2020 Jeanneau NC 1095 Boat in Redondo Beach, CA 90277 US
Built in 2020
NC 1095
2 Engines (2x Yamaha)
34.4 feet
Gas
Fiberglass/Reinforced
Discover the NC 1095, the flagship of the NC line. At 35 feet, the NC 1095 is the perfect family cruiser, ideal for a weekend away or simply a day on the water. Like all Jeanneaus, the NC 1095 has been designed for life underway and includes some clever features like recessed side-decks allowing for safe movement about the boat with easy access to the helm. A large L-shaped lounge comfortably fits a large group and easily converts into a large lounging area. Large transom platforms on either side of the outboard engines, make boarding safe and easy. To fully enjoy life on the water, the forward sundeck with its lifting back rests, provides for additional living space while on deck.
The interior of the NC 1095 with its opening sunroofs and large windows in the hull, allow for plenty of natural lighting. The galley is large and fully functional: here again, a surprising amount of storage space is available in both upper and lower cabinets, allowing you to store everything for your time on the water. Galley has stove, refrigerator, sink, and microwave.
This NC 1095 is offered in a 3 cabin version. A nicely appointed owner's cabin forward complete with large center-line bed, easy access to head and shower, two overhead hatches, and long windows down each side, greatly enhance the overall comfort for the master of the ship. The guest cabin to port, rounds out this truly liveable interior allowing two guests to join in total comfort. A third cabin to starboard can be utilized as either an additional double berth, or simply additional storage, which is always in high demand on board.
Key Features
- Modular cockpit with easy side access
- Recessed side-deck on starboard
- Aft sliding side door and skylights
- 3rd cabin
- Optimized storage spaces throughout
- Sliding side door at the helm
- Bow Thruster
- Three Zone climate control with air conditioning and heat
- Heating system
- Panda Generator
- Cockpit sun awning
- Teak Side Cockpit
- Fusion Stereo
- Bow Cushions with sun pad
- Single Point engine flushing system
Murrell Yachts offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 9/30/26 | Initial price | $299,000 |
2020 Jeanneau NC 1095 Video Tours
Jeanneau NC 1095: BoatTEST Review
Overview
The Jeanneau NC 1095 is a versatile outboard cruiser that continues the evolution of the popular NC line, following the NC 895 model. This 34-foot 5-inch vessel is designed to combine performance, ergonomic design, and practical features for cruising comfort and ease of operation.
Exterior Design and Operational Features
The NC 1095 features twin 300 horsepower Yamaha four-stroke outboard engines, paired with 15-inch saltwater series propellers, delivering a top speed of 40.2 miles per hour at 6,000 RPM. The boat’s beam measures 10 feet 11 inches with a draft of 2 feet 3 inches, and it has an empty weight of 10,225 pounds. Fuel capacity totals 212 gallons, supporting extended cruising ranges. The foredeck is equipped with a recessed ground tackle system, including a horizontally mounted Lumar windlass and a galvanized anchor on a polished stainless steel roller. Safety and convenience are enhanced by a 24-inch high bow rail with a 16-inch split and a mid-rail on the bow for additional security. Cleats are mounted on the cap rail and mid-chine, facilitating easy line handling without the need for chocks. Line storage is conveniently located near the starboard side deck step.
Helm and Deck Ergonomics
The helm station is positioned on the starboard side and features a tinted brow over the panel, a centrally mounted 12-inch display, and a stereo system above the Yamaha engine display. Controls are thoughtfully arranged, including trim tab rockers, bow thruster control, and electrical switches that eliminate the need for a separate breaker panel. Engine controls are mounted at an angle for ergonomic access, with a fixed steering wheel base standard and tilt as an option. The VHF radio is mounted overhead to the right, keeping the microphone wire out of the operator’s line of sight. The helm seat is a newly designed, well-padded bucket seat with a flip bolster, fore and aft sliding capability, and a footrest for comfort during extended operation. Twin pantographed windshields with integrated washers provide clear visibility, separated by a narrow mullion. A notable design feature is the opening side door on the starboard side, allowing quick access to the side deck for docking or line handling, complemented by a port side window that provides easy reach to the midship cleat.
