2026 Mako Pro Skiff 19 CC
$55,730
Boat in San Antonio, TX 78257 US
Pro Skiff 19 CC
1 Engine (MERCURY MARINE)
19.3 feet
--
Fiberglass/Reinforced
The biggest Pro Skiff in our lineup boasts a best-of-the best features set for all-out inshore and nearshore domination. A 150HP rating and 30-gallon fuel capacity give you extra range to go farther and hit more spots, while the finely tuned Advanced Invited V (AIV) hull delivers a smooth, dry ride and a superior draft. The massive front deck includes three lockable storage compartments equipped with gas-assist lift struts, stainless hardware, and a bow anchor locker/storage compartment.
Deep gunnels in the cockpit deliver peace of mind and safety and the center console carries everything you need for a successful day on the water: responsive steering, fishfinding electronics, six rod holders, storage within, and a throttle connected to a powerful Mercury® outboard that delivers exhilarating performance on command. Dual baitwell/livewells carry tons of bait for a full day of fishing, and you can stash your catch (or beverages) in the 65-quart Orion® cooler at the helm. The Pro Skiff 19 CC is engineered to deliver peak inshore performance with huge value and unmistakable quality.
Additional Specs
- Length:19' 4"
- Beam: 8' 0"
- Bottom Width: 6' 8"
- Max. Recommended HP: 150 HP
- Fuel Capacity: 30 gal.
- Max. Person Capacity: 6 persons
- Max. Person Weight: 814 lbs.
- Max. Person, Motor & Gear Weight: 2400 lbs.
- Interior Depth: 21"
- Transom Height At Center Line: 25"
- Draft: 9"
- Average Dry Weight: 1980 lbs.
- Average Hull Weight: 1450 lbs.
- Average Package Weight: 2950 lbs.
- Package Height: 6' 4"
- Storage Length: 22' 9"
Certification & Safety
- Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
- NMMA® certified
- Factory leak tested for hull, plumbing & fitting integrity
- Horn
Console
- Infused console
- Contoured acrylic windscreen
- Hydraulic steering
- Multifunction speedometer/fuel gauge & tachometer/trim gauge
- Binnacle control w/power trim
- Fiberglass forward-console seat w/13-gal. (49.21 L) insulated baitwell & padded seat cushion
- Powdercoated aluminum grab rail
- Area to flush- & surface-mount additional electronics
- 6 vertical flush-mounted console rod holders
- Below-console storage area
Leaning Post
- Modular leaning post & cushioned helm seat for seated or standing operation
Interior
- Integrated trolling motor landing w/embedded aluminum plate for easy installation
- Anchor locker
- 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
- 360° fishability
- Raised bow fishing platform w/patterned non-skid surface & closed storage compartments
- Rotomolded, removable Orion® 65-qt. (61.51 L) foam-filled helm seat/cooler w/superior ice-keeping ability
- Raised aft fishing platform w/patterned non-skid surface & integrated jump seats
- Aft 26-gal. (98.42 L) baitwell w/Pro-Air® aeration system
Exterior
- Award-winning Advanced Inverted V (AIV) hull design for superb load-carrying abilities & a smoother, drier ride in choppy waters
- Integrated anti-spray hull design
- Factory-matched stainless steel propeller
Hardware
- 5 folding stainless steel cleats
- Reboarding step & powdercoated aluminum grab handle
- Stainless steel bow & stern eyes
- Stainless steel fuel fill
Construction & Exterior
- Color: MAKO® Bone White gelcoat
- 100% composite construction
- Encapsulated, fiberglass-infused transom w/high-density Coosa® Bluewater composite core
- Molded, patterned non-skid casting platforms & cockpit sole
- Console chemically bonded & mechanically fastened to deck w/.25" (6.35 mm) aluminum backing plates
- Hull/deck joint chemically bonded & mechanically fastened w/stainless steel fasteners for strength & durability
- 1-piece gelcoated fiberglass deck liner injected w/expanding closed-cell foam for flotation, added strength & a quiet ride
- Premium marine-grade stainless steel hardware & fasteners for corrosion resistance
- Composite seat substrates
- Heavy-duty rub rail
Electrical, Mechanical & Plumbing System
- 1,000 GPH (3,785.41 LPH) bilge pump w/automatic switch
- 1,000 GPH (3,785.41 LPH) baitwell pump w/adjustable spray head
- Integrated EPA-compliant fuel system w/rotocast corrosion-free fuel tank
- High-speed baitwell water pickup
- USCG-compliant navigation lights
- Cockpit courtesy lights
- Interstate® cranking battery w/tray
- Marine-grade rocker switches
- Marine-grade tinned wiring w/submersible connectors
- Multiple 12V & USB charging outlets
Trailer
- Custom tandem-axle trailer
- All-welded, tubular frame for a unitized structure w/exceptional strength-to-weight ratio
- Hot-dipped galvanized construction
