2017 Mako 284 Center Console Boat in Forked River, NJ 08731 US
Built in 2017
284 Center Console
2 Engines (2x Mercury)
28 feet
Gas
Fiberglass/Reinforced
JOYSTICK PILOTING 350 Verados
The MAKO® 284 CC is a perfect predator, whether you're hunting marlin in the Gulf Stream or mahi in the kelp paddies. Powered by 700 horses and with a 228-gallon fuel capacity it's got the range and speed to get you out farther and keep you out longer.
The 284 CC is well-equipped to fish, with aft in-deck port and starboard 390-quart fishboxes, an outrigger-ready fiberglass hardtop and a full-featured baitstation. And the quality of construction (100% composite) is unparalleled-the hull and deck are chemically bonded and mechanically fastened every 6" with stainless steel fasteners. The 1-piece, molded, gelcoated stringer grid reinforces the hull for a lifetime of fine performance. And it's backed by MAKO Assurance-the best factory warranty in the business.
- Foam-injected hull w/integrated 1-piece fiberglass stringer grid
- Hull/deck joint chemically bonded & fastened 360° w/stainless steel fasteners
- Fiberglass leaning post w/backrest, flip-up cushion, storage & bait prep station w/freshwater sink
- Outrigger-ready fiberglass hardtop w/5 rod holders, electronics box & 3 spreader lights
- Optional twin Mercury® 350 XL White Verado® w/Joystick Piloting
- Console interior w/gelcoat-finished surface, sink, battery switch panel & 6' (1.8 m) head room
- Oversized forward-console seat w/storage compartment & 2 drink holders
- Recessed electric trim tabs
- Non-skid surface on walking flats, foredeck, gunwale tops, sole, stern platform & hatch covers
- Length:28' 4"
- Beam: 9' 10"
- Max. recommended HP: 700 HP
- Min. recommended HP: 400 HP
- Fuel capacity: 228 gal.
- Max. person capacity: 13 persons
- Max. person weight: 5490 lbs.
- Max. weight capacity : 5791 lbs.
- Interior depth: 0'
- Transom height at center line: 30'
- Deadrise: 21 degrees
- Draft: 21'
- Approx. hull weight: 6000 lbs.
Comfort, Convenience & Peace of Mind
- Backed by the MAKO® Assurance—the best warranty in the business
- NMMA Certified
- Factory leak tested for hull, plumbing & fitting integrity
- Stainless steel hardware & fasteners for corrosion resistance
Console
- Custom anodized aluminum tilt steering wheel w/knob
- Dual-cylinder hydraulic steering
- Oversized forward-console seat w/storage compartment & 2 drink holders
- Tempered safety glass windscreen w/aluminum frame
- Sink w/faucet & on-demand freshwater
- Gauge panel w/digital gauges
- Integrated full-width fiberglass footrest w/non-skid surface
- Portlight
- Trim tab switches w/position indicator lights & auto retract
- Powdercoated aluminum battery switch panel w/labels, main power shutoff, emergency parallel switch, removable knobs & voltage sensing relays (VSR)
- Switch panel w/manual reset circuit breakers & illuminated switches
- Recessed switch panel w/circuit breakers & motor ignition switches
- Heavy-duty electrical switching system w/battery selector switch(es)
- Easy access to helm electronics, instruments & switches
- Extra-large electronics mounting surface
- Easy-access battery storage
- Console interior w/gelcoat-finished surface, sink, wiring access hatches, battery switch panel, battery access & 6' (1.8 m) head room
- Marine-grade tinned wiring w/submersible connectors
- 2 drink holders
- 12V DC outlet
Construction & Exterior
- 100% composite construction
- Coosa® Bluewater 100% composite transom core
- .25" (.64 cm) aluminum backing-plate reinforcement for T-top
- Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core
- Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/stainless steel fasteners
- 1-piece molded fiberglass stringer grid w/integrated transom knee supports
- Foam-injected stringer grid
- Marine-grade stainless steel hardware
- Heavy-duty rub rail w/stainless steel insert
- Aluminum backing plates for cleats, chocks & hinges
- Closed-molded hatch covers w/finished undersides & integrated gaskets
- Recessed, pull-out, telescoping boarding ladder
- MAKO® White gelcoat
Electrical, Mechanical & Plumbing Systems
- 2 automatic 2,000 GPH (7,570 LPH) bilge pumps
- 1,600 GPH (6,057 LPH) & 1,100 GPH (4,164 LPH) baitwell pumps
- Pressurized freshwater pump
- Raw water washdown pump
- High-speed raw water intake
- Aluminum fuel tank w/4 baffles
- 2 Interstate® cranking batteries & 1 Interstate house battery
- USCG-compliant navigation lights
- 2 cockpit courtesy lights & 1 console interior light
- Marelon® corrosion-free seacocks on all below-water thru-hull fittings
- Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment
- Pre-wired for optional stereo system & speakers
- Pre-wired for optional anchor windlass
Interior
- Port & starboard forward seats w/gravity overboard drainage
- Port, starboard & aft bolsters
- Fiberglass leaning post w/backrest, flip-up cushion, storage below & bait prep station w/freshwater sink, removable cutting board, 50-gal. (189.27 L) aerated anti-slosh baitwell & tackle storage
- Outrigger-ready fiberglass hardtop w/5 rod holders, electronics box & 3 spreader lights (1 fore, 2 aft)
- Self-bailing cockpit w/gutters, oversized drains & transom valves
- 470-qt. (445 L) center bow in-deck storage compartment w/drain
- 3 port & 3 starboard gunnel-mounted rod holders
- Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.1 m) long
- 290-qt. (369 L) insulated port & starboard aft in-deck fishboxes w/gravity drainage & diaphragm pump
- Port & starboard tilt-out storage bins
- 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
- Freshwater shower w/pull-out spray head
- Bilge access hatch
- Low profile brushed anodized aluminum bow rails
- Port & starboard aft coaming bolsters
