1980 Kanter Staysail Cutter
$109,000
Boat in Saint Helens, OR 97051 US
Built in 1980
Staysail Cutter
1 Engine (VOLVO PENTA)
43.3 feet
Diesel
Steel
THIS VESSEL IS A CANADIAN BUILT, DIESEL POWERED, OFFSHORE CRUISING PILOTHOUSE SAILBOAT. HER WELDED STEEL FULL DISPLACEMENT HULL HAS A STEEPLY RAKED STEM, BALLAST KEEL, "BREWER CUTAWAY" SKEG-HUNG RUDDER, ROUND CHINES AND REINFORCED REVERSE RAKED STERN. HER ALUMINUM MAST IS DECK-STEPPED WITH STAINLESS STEEL SHROUDS, INTERNAL CHAIN PLATES, AND A SINGLE SPREADER ARRANGEMENT. ALL SAILS ARE AT 90 PERCENT. THE FOREDECKS ARE CURVED OUTBOARD WITH A RAISED CABIN TRUNK AND PILOTHOUSE AFT. THERE ARE OUTBOARD WIDE SIDE DECKS WITH STAINLESS STEEL RAILINGS, STANCHIONS AND CABLE LIFELINES. THERE IS AN AFT OPEN COCKPIT WITH BENCH SEATING AND HELM PEDESTAL. THE CABIN INTERIOR IS ACCESSED THROUGH A COMPANIONWAY WITH HINGED TEAK DOORS AND SLIDING OVERHEAD HATCH. ENTERING INTO THE CABIN INTERIOR, THERE ARE AFT OPEN BERTHS PORT AND STARBOARD, GALLEY AND DINETTE SETTEE TO PORT ACROSS FROM A PAIR OF SWIVEL SEATS AND TABLE WITH AN INSIDE HELM STATION FORWARD TO STARBOARD. FORWARD IS A BERTH STARBOARD WITH HEAD COMPARTMENT TO PORT WITH A V-BERTH FORWARD.
THIS VESSEL IS IMMACUALTE INSIDE AND OUT. VERY WELL MAINTAINED.
PLEASE CALL THE LISTING BROKERS ON THEIR CELL PHONES TO SCHEDULE AN APPOINTMENT AS THIS VESSEL IS NOT LOCATED AT OUR OFFICE.
DENISE BROOKS - CELL: (503) 764-858EIGHT
TOM JORDAN - CELL: (503)310-688FOUR
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
VISANNI 120 VAC REFRIGERATOR POWERED BY A SMALL INVERTER AND SHOREPOWER AC. THERE IS AN ADDITIONAL INSULATED ICE BOX 3’ BY 5’ LOCATED BELOW THE CABON SOLE.
LPG STAINLESS STEEL TWO BURNER STOVE AND OVEN.
STAINLESS STEEL GALLEY SINK.
HULL DESIGN - FULL DISPLACEMENT WITH BALLAST KEEL AND SKEG RUDDER.
HULL MATERIAL - ELECTRICALLY WELDED STEEL PLATE, SHAPES, AND BAR WITH 1/4” PLATE BOTTOM AND 1/8” PLATES, DECKS, CABIN.
TANSOM - ELECTRICALLY WELDED STEEL TRANSOM HEAVILY REINFORCED WITH STRONGBACKS.
STEM - RAKED STEM
KEEL - STEEL BALLAST KEEL WELDED INTO THE HULL’S LAYUP.
BALLAST - 12,000LBS IRON AND CEMENT.
STRUCTURAL FRAMES - WELDED STEEL BAR AND SHAPES.
* THE ENTIRE HULL INTERIOR SURFACE ABOVE THE BILGES WERE SPRAY-ON FOAM INSULATED.
DECK MATERIAL - WELDED STEEL PLATING.
HULL-TO-DECK - WELDED JOINT.
SUPERSTRUCTURE MATERIAL - ELECTRICALLY WELDED STEEL PLATE AND SHAPES.
EXTERIOR SEATING - AFT COCKPIT WELDED STEEL BENCH SEATING.
EXTERIOR LIGHTING - SPREADER LIGHT AND AFT COCKPIT LED LIGHTING.
EXTERIOR WASHDOWN - RAW WATER WASHDOWN AFT COCKPIT AREA.
WINDOWS - “EASTMAN” CUSTOM MADE USCG-APPROVED OFFSHORE WINDOWS.
DECK RAILINGS - STAINLESS STEEL RAILINGS FORE AND AFT WITH CABLE LIFE-LINES.
