2022 Jeanneau NC 1095 Boat in Fort Lauderdale, FL 33301 US
NC 1095
2 Engines (2x Mercury Verado)
34 feet
Gas
Fiberglass/Reinforced
2022 Jeanneau NC 1095 Coupe - Low Hours & Excellent Condition
LOW HOURS • VERY WELL MAINTAINED • HIGHLY EQUIPPED
This 2022 Jeanneau NC 1095 Coupe is a fantastic opportunity to own a highly desirable cruising yacht that has been very well maintained and shows in excellent condition. With low engine hours and an impressive list of options, she is ready to provide years of comfortable cruising and enjoyment.
The NC 1095 Coupe is designed for both comfort and versatility, offering a spacious and bright interior, a welcoming salon, comfortable accommodations, and excellent outdoor living areas. Whether you're planning family cruising, weekend getaways, or longer trips, the NC 1095 offers the perfect combination of style, comfort, and practicality.
Power & Performance
Powered by twin Mercury Verado 300 XXL Cold Fusion engines with JPO (2 x 300 HP), this NC 1095 delivers strong performance, smooth handling, and excellent maneuverability. The bow thruster and Zipwake trim tabs make docking and cruising even easier.
Ready for Her Next Owner
This 2022 Jeanneau NC 1095 Coupe stands out with its low hours, excellent condition, desirable Coupe configuration, and extensive equipment list. It is an excellent choice for anyone looking for a comfortable, versatile, and well-equipped cruising yacht without the wait for a new build.
Low-hour NC 1095 Coupes in this condition and with this level of equipment are not often available.
Contact me today to schedule a private showing or to receive the complete specifications and equipment list.
- Premiere Trim Level
- Comfort Pack
- Electronics Package Upgrade
- Audio Pack
- Mooring Kit
- Anchoring Kit
- U-Cockpit Sun Awning – Graphite
- Roof Storage Rack for Stand-Up Paddle Boards
- 2 Rod Holders
- Front Sundeck with Lifting Backrest
- Bow Thruster
- Additional Water Tank
- Panda 6.4 kVA Diesel Generator
- Underwater Lights
- Additional Refrigerator in Storage Compartment
- Microwave Oven
- Vitroceramic Cooktop
- 32,000 BTU Air Conditioning
- Mattress for 3rd Cabin
- Filler Cushion for Salon Table
- Overhead Lockers Above Galley – Starboard
- Overhead Lockers in Forward Cabin
- Cockpit Salon with Table & Sundeck
- Zipwake Trim Tabs
- TV/DVD Pre-Wiring
- Garmin VHF 215
- Horn
- Trailer Ring
- TV Antenna
Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 9/23/26 | Initial price | $349,000 |
2022 Jeanneau NC 1095 Video Tours
Overview
The Jeanneau NC 1095 is a versatile outboard cruiser that continues the evolution of the popular NC line, following the NC 895 model. This 34-foot 5-inch vessel is designed to combine performance, ergonomic design, and practical features for cruising comfort and ease of operation.
Exterior Design and Operational Features
The NC 1095 features twin 300 horsepower Yamaha four-stroke outboard engines, paired with 15-inch saltwater series propellers, delivering a top speed of 40.2 miles per hour at 6,000 RPM. The boat’s beam measures 10 feet 11 inches with a draft of 2 feet 3 inches, and it has an empty weight of 10,225 pounds. Fuel capacity totals 212 gallons, supporting extended cruising ranges. The foredeck is equipped with a recessed ground tackle system, including a horizontally mounted Lumar windlass and a galvanized anchor on a polished stainless steel roller. Safety and convenience are enhanced by a 24-inch high bow rail with a 16-inch split and a mid-rail on the bow for additional security. Cleats are mounted on the cap rail and mid-chine, facilitating easy line handling without the need for chocks. Line storage is conveniently located near the starboard side deck step.
Helm and Deck Ergonomics
The helm station is positioned on the starboard side and features a tinted brow over the panel, a centrally mounted 12-inch display, and a stereo system above the Yamaha engine display. Controls are thoughtfully arranged, including trim tab rockers, bow thruster control, and electrical switches that eliminate the need for a separate breaker panel. Engine controls are mounted at an angle for ergonomic access, with a fixed steering wheel base standard and tilt as an option. The VHF radio is mounted overhead to the right, keeping the microphone wire out of the operator’s line of sight. The helm seat is a newly designed, well-padded bucket seat with a flip bolster, fore and aft sliding capability, and a footrest for comfort during extended operation. Twin pantographed windshields with integrated washers provide clear visibility, separated by a narrow mullion. A notable design feature is the opening side door on the starboard side, allowing quick access to the side deck for docking or line handling, complemented by a port side window that provides easy reach to the midship cleat.