- Dual-axle brakes
- 14" (35.56 cm) hot-dipped galvanized wheels w/radial tires
- Super Lube hubs
- Swing-up locking jack w/swivel wheel
- Space-saving swing-away tongue to reduce storage length
- Outboard motor support to reduce hull & transom stress while towing
- Submersible lights
- 4 carpeted bunks to protect hull
- Safety cables
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
Price History
| Date | Event | Price |
|---|---|---|
| 4/17/26 | Price increased | $55,730(+0.2%) |
| 3/21/26 | Initial price | $55,605 |
2026 Mako Pro Skiff 19 CC Video Tours
Boattest.com Review
Overview
The Mako ProSkiff 19 is a versatile fishing boat designed primarily for inland and coastal anglers. Positioned in the middle of the ProSkiff range, this model measures 19 feet 4 inches in length with a 7-foot beam and features a shallow 9-inch draft, making it ideal for navigating skinny waters. The boat rides on an award-winning hull design that emphasizes stability, performance, and shallow water capability.
Hull Design and Performance
The ProSkiff 19’s shallow draft is largely attributed to its Advanced Inverted V (AIV) hull design. This hull begins at the bow with a pronounced spray rail and anti-spray pocket, while the outer edges sweep down to two outer keels that serve as the primary running and support surfaces. The center keel starts higher at the bow and slopes down to meet the outer keels at the stern, enhancing lateral stability and providing a smooth ride. Two clear water channels in the hull draw aerated and disturbed water away from the propeller, delivering cleaner water to the prop for quicker acceleration and improved fuel economy. During testing, the boat weighed approximately 2,251 pounds with two people aboard, 20.25 gallons of fuel, and test equipment. Powered by a 115 horsepower Mercury 115 EXLPT four-stroke outboard paired with a 14 5/8 by 21-inch Tempest Plus three-blade stainless steel propeller, the ProSkiff 19 achieved a top speed of 44.5 miles per hour at 6,000 RPM. Its best cruise speed was 20.5 miles per hour at 3,000 RPM, burning 2.6 gallons per hour, which translates to 7.9 miles per gallon and a range of 191 statute miles with a 10% fuel reserve. The boat accelerates rapidly, planing in 3.7 seconds, reaching 20 miles per hour in 5.7 seconds, and 30 miles per hour in 9.4 seconds, with a bow rise of about 15 degrees under hard acceleration. Maneuverability tests showed the outer keels provide a tight turning radius and maintain a flat attitude through turns, though aggressive handling can cause slight hopping.
Exterior Features and Deck Layout
The aft casting platform measures 3 feet 4 inches fore to aft and 6 feet 10 inches across, providing nearly 23 square feet of fishing space. The platform demonstrates structural rigidity, deflecting only 2 inches when walked across from corner to corner. Freeboard at the stern is 1 foot 3 inches, and safety features include a grab handle on the starboard side and a plastic step on the transom for easy reboarding. The aft deck contains four in-deck plastic hatches; the starboard hatch conceals the hydraulic pump for the optional jack plate, while the center hatch covers a 25-gallon livewell. The helm seat is mounted atop an insulated 85-quart cooler with a drain, secured by bungee latches and straps. Forward of the helm, the console includes integrated rod holders on each side, a padded backrest and seat with two cup holders, and a hinged bottom cushion that opens to reveal an insulated 18-quart cooler, which was upgraded to a bait well on the test boat. The forward casting deck is 6 feet 3 inches wide with a non-skid surface and a bow freeboard of 1 foot 11 inches. The bow locker features reinforced honeycomb construction with integrated racks for navigation and anchor lights, and ample storage space. Standard equipment includes four stainless steel cleats, and the test boat was outfitted with an optional bimini top. The fuel fill is conveniently located on the port side to facilitate refueling from land-based gas stations.
Helm and Controls
The helm is equipped with standard instrumentation including a tachometer, fuel gauge, and water pressure gauge, with space allocated for optional electronics. Above the windscreen, a sturdy rail provides a secure handhold. The accessory switch panel features a master power button that controls the entire 12-volt system and a ProTrim turn signal-style switch for operating the jack plate. The battery and fire extinguisher are housed securely within the console base, while the battery switch and main circuit breaker are conveniently accessible just outside the locker opening.
