2020 Jeanneau NC 1095 Boat in Jacksonville, FL 32202 US
Built in 2020
NC 1095
2 Engines (2x Yamaha)
34.4 feet
--
Fiberglass/Reinforced
Jeanneau NC 1095 | Low Hours, Beautifully Presented, Ready to Cruise
This beautifully maintained Jeanneau NC 1095 offers exceptional value for buyers seeking a comfortable, versatile cruiser with remarkably light use. Her distinctive blue hull has been regularly waxed and kept undercover, preserving a sparkling gelcoat finish that reflects the care she has received.
Powered by Yamaha outboards with just 127 hours, she combines low engine hours with regular servicing of both the engines and generator. Her overnight accommodations remain notably fresh-the berths have never been slept in-making this an appealing opportunity for an owner ready to begin enjoying life aboard.
Designed for relaxed cruising and entertaining, the NC 1095 makes impressive use of her space. Large windows bring natural light into the enclosed salon, while the practical galley and inviting seating create a comfortable setting for meals, conversation, or a quiet afternoon on the water. The connection between the interior and generous aft cockpit makes it easy to enjoy both sheltered comfort and open-air living. Thoughtful storage and well-proportioned accommodations further enhance the model's appeal for weekends away and longer coastal adventures.
Whether your plans include exploring the coast, anchoring out with family, or entertaining friends closer to home, this NC 1095 offers a compelling combination of cruising comfort, thoughtful design, and carefully maintained condition.
Located in Jacksonville, Florida, she is ready to go and conveniently available for viewing. Step aboard now and make plans to be on the water before Christmas.
Please see the full listing for the complete equipment inventory and additional specifications.
Original Build Sheet
* UPGRADE LEGEND VERSION (BLUE HULL)
* YAMAHA TWIN F300 HP ELECTRIC
Options
* TRIM LEVEL PREMIERE 2019 USA
2 CLEATS FOR CROSSED MOORING
ELECTRICAL VERTICAL WINDLASS
COCKPIT SHOWER (HOT WATER)
WATER HEATER 110v
LED LIGHTING IN WHEELHOUSE AND CABINS
LED LIGHTS IN COCKPIT FLOOR
INTERIOR CURTAINS
ELECTRICAL TRIM TABS
* COMFORT PACK
* ELECTRONIC PACK 2019 UPGRADED
* AUDIO PACK 2019 FUSION RA70N
* MOORING KIT
* ANCHORING KIT
* U-SHAPE COCKPIT SALON + TABLE + SUNDECK COMPLEMENT
* FRONT SUNDECK WITH LIFTING BACKRESTS
* BOW THRUSTER
* GENERATOR PANDA DIESEL 6.4KVA 115V
* DECK SEARCHLIGHT
* MICROWAVE OVEN 115V
* 110V VITROCERAMIC COOKTOP
* AIR CONDITIONING 110V 60HZ 28000 BTU
* CONVERTIBLE SALON TABLE
* OVERHEAD LOCKERS IN GALLEY
* OVERHEAD LOCKERS IN THE FRONT CABIN
* PRE-RIGGING YAMAHA (TWIN 225-300 HP) ELECTRIC + 6YC DISPLAY
* VHF GARMIN 215 US
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 11/7/26 | Initial price | $290,000 |
Jeanneau NC 1095: BoatTEST Review
Overview
The Jeanneau NC 1095 is a versatile outboard cruiser that continues the evolution of the popular NC line, following the NC 895 model. This 34-foot 5-inch vessel is designed to combine performance, ergonomic design, and practical features for cruising comfort and ease of operation.
Exterior Design and Operational Features
The NC 1095 features twin 300 horsepower Yamaha four-stroke outboard engines, paired with 15-inch saltwater series propellers, delivering a top speed of 40.2 miles per hour at 6,000 RPM. The boat’s beam measures 10 feet 11 inches with a draft of 2 feet 3 inches, and it has an empty weight of 10,225 pounds. Fuel capacity totals 212 gallons, supporting extended cruising ranges. The foredeck is equipped with a recessed ground tackle system, including a horizontally mounted Lumar windlass and a galvanized anchor on a polished stainless steel roller. Safety and convenience are enhanced by a 24-inch high bow rail with a 16-inch split and a mid-rail on the bow for additional security. Cleats are mounted on the cap rail and mid-chine, facilitating easy line handling without the need for chocks. Line storage is conveniently located near the starboard side deck step.
