2022 Jeanneau NC 1095 Boat in Shady Side, MD 20764 US
Built in 2022
NC 1095
2 Engines (2x Yamaha)
34 feet
Gas
Fiberglass/Reinforced
Overview
The Jeanneau NC 1095 has earned a reputation as one of the most versatile family cruisers in its class, combining the comfort of a true pilothouse with the performance and simplicity of twin outboards.
This exceptionally clean 2022 model has been freshly detailed, shows low engine hours, and is equipped with a generator along with reverse-cycle air conditioning and heat, making it equally enjoyable for summer weekends or extending your boating season well into the spring and fall.
A full cockpit enclosure creates additional protected living space while seamlessly connecting to the bright, open salon through the signature sliding glass doors.
Inside, the NC 1095's expansive windows and three-cabin design provide the comfort and functionality rarely found in a boat of this size. Wide side decks, the sliding helm door, and generous cockpit make docking, entertaining, and spending time on the water effortless for both experienced and new owners alike.
If you're looking for a low-hour NC 1095 ready for its next adventure, this boat deserves a closer look.
Features
- Cockpit Enclosure
- Twin Yamaha Engines
- Bow Thruster
- Diesel Generator
- Reverse-Cycle Air Conditioning
- Zipwake Trim Tabs
- Bow Sun Pad
- And More!
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 8/18/26 | Initial price | $299,900 |
Videos from Clarks Landing Yacht Sales MD on this 2022 Jeanneau NC 1095
Jeanneau NC 1095: BoatTEST Review
Overview
The Jeanneau NC 1095 is a versatile outboard cruiser that continues the evolution of the popular NC line, following the NC 895 model. This 34-foot 5-inch vessel is designed to combine performance, ergonomic design, and practical features for cruising comfort and ease of operation.
Exterior Design and Operational Features
The NC 1095 features twin 300 horsepower Yamaha four-stroke outboard engines, paired with 15-inch saltwater series propellers, delivering a top speed of 40.2 miles per hour at 6,000 RPM. The boat’s beam measures 10 feet 11 inches with a draft of 2 feet 3 inches, and it has an empty weight of 10,225 pounds. Fuel capacity totals 212 gallons, supporting extended cruising ranges. The foredeck is equipped with a recessed ground tackle system, including a horizontally mounted Lumar windlass and a galvanized anchor on a polished stainless steel roller. Safety and convenience are enhanced by a 24-inch high bow rail with a 16-inch split and a mid-rail on the bow for additional security. Cleats are mounted on the cap rail and mid-chine, facilitating easy line handling without the need for chocks. Line storage is conveniently located near the starboard side deck step.
Helm and Deck Ergonomics
The helm station is positioned on the starboard side and features a tinted brow over the panel, a centrally mounted 12-inch display, and a stereo system above the Yamaha engine display. Controls are thoughtfully arranged, including trim tab rockers, bow thruster control, and electrical switches that eliminate the need for a separate breaker panel. Engine controls are mounted at an angle for ergonomic access, with a fixed steering wheel base standard and tilt as an option. The VHF radio is mounted overhead to the right, keeping the microphone wire out of the operator’s line of sight. The helm seat is a newly designed, well-padded bucket seat with a flip bolster, fore and aft sliding capability, and a footrest for comfort during extended operation. Twin pantographed windshields with integrated washers provide clear visibility, separated by a narrow mullion. A notable design feature is the opening side door on the starboard side, allowing quick access to the side deck for docking or line handling, complemented by a port side window that provides easy reach to the midship cleat.
Performance and Handling
During sea trials with an estimated test weight of 12,590 pounds (including half fuel and three people), the NC 1095 demonstrated strong performance characteristics. It reached planing speed in 3.9 seconds, accelerated to 20 miles per hour in 5.6 seconds, and achieved 30 miles per hour in 9.4 seconds. Best cruising speed was recorded at 26.1 miles per hour at 4,000 RPM, with a fuel burn of 22.4 gallons per hour, resulting in a fuel efficiency of approximately 1.2 miles per gallon and a cruising range of 222 statute miles while maintaining a 10% fuel reserve. The boat exhibits some torque steer during acceleration, which diminishes as speed increases and trim is adjusted to about half or slightly more. The NC 1095 runs flat and stable without the need for trim tab adjustments, providing a smooth and dry ride in calm conditions. Maneuverability is excellent, though care is advised when docking due to the rails being mounted outside the hull, which may contact pilings before the rub rail.
Systems and Maintenance Access
The NC 1095 offers practical access points for maintenance and operational convenience. Shore power connectivity is located at the port transom, and an optional generator can be installed in a dedicated cockpit hatch. Battery access is straightforward, with surrounding hatches providing access to fuel filters and individual fuel tanks. The transom hatch reveals the stringers and engine plate bolts, showcasing attention to structural detail. Inside the salon, the main breaker panel is easily accessible, with additional 10-volt breakers located under the table in the bulwarks. A hatch in the stateroom allows access to the back of the helm console for servicing electronics and controls.
Conclusion
The Jeanneau NC 1095 is a well-rounded outboard cruiser that excels in handling, ergonomic design, and operational versatility. Its thoughtful layout, combined with strong performance and practical maintenance access, makes it a compelling choice for those seeking a capable and comfortable cruiser. The design details, such as the opening side door and accessible cleats, reflect Jeanneau’s commitment to user-friendly features. Overall, the NC 1095 delivers a balanced package for cruising enthusiasts.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Maryland, United States Similar to the 2022 Jeanneau NC 1095
Compare with similar boats and find the perfect one for you.
 2022 Jeanneau NC 1095 | ||||||
|---|---|---|---|---|---|---|
| Price | $299,900 | $274,000 | $329,000 | $187,127 | $159,000 | $149,888 |
| Location | Shady Side | Tracys Landing | Annapolis | Grasonville | Grasonville | Deale |
| Nominal Length | 34' | 34' | 37' | 31' | 21' | 36' |
| Engine Make | Yamaha | Yamaha | Volvo | Yamaha | Yamaha | Volvo |
| Total Engine Power | 300 hp | 300 hp | 270 hp | 250 hp | 250 hp | 380 hp |
| Days on Market | 22 | 25 | 566 | 120 | 22 | 333 |
| Get in touch |
Other Jeanneau boats for sale in Maryland, United States
Meet the Broker
Address
Boat Location
Contact Clarks Landing Yacht Sales MD about 2022 Jeanneau NC 1095
1442 Ford Road, Shady Side, MD, 20764
Login with Google