Additional Features and Summary
The ProSkiff 19 offers anglers a turnkey solution for coastal saltwater fishing, complete with a livewell, six rod holders, and a galvanized single-axle trailer. The optional jack plate enhances shallow water versatility by allowing the motor to be raised for navigating skinny water environments. The boat is available with six color wrap options for the hull sides, adding customization potential. Overall, the Mako ProSkiff 19 combines a thoughtfully engineered hull, practical fishing amenities, and efficient performance, making it a reasonably priced and capable choice for anglers targeting inland and coastal waters.
Overview from around the web 2026 Mako Pro Skiff 19 CC
Customers are praising the 2026 Mako Pro Skiff 19 CC for its exceptional versatility and performance in both shallow waters and open seas
Many highlight its sturdy construction and reliable Yamaha engine, which delivers smooth and efficient power. The spacious deck layout and ample storage make it ideal for fishing enthusiasts, while the comfortable seating and intuitive controls enhance the overall boating experience. Users also appreciate the boat's excellent stability and maneuverability, making it a top choice for anglers seeking a dependable and well-designed center console skiff.
The Biggest Pros and Cons
The 2026 Mako Pro Skiff 19 CC offers a range of features that make it a versatile and reliable choice for anglers and boating enthusiasts. Here are some pros and cons to consider:
Pros
Durable Construction: Built with high-quality materials, the Mako Pro Skiff 19 CC is designed to withstand tough conditions on the water.
Spacious Center Console Layout: Provides ample room for fishing gear and movement, enhancing comfort and functionality.
Shallow Draft: Allows access to shallow waters, making it ideal for inshore fishing and exploring tight spots.
Efficient Hull Design: Offers a smooth and stable ride, improving fuel efficiency and overall performance.
Ample Storage: Multiple storage compartments help keep gear organized and secure.
Versatile Fishing Features: Equipped with rod holders, live wells, and casting decks tailored for serious anglers.
Cons
Limited Seating: The focus on fishing space means seating may be minimal, potentially less comfortable for larger groups or family outings.
Basic Amenities: Compared to larger boats, the 19 CC may lack some luxury features or advanced electronics.
Open Design Exposure: The center console layout offers less protection from the elements, which could be a downside in adverse weather conditions.
Trailer Size: Depending on your towing vehicle, the boat’s size may require careful consideration for transport and storage.
Made For
The 2026 Mako Pro Skiff 19 CC is designed for anglers and boating enthusiasts who want a versatile, durable, and high-performance center console skiff. It is ideal for those seeking a shallow-draft boat capable of navigating both inshore waters and small offshore trips. Whether you're a serious fisherman looking for a reliable platform with ample storage and fishing features, or a family wanting a stable and comfortable boat for day outings, the Pro Skiff 19 CC offers the perfect combination of functionality and ease of use. Its rugged construction and thoughtful design make it suitable for both experienced boaters and those new to saltwater fishing.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Texas, United States Similar to the 2026 Mako Pro Skiff 19 CC
Compare with similar boats and find the perfect one for you.
2026 Mako Pro Skiff 19 CC | |||||
|---|---|---|---|---|---|
| $55,730 | $51,840 | $51,490 | $51,355 | $51,355 | $40,499 |
| San Antonio | Fort Worth | Katy | Round Rock | Spring | Allen |
| 19' | 19' | 19' | 19' | 19' | 19' |
| MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE | MERCURY MARINE |
| 150 hp | 150 hp | 150 hp | 150 hp | 150 hp | 115 hp |
| 61 | 209 | 125 | 108 | 199 | 976 |
Other 2026 Mako Pro Skiff 19 CC For Sale in Texas, United States
Other Mako Pro Skiff 19 CC boats for sale in Texas, United States
Other Mako boats for sale in Texas, United States
Meet the Broker

Address
Boat Location
Contact Bass Pro Boating Center | San Antonio, TX about 2026 Mako Pro Skiff 19 CC
17907 IH-10 West, San Antonio, TX, 78257




















































































































