons
The 2010 Nitro Z-7 is a versatile bass boat known for its performance and features. Here are some pros and cons to consider:
Pros
Powerful Performance: Equipped with a reliable engine that offers excellent speed and acceleration for quick transitions between fishing spots.
Spacious Deck: Generous deck space provides ample room for casting and maneuvering, making it comfortable for anglers.
Quality Build: Solid construction with durable materials ensures longevity and resistance to wear and tear.
Storage Capacity: Multiple storage compartments help keep gear organized and secure.
Advanced Electronics: Often comes outfitted with modern fish-finding and navigation systems to enhance fishing efficiency.
Cons
Fuel Efficiency: The powerful engine may lead to higher fuel consumption compared to smaller or less powerful boats.
Weight: The robust build and equipment can make the boat heavier, which might affect trailering and launching.
Limited Seating: While the deck is spacious, seating is generally designed for a small crew, which may not accommodate larger groups comfortably.
Maintenance: Advanced electronics and powerful engines might require more regular maintenance to keep everything in optimal condition.
Made For
The 2010 Nitro Z-7 is designed for serious anglers who demand high performance and versatility on the water. Ideal for bass fishing enthusiasts, this boat offers a combination of speed, stability, and advanced features that cater to both competitive tournament fishing and recreational outings. Whether you're navigating shallow waters or cruising across the lake, the Nitro Z-7 provides the reliability and functionality needed to enhance your fishing experience.
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Want to update the details or images for this boat? Claim this listing by getting in touch.
Boat Location
Contact Tracker Boating Center | Longview, TX about 2010 Nitro Z-7
415 South Eastman Rd., Longview, TX, 75602
Login with Google