Performance and Handling
During sea trials with an estimated test weight of 12,590 pounds (including half fuel and three people), the NC 1095 demonstrated strong performance characteristics. It reached planing speed in 3.9 seconds, accelerated to 20 miles per hour in 5.6 seconds, and achieved 30 miles per hour in 9.4 seconds. Best cruising speed was recorded at 26.1 miles per hour at 4,000 RPM, with a fuel burn of 22.4 gallons per hour, resulting in a fuel efficiency of approximately 1.2 miles per gallon and a cruising range of 222 statute miles while maintaining a 10% fuel reserve. The boat exhibits some torque steer during acceleration, which diminishes as speed increases and trim is adjusted to about half or slightly more. The NC 1095 runs flat and stable without the need for trim tab adjustments, providing a smooth and dry ride in calm conditions. Maneuverability is excellent, though care is advised when docking due to the rails being mounted outside the hull, which may contact pilings before the rub rail.
Systems and Maintenance Access
The NC 1095 offers practical access points for maintenance and operational convenience. Shore power connectivity is located at the port transom, and an optional generator can be installed in a dedicated cockpit hatch. Battery access is straightforward, with surrounding hatches providing access to fuel filters and individual fuel tanks. The transom hatch reveals the stringers and engine plate bolts, showcasing attention to structural detail. Inside the salon, the main breaker panel is easily accessible, with additional 10-volt breakers located under the table in the bulwarks. A hatch in the stateroom allows access to the back of the helm console for servicing electronics and controls.
Conclusion
The Jeanneau NC 1095 is a well-rounded outboard cruiser that excels in handling, ergonomic design, and operational versatility. Its thoughtful layout, combined with strong performance and practical maintenance access, makes it a compelling choice for those seeking a capable and comfortable cruiser. The design details, such as the opening side door and accessible cleats, reflect Jeanneau’s commitment to user-friendly features. Overall, the NC 1095 delivers a balanced package for cruising enthusiasts.
Overview from around the web 2022 Jeanneau NC 1095
The 2022 Jeanneau NC 1095 has received rave reviews from customers who appreciate its blend of style, comfort, and functionality
Many users have praised its spacious interior, which features ample natural light and thoughtful layouts, making it ideal for both relaxation and entertaining. Boat enthusiasts highlight the impressive performance of its twin-engine setup, allowing for smooth cruising on various waters. The modern design, characterized by a sleek exterior and contemporary finishes, appeals to those looking for both elegance and practicality. Customers also note the NC 1095's user-friendly features, such as the panoramic windows that enhance the connection to the surroundings, and the well-equipped galley that makes onboard cooking a pleasure. The boat's versatility for day trips or longer adventures has been appreciated, with plenty of storage for gear and additional amenities for extended stays. Safety and maneuverability are frequently mentioned, with many praising the boat’s stability and ease of handling. Overall, the 2022 Jeanneau NC 1095 has garnered enthusiastic feedback as a well-crafted vessel that meets the demands of both seasoned sailors and newcomers alike.
Made For
The 2022 Jeanneau NC 1095 is designed for a diverse range of boating enthusiasts. This model is ideal for families seeking adventure, as it offers spacious accommodations and versatile living spaces for memorable weekend getaways. It caters to couples looking for a comfortable and stylish escape on the water, providing ample room for relaxation and entertainment. Additionally, the NC 1095 appeals to seasoned boaters who appreciate quality craftsmanship and innovative design, featuring advanced technology and efficient performance for ease of navigation. With its robust construction and sea-worthy design, this boat is perfect for those who want to explore coastal waters, enjoy leisurely cruises, or engage in water sports. Whether you are a novice or an experienced maritime explorer, the Jeanneau NC 1095 stands out as an exceptional choice for creating unforgettable experiences on the water.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Florida, United States Similar to the 2022 Jeanneau NC 1095
Compare with similar boats and find the perfect one for you.
2022 Jeanneau NC 1095 | ||||||
|---|---|---|---|---|---|---|
| Price | $349,000 | $375,000 | $315,000 | $298,999 | $294,900 | $289,900 |
| Location | Fort Lauderdale | Fernandina Beach | Stuart | Bonita Springs | Miami | Boynton Beach |
| Nominal Length | 34' | 35' | 35' | 29' | 38' | 34' |
| Engine Make | Mercury Verado | Yamaha | Mercury | Yamaha | Volvo | Yamaha |
| Total Engine Power | 300 hp | 300 hp | 300 hp | - | 260 hp | 300 hp |
| Days on Market | 1 | 139 | 107 | 31 | 13 | 338 |
| Get in touch |
Other 2022 Jeanneau NC 1095 For Sale in Florida, United States
Other Jeanneau NC 1095 boats for sale in Florida, United States
Other Jeanneau boats for sale in Florida, United States
Meet the Broker

Address
Other Information about InterMarine
InterMarine is an award-winning boat dealer specializing in the sale and service of quality new boats and used boats of all shapes and sizes. We are proudly appointed dealers for Cranchi, Prestige, Beneteau, Jeanneau Power Boats, Chaparral, Four Winns, NAVAN, and Bayliner. We service all of South Florida, along with catering to an international clientele. Our philosophy is simple: Our customers are the most important part of our business!
Want to update the details or images for this boat? Claim this listing by getting in touch.
Boat Location
Contact InterMarine about 2022 Jeanneau NC 1095
4550 Anglers Avenue, Fort Lauderdale, FL, 33312






