Performance and Handling
During sea trials with an estimated test weight of 12,590 pounds (including half fuel and three people), the NC 1095 demonstrated strong performance characteristics. It reached planing speed in 3.9 seconds, accelerated to 20 miles per hour in 5.6 seconds, and achieved 30 miles per hour in 9.4 seconds. Best cruising speed was recorded at 26.1 miles per hour at 4,000 RPM, with a fuel burn of 22.4 gallons per hour, resulting in a fuel efficiency of approximately 1.2 miles per gallon and a cruising range of 222 statute miles while maintaining a 10% fuel reserve. The boat exhibits some torque steer during acceleration, which diminishes as speed increases and trim is adjusted to about half or slightly more. The NC 1095 runs flat and stable without the need for trim tab adjustments, providing a smooth and dry ride in calm conditions. Maneuverability is excellent, though care is advised when docking due to the rails being mounted outside the hull, which may contact pilings before the rub rail.
Systems and Maintenance Access
The NC 1095 offers practical access points for maintenance and operational convenience. Shore power connectivity is located at the port transom, and an optional generator can be installed in a dedicated cockpit hatch. Battery access is straightforward, with surrounding hatches providing access to fuel filters and individual fuel tanks. The transom hatch reveals the stringers and engine plate bolts, showcasing attention to structural detail. Inside the salon, the main breaker panel is easily accessible, with additional 10-volt breakers located under the table in the bulwarks. A hatch in the stateroom allows access to the back of the helm console for servicing electronics and controls.
Conclusion
The Jeanneau NC 1095 is a well-rounded outboard cruiser that excels in handling, ergonomic design, and operational versatility. Its thoughtful layout, combined with strong performance and practical maintenance access, makes it a compelling choice for those seeking a capable and comfortable cruiser. The design details, such as the opening side door and accessible cleats, reflect Jeanneau’s commitment to user-friendly features. Overall, the NC 1095 delivers a balanced package for cruising enthusiasts.
Overview from around the web 2020 Jeanneau NC 1095
The 2020 Jeanneau NC 1095 has garnered praise from customers for its innovative design and impressive comfort
Boaters appreciate the spacious layout, with ample living space both inside and out. The twin engines provide excellent performance, making it suitable for both leisurely cruising and more adventurous outings. Customers often highlight the large, well-appointed cockpit and the inviting salon, which creates a perfect space for entertaining or relaxing with family and friends. The large windows and sliding doors enhance the connection with the surrounding environment, flooding the interior with natural light. Many users also commend the well-designed helm, which provides excellent visibility and easy access to controls. Additionally, the generous storage options and versatile sleeping arrangements make it a great choice for families or those looking to enjoy extended stays on the water. Overall, the Jeanneau NC 1095 delivers a blend of elegance, practicality, and performance, making it a favored option among those seeking a reliable and stylish motor cruiser.
Made For
The 2020 Jeanneau NC 1095 is designed for a wide range of boating enthusiasts, particularly those seeking a versatile and spacious family cruiser. Ideal for families and small groups, this boat offers comfort and convenience for day trips, extended weekends, or even longer voyages. Its thoughtful layout caters well to those who enjoy entertaining, providing ample space for socializing both inside and out. The panoramic windows and open cockpit design create a light and airy atmosphere, making it perfect for enjoying scenic views with loved ones. Additionally, its robust performance appeals to avid boaters looking for a reliable vessel that balances agility on the water with stability. Whether you’re a seasoned mariner or a newcomer looking to explore the joys of cruising, the Jeanneau NC 1095 provides an exceptional blend of luxury and functionality to enhance your boating experience.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in California, United States Similar to the 2020 Jeanneau NC 1095
Compare with similar boats and find the perfect one for you.
 2020 Jeanneau NC 1095 | ||||||
|---|---|---|---|---|---|---|
| Price | $299,000 | $290,000 | $220,000 | $199,000 | $179,000 | $425,000 |
| Location | Redondo Beach | Oxnard | West Sacramento | Huntington Beach | Redondo Beach | San Diego |
| Nominal Length | 34' | 44' | 44' | 36' | 30' | 38' |
| Engine Make | Yamaha | Cummins | Volvo Penta | Volvo | Yamaha | Mercury |
| Total Engine Power | 300 hp | 500 hp | 480 hp | 220 hp | 200 hp | 350 hp |
| Days on Market | 3 | 176 | 247 | 68 | 117 | 139 |
| Get in touch |
Other Jeanneau boats for sale in California, United States
Meet the Broker
Address
Want to update the details or images for this boat? Claim this listing by getting in touch.
Boat Location
Contact Murrell Yachts about 2020 Jeanneau NC 1095
4514 Spencer St, Torrance, CA, 90503
Login with Google