- Molded non-skid surfaces throughout
- Port & starboard molded-in swim platforms
- 4 drink holders
- Walk-thru transom w/latching door
- Anchor locker w/protective inner liner
- Foredeck dodger mounting boss
Performance
- Legendary dry-riding MAKO® hull
- Aggressive deep V hull design
- Performance lifting strakes
- Recessed electric trim tabs
- Factory-matched stainless steel propellers
Trailer
- OPTIONAL aluminum triple-axle trailer available
- NMMA Certified trailer
- DOT approved
- Triple-axle brakes
- 15" (38.1 cm) radial tires w/galvanized V5 wheels
- Oil bath hubs
- Torsion-axle suspension
- Heavy-duty winch w/nylon strap & safety strap
- Stainless steel hardware
- Galvanized steel components
- LED lighting
- LED marker lights
- PVC loading guides
- Galvanized fenders
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 5/31/26 | Initial price | $124,997 |
Boattest.com Review
Overview
The Mako 284 Center Console stands as the flagship model in Mako's line of offshore fishing boats, embodying over 40 years of development focused on fishability, comfort, and durability. Designed as a capable open ocean fishing rig, it incorporates professional-grade features and advanced materials to ensure reliable performance in diverse weather conditions while providing ample storage and workspace for serious anglers.
Exterior Design and Deck Layout
At the stern, the 284CC offers a spacious area that facilitates easy movement around the engines and convenient access to a dive ladder for water entry. A large port side walkthrough door provides access, adjacent to which is a swim shower and water connection. The test model featured a complete bolster package for enhanced protection during fishing. Mechanical components and pumps are accessible through a sizable in-floor hatch. Twin insulated fish boxes, each with a 390-quart capacity, are integrated into the aft floor with dedicated drains and macerator pumps to keep catches fresh. Rod racks are installed under the gunnels, with additional rod holders mounted on the gunnel tops, catering to professional fishing needs. For added comfort when carrying passengers, an optional easy store stern seat is available. The bait prep station includes a 50-gallon bait well, grab rail, sink, and tackle trays. The standard T-top, equipped with five rod holders, can be upgraded with features such as three outriggers and ten rod holders, as seen on the test boat, which also included dual electronics setups for redundancy.
Helm and Control Station
The helm area is designed with ample space to accommodate a customized electronics array. Steering is managed via dual hydraulic cylinders, complemented by standard recessed trim tabs and digital throttle and shift controls compatible with Mercury Verado engines. The leaning post seat offers comfort with a supportive backrest, starboard-side tip-out tackle bins, and extensive under-seat storage. On the port side, six tackle organizers and two tackle drawers provide additional storage. The helm layout prioritizes functionality and ease of use for offshore fishing operations.
Console and Interior Amenities
The console compartment is thoughtfully arranged to include a battery switch and management center, a sink, electronics access, and a portable head. The console seat is designed for comfort and practicality, featuring a 30-quart insulated cooler beneath and access points for water fill and waste pump out. This area also houses a head compartment, enhancing the boat's family-friendly design. Protective rails surround the bow and bench seats forward, with bench seat lockers and a large in-floor locker providing ample storage. The bow houses a sizable anchor windlass compartment and a line locker equipped with power for kite reels, demonstrating the boat's versatility for various fishing techniques.
Specifications and Performance
Measuring 28 feet 4 inches in length with a beam of 9 feet 10 inches, the 284 Center Console has a hull weight of approximately 6,000 pounds. It is rated to support up to 600 horsepower via outboard engines, with pre-rigging options available for Mercury, Honda, Suzuki, and Bombardier powerplants. The fuel capacity of 235 gallons enables extended offshore excursions. The design includes wide walkways and spacious deck areas, facilitating efficient fishing operations from bow to stern.
Conclusion
The Mako 284 Center Console is a well-conceived offshore fishing platform that blends professional-grade features with user-friendly design elements. Its robust construction, ample storage, and customizable fishing amenities make it suitable for serious anglers seeking a reliable and comfortable boat for diverse offshore conditions. The model's versatility and thoughtful layout support a wide range of fishing styles and family-friendly use, making it a compelling choice in its class.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in New Jersey, United States Similar to the 2017 Mako 284 Center Console
Compare with similar boats and find the perfect one for you.
No image available 2017 Mako 284 Center Console | |||||
|---|---|---|---|---|---|
| $124,997 | $118,839 | $94,900 | $69,995 | $69,900 | $65,900 |
| Forked River | Atlantic City | Belmar | Brick | Belmar | Beach Haven |
| 28' | 25' | 26' | 27' | 21' | 27' |
| 2' | - | - | - | - | - |
| Mercury | MERCURY MARINE | Suzuki | Yamaha | Suzuki | Mercury |
| 350 hp | 300 hp | 200 hp | 200 hp | 250 hp | 200 hp |
| 6 | 113 | 248 | 174 | 445 | 45 |
Other Mako boats for sale in New Jersey, United States
Meet the Broker
Address
Boat Location
Contact Cast Off Yacht Sales about 2017 Mako 284 Center Console
Cast Off Yacht Sales, Forked River, NJ, 08731
Login with Google