BOW RAILING - STAINLESS STEEL BOW RAILINGS INTEGRATED INTO THE DECK RAILINGS.
DECK DRAINAGE - SELF BAILING DECK DRAINS AT THE PORT & STARBOARD AFT COCKPIT CORNERS. 3” DRAINS WERE ADDED TO ENHANCE THE EXISTING 1” DRAINS.
ANCHOR PLATFORM - STAINLESS STEEL FAIRLEADS WITH DOUBLE ANCHOR ROLLER CHUTES.
TENDER - 8’ SUMMERFIELD DINGHY.
HYDRAULIC STEERING.
LEWMAR WINCHES - #42 (2) EACH 2 SPEED, #30 (2) EACH 2 SPEED, #30 SINGLE AND #7 ON MAST 3 EACH.
ALUMINUM MAST AND BOOM.
1 1/4” STAINLESS STEEL SHAFT.
THREE BLADE, BRONZE ALLOY, 18” X 13 LH.
ANCHOR - GALVANIZED 45LBS PLOW ANCHOR.
GENTECH 1500W INVERTER.
30AMP SHORE POWER.
PRO SPORT 12V BATTERY CHARGER.
MASTER DOUBLE BERTH FORWARD.
TWO SINGLE BERTHS, PORT & STARBOARD AFT.
ONE SINGLE BERTH MID-SHIP.
MANUAL HEAD WITH SHOWER.
ICOM IC-M508 VHF RADIO
RAYMARINE ST6000 AUTOPILOT
RAYTHEON SL70 MARINE RADAR
RITCHIE COMPASS
LOWRANCE HDS 5 AND HDS 7 GPS/CHARTPLOTTER
RAYTHEON TRIDATA
Price History
| Date | Event | Price |
|---|---|---|
| 2/27/26 | Price decreased | $109,000(-12.8%) |
| 2/26/26 | Initial price | $125,000 |
Overview from around the web 1980 Kanter Staysail Cutter
Customers praise the 1980 Kanter Staysail Cutter for its classic design and solid craftsmanship, highlighting its sturdy construction and seaworthy performance
Many appreciate the cutter rig’s versatility, which offers excellent sail handling and balance, especially in challenging conditions. Owners often mention the spacious and well-laid-out interior, making it comfortable for extended cruising. The boat’s traditional aesthetic combined with practical features appeals to sailors looking for a reliable and timeless vessel. Overall, the 1980 Kanter Staysail Cutter receives positive feedback for being a dependable and enjoyable boat for both coastal and offshore adventures.
The Biggest Pros and Cons
The 1980 Kanter Staysail Cutter is a classic sailboat known for its traditional design and sturdy construction. Here are some of the pros and cons associated with this model:
Pros
Solid Build Quality: The Kanter Staysail Cutter is well-regarded for its robust fiberglass hull and quality craftsmanship, offering durability and longevity.
Traditional Aesthetic: Its classic lines and staysail cutter rig give it a timeless appeal that many sailing enthusiasts appreciate.
Versatile Sail Plan: The staysail cutter rig provides excellent balance and sail options, making it easier to handle in various wind conditions and ideal for cruising.
Comfortable Interior: The boat typically features a spacious and practical interior layout suitable for extended cruising.
Good Seaworthiness: Known for its stability and seaworthy design, it performs well in offshore conditions.
Cons
Older Design: Being a 1980 model, some design elements and onboard systems may feel dated compared to modern sailboats.
Maintenance Requirements: As with many older boats, ongoing maintenance and potential upgrades may be necessary to keep it in optimal condition.
Weight and Performance: The traditional full keel and heavier build can result in slower speeds and less agility compared to lighter, fin-keel sailboats.
Limited Modern Amenities: The boat may lack some of the contemporary conveniences and technology found in newer models.
Made For
The 1980 Kanter Staysail Cutter is ideal for sailors seeking a sturdy, classic cruising sailboat with traditional lines and exceptional seaworthiness. It is perfect for those who appreciate a well-built vessel capable of handling long-distance offshore passages while offering comfortable accommodations for extended voyages. This boat suits experienced sailors who value a manageable sail plan with a staysail cutter rig, providing versatility and balance in various wind conditions. Whether you're planning coastal cruising or bluewater adventures, the Kanter Staysail Cutter delivers reliability and charm for serious cruising enthusiasts.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Boat Location
Contact OREGON YACHT SALES, INC. about 1980 Kanter Staysail Cutter
865 N.E. Tomahawk Drive, Suite 103, Portland, OR, 97217
Login with Google
