2018 Mako 284 Center Console Boat in Stuart, FL 34994 US
Built in 2018
284 Center Console
2 Engines (2x Mercury)
28 feet
Gas
Fiberglass/Reinforced
NEW ARRIVAL
2018 MAKO 284
TWIN MERCURY VERADOS 250s
450 HOURS
NO TRAILER
LIFT KEPT
LOCATED IN STUART, FL
The 284 CC is well-equipped to fish, with aft in-deck port and starboard 390-qt. fishboxes, and outrigger-ready fiberglass hardtop and a full-featured baitstation. And the quality of construction (100% composite) is unparalleled-the hull and deck are chemically bonded and mechanically fastened every 6" with stainless steel fasteners. The 1-piece, molded, gelcoated stringer grid reinforces the hull for a lifetime of fine performance.
Foam-injected hull w/integrated 1-piece fiberglass stringer grid
Hull/deck joint chemically bonded & fastened 360° w/stainless steel fasteners
Fiberglass leaning post w/backrest, flip-up cushion, storage & bait prep station w/freshwater sink
Deep, high-capacity integrated livewell with high-speed pickup.
Outrigger-ready fiberglass hardtop w/5 rod holders, electronics box & 3 spreader lights
Console interior w/gelcoat-finished surface, sink, battery switch panel & 6' head room
Oversized forward-console seat w/storage compartment & 2 drink holders
Recessed electric trim tabs w/optional automatic trim tabs
Non-skid surface on walking flats, foredeck, gunnel tops, sole, stern platform & hatch covers
Oversized forward console seat and port/starboard forward bow seating with 93-liter insulated coolers.
Stand-up enclosed head compartment (over 6' headroom) featuring a freshwater sink and electric marine toilet.
Custom anodized aluminum tilt steering wheel with knob, dual-cylinder hydraulic steering, and recessed electric trim tabs with auto-retract.
Joystick Piloting system available for purchase.
- Length:28' 4"
- Beam: 9' 10"
- Bottom width: 7' 9"
- Max. recommended HP: 700 HP
- Fuel capacity: 228 gal.
- Max. person capacity: 13 persons
- Max. person weight: 5490 lbs.
- Max. person, motor & gear weight: 5791 lbs.
- Interior depth: 33"
- Transom height at center line: 30"
- Deadrise: 21 degrees
- Draft: 21"
- Dry weight: 7270 lbs.
- Average hull weight: 6000 lbs.
- Average package weight: 9800 lbs.
- Package height w/T-top or hardtop: 12' 4"
- Storage length: 37' 10"
Certification & Safety
- Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
- NMMA® certified
- Factory leak tested for hull, plumbing & fitting integrity
- Stainless steel hardware & fasteners for corrosion resistance
- CorrosionX stainless spray treatment included
- Horn
Console
- Custom anodized aluminum tilt steering wheel w/knob
- Dual-cylinder hydraulic steering
- Binnacle-mounted motor control
- Gauge panel w/digital gauges
- Trim tab switches w/position indicator lights & auto retract
- Powdercoated aluminum battery switch panel w/labels, main power shutoff, emergency parallel switch, removable knobs & voltage sensing relays (VSR)
- Switch panel w/manual reset circuit breakers & illuminated switches
- Recessed switch panel w/circuit breakers & motor ignition switches
- Easy access to helm electronics, instruments & switches
- Oversized forward-console seat w/storage compartment & 2 drink holders
- Integrated full-width fiberglass footrest w/non-skid surface
- Tempered safety glass windscreen w/aluminum frame
- Easy-access battery storage
- Marine-grade tinned wiring w/submersible connectors
- Extra-large electronics mounting surface
- 2 console drink holders
- 12V DC outlet
Construction & Exterior
- 100% composite construction
- Coosa® Bluewater 100% composite transom core
- Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core
- Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
- 1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish
- Closed-cell, foam-injected stringer grid for USCG-approved flotation
- Premium marine-grade stainless steel hardware
- Heavy-duty rub rail w/stainless steel insert
- Closed-molded hatch covers w/finished undersides & integrated gaskets
- Aluminum backing plates for cleats, chocks & hinges
- Recessed, pull-out, telescoping boarding ladder
- MAKO® Bone White gelcoat
Electrical, Mechanical & Plumbing Systems
- Aluminum main fuel tank w/4 baffles
- 2 automatic 2,000 GPH (7,570 LPH) bilge pumps
- 1,600 GPH (6,057 LPH) & 1,100 GPH (4,164 LPH) baitwell pumps
- Pressurized raw water washdown pump
- High-speed raw water intake
- Pressurized freshwater pump
- 13-gal. (49 L) freshwater tank for sinks & shower
- USCG-compliant navigation lights
- 2 cockpit courtesy lights & 1 head light
- 1 cranking battery per outboard
- Marelon® corrosion-free seacocks on all below-water thru-hull fittings
- Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment
- Pre-wired for optional stereo system & speakers
- Pre-wired for optional anchor windlass
Head
- Gelcoat-finished surface, sink, wiring access hatches, battery switch panel, battery access & 6' (1.8 m) head room
- Sink w/faucet & on-demand freshwater
- Portlight in head door
Interior
- NEW 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
- Anchor locker w/protective inner liner
- Foredeck dodger mounting boss
- Port & starboard forward seats w/99-qt (94 L) fishboxes w/gravity overboard drainage
- 470-qt. (445 L) center bow in-deck storage compartment w/drain
- Low profile brushed anodized aluminum bow rails
- Self-bailing cockpit w/gutters, oversized drains & transom valves
- 3 port & 3 starboard gunnel-mounted rod holders
- Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.1 m) long
- Port & starboard tilt-out storage bins
- Freshwater shower w/pull-out spray head
- 290-qt. (274 L) insulated port & starboard aft in-deck fishboxes w/Gulper macerator & overboard discharge
- Molded non-skid surfaces throughout
- Bilge access hatch
- Walk-thru transom w/latching door
- Port & starboard molded-in swim platforms
- Port & starboard aft coaming bolsters
- 2 bow drink holders
Leaning Post
- Fiberglass leaning post
- Backrest
- Flip-up cushion
- Storage below
- Bait prep station w/freshwater sink, removable cutting board, 50-gal. (189.27 L) aerated anti-slosh baitwell & tackle storage
Optional Trailer
- OPTIONAL aluminum triple-axle trailer available.
- NMMA® certified.
- DOT approved.
- Triple-axle brakes.
- 15" (38.1 cm) radial tires w/galvanized V5 wheels.
- Oil bath hubs.
- Torsion-axle suspension.
- Heavy-duty winch w/nylon strap & safety strap.
- Stainless steel hardware.
- Galvanized steel components.
- LED lighting.
- LED marker lights.
- PVC loading guides.
- Galvanized fenders.
Performance
- Legendary dry-riding MAKO® hull
- Aggressive deep V hull design
- Performance lifting strakes
- Recessed electric trim tabs
- Factory-matched stainless steel propellers
T-Top or Hardtop
- Outrigger-ready fiberglass hardtop w/5 rod holders, electronics box & 3 spreader lights (1 fore, 2 aft)
- .25" (.64 cm) in-deck aluminum backing-plate reinforcement for hardtop frame
- .25" (.64 cm) aluminum backing-plate reinforcement for hardtop
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 7/1/26 | Initial price | $99,000 |
Mako 284 Center Console: BoatTEST Review
Overview
The Mako 284 Center Console stands as the flagship model in Mako's line of offshore fishing boats, embodying over 40 years of development focused on fishability, comfort, and durability. Designed as a capable open ocean fishing rig, it incorporates professional-grade features and advanced materials to ensure reliable performance in diverse weather conditions while providing ample storage and workspace for serious anglers.
Exterior Design and Deck Layout
At the stern, the 284CC offers a spacious area that facilitates easy movement around the engines and convenient access to a dive ladder for water entry. A large port side walkthrough door provides access, adjacent to which is a swim shower and water connection. The test model featured a complete bolster package for enhanced protection during fishing. Mechanical components and pumps are accessible through a sizable in-floor hatch. Twin insulated fish boxes, each with a 390-quart capacity, are integrated into the aft floor with dedicated drains and macerator pumps to keep catches fresh. Rod racks are installed under the gunnels, with additional rod holders mounted on the gunnel tops, catering to professional fishing needs. For added comfort when carrying passengers, an optional easy store stern seat is available. The bait prep station includes a 50-gallon bait well, grab rail, sink, and tackle trays. The standard T-top, equipped with five rod holders, can be upgraded with features such as three outriggers and ten rod holders, as seen on the test boat, which also included dual electronics setups for redundancy.
Helm and Control Station
The helm area is designed with ample space to accommodate a customized electronics array. Steering is managed via dual hydraulic cylinders, complemented by standard recessed trim tabs and digital throttle and shift controls compatible with Mercury Verado engines. The leaning post seat offers comfort with a supportive backrest, starboard-side tip-out tackle bins, and extensive under-seat storage. On the port side, six tackle organizers and two tackle drawers provide additional storage. The helm layout prioritizes functionality and ease of use for offshore fishing operations.
Console and Interior Amenities
The console compartment is thoughtfully arranged to include a battery switch and management center, a sink, electronics access, and a portable head. The console seat is designed for comfort and practicality, featuring a 30-quart insulated cooler beneath and access points for water fill and waste pump out. This area also houses a head compartment, enhancing the boat's family-friendly design. Protective rails surround the bow and bench seats forward, with bench seat lockers and a large in-floor locker providing ample storage. The bow houses a sizable anchor windlass compartment and a line locker equipped with power for kite reels, demonstrating the boat's versatility for various fishing techniques.
Specifications and Performance
Measuring 28 feet 4 inches in length with a beam of 9 feet 10 inches, the 284 Center Console has a hull weight of approximately 6,000 pounds. It is rated to support up to 600 horsepower via outboard engines, with pre-rigging options available for Mercury, Honda, Suzuki, and Bombardier powerplants. The fuel capacity of 235 gallons enables extended offshore excursions. The design includes wide walkways and spacious deck areas, facilitating efficient fishing operations from bow to stern.
Conclusion
The Mako 284 Center Console is a well-conceived offshore fishing platform that blends professional-grade features with user-friendly design elements. Its robust construction, ample storage, and customizable fishing amenities make it suitable for serious anglers seeking a reliable and comfortable boat for diverse offshore conditions. The model's versatility and thoughtful layout support a wide range of fishing styles and family-friendly use, making it a compelling choice in its class.
Overview from around the web 2018 Mako 284 Center Console
Customers have been highly impressed with the 2018 Mako 284 Center Console, praising its robust design and impressive performance on the water
Many appreciate the spacious layout, which allows for comfortable seating and ample storage options, making it ideal for both fishing trips and family outings. The powerful twin engines receive high marks for their reliability and efficiency, providing smooth handling and excellent speed, even in choppy conditions. Enthusiasts frequently mention the boat’s stability, highlighting that the deep-V hull design cuts through waves with ease, ensuring a comfortable ride. The fishing features are another standout, with anglers lauding the generous livewells, rod storage, and the built-in tackle box. The well-thought-out console includes user-friendly electronics and plenty of space for additional gear, making it a favorite among serious fishermen. In terms of aesthetics, customers appreciate the sleek and modern look of the Mako 284, which combines style with functionality. Overall, the consensus reflects a strong satisfaction with the boat’s performance, versatility, and quality, making it a popular choice for boating enthusiasts.
Made For
The 2018 Mako 284 Center Console is designed for avid anglers and boating enthusiasts who seek a perfect blend of performance, versatility, and comfort. This boat caters to both serious fishermen and casual day cruisers, making it an excellent choice for families, friends, and all those who appreciate time on the water. For fishing enthusiasts, the Mako 284 boasts ample storage for tackle and gear, spacious live wells, and multiple rod holders, ensuring you're well-equipped for a successful day on the water. Its deep-V hull offers a smooth and stable ride, allowing you to navigate waves and choppy conditions with confidence. Families and social boaters will appreciate the boat's spacious layout, offering room for friends and loved ones to enjoy the journey. Comfortable seating, a bow area ready for sunbathing, and a well-designed helm provide an inviting space for relaxation and entertainment. Whether you're pursuing your next big catch or enjoying a leisurely cruise, the 2018 Mako 284 Center Console is tailored for those who demand quality, innovation, and reliability from their boat, making it a fantastic choice for any boating lifestyle.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Florida, United States Similar to the 2018 Mako 284 Center Console
Compare with similar boats and find the perfect one for you.
 2018 Mako 284 Center Console | |||||
|---|---|---|---|---|---|
| $99,000 | $97,839 | $97,569 | $100,500 | $97,079 | $93,275 |
| Stuart | Miami | Miami | Miami | Dania | Dania |
| 28' | 22' | 22' | 28' | 22' | 21' |
| 2' | - | - | - | - | - |
| Mercury | MERCURY MARINE | MERCURY MARINE | Mercury | MERCURY MARINE | MERCURY MARINE |
| 250 hp | 250 hp | 200 hp | 350 hp | 200 hp | 200 hp |
| 6 | 76 | 30 | 3 | 28 | 46 |
Other Mako 284 Center Console boats for sale in Florida, United States
Other Mako boats for sale in Florida, United States
Meet the Broker
Address
Boat Location
Contact Adonai Yachts International about 2018 Mako 284 Center Console
19701 SW 197th Ave, Miami, FL, 33187
Login with Google