Helm and Deck Ergonomics
The helm station is positioned on the starboard side and features a tinted brow over the panel, a centrally mounted 12-inch display, and a stereo system above the Yamaha engine display. Controls are thoughtfully arranged, including trim tab rockers, bow thruster control, and electrical switches that eliminate the need for a separate breaker panel. Engine controls are mounted at an angle for ergonomic access, with a fixed steering wheel base standard and tilt as an option. The VHF radio is mounted overhead to the right, keeping the microphone wire out of the operator’s line of sight. The helm seat is a newly designed, well-padded bucket seat with a flip bolster, fore and aft sliding capability, and a footrest for comfort during extended operation. Twin pantographed windshields with integrated washers provide clear visibility, separated by a narrow mullion. A notable design feature is the opening side door on the starboard side, allowing quick access to the side deck for docking or line handling, complemented by a port side window that provides easy reach to the midship cleat.
Performance and Handling
During sea trials with an estimated test weight of 12,590 pounds (including half fuel and three people), the NC 1095 demonstrated strong performance characteristics. It reached planing speed in 3.9 seconds, accelerated to 20 miles per hour in 5.6 seconds, and achieved 30 miles per hour in 9.4 seconds. Best cruising speed was recorded at 26.1 miles per hour at 4,000 RPM, with a fuel burn of 22.4 gallons per hour, resulting in a fuel efficiency of approximately 1.2 miles per gallon and a cruising range of 222 statute miles while maintaining a 10% fuel reserve. The boat exhibits some torque steer during acceleration, which diminishes as speed increases and trim is adjusted to about half or slightly more. The NC 1095 runs flat and stable without the need for trim tab adjustments, providing a smooth and dry ride in calm conditions. Maneuverability is excellent, though care is advised when docking due to the rails being mounted outside the hull, which may contact pilings before the rub rail.
Systems and Maintenance Access
The NC 1095 offers practical access points for maintenance and operational convenience. Shore power connectivity is located at the port transom, and an optional generator can be installed in a dedicated cockpit hatch. Battery access is straightforward, with surrounding hatches providing access to fuel filters and individual fuel tanks. The transom hatch reveals the stringers and engine plate bolts, showcasing attention to structural detail. Inside the salon, the main breaker panel is easily accessible, with additional 10-volt breakers located under the table in the bulwarks. A hatch in the stateroom allows access to the back of the helm console for servicing electronics and controls.
Conclusion
The Jeanneau NC 1095 is a well-rounded outboard cruiser that excels in handling, ergonomic design, and operational versatility. Its thoughtful layout, combined with strong performance and practical maintenance access, makes it a compelling choice for those seeking a capable and comfortable cruiser. The design details, such as the opening side door and accessible cleats, reflect Jeanneau’s commitment to user-friendly features. Overall, the NC 1095 delivers a balanced package for cruising enthusiasts.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Florida, United States Similar to the 2020 Jeanneau NC 1095
Compare with similar boats and find the perfect one for you.
 2020 Jeanneau NC 1095 | ||||||
|---|---|---|---|---|---|---|
| Price | $290,000 | $295,000 | $295,000 | $299,000 | $274,000 | $258,000 |
| Location | Jacksonville | Boynton Beach | Fort Lauderdale | Miami | Punta Gorda | Boynton Beach |
| Nominal Length | 34' | 34' | 34' | 37' | 34' | 34' |
| Engine Make | Yamaha | Mercury | Mercury Verado | Volvo | Yamaha | Yamaha |
| Total Engine Power | 300 hp | 300 hp | 300 hp | 270 hp | 300 hp | 300 hp |
| Days on Market | 2 | 16 | 45 | 229 | 480 | 382 |
| Get in touch |
Other 2020 Jeanneau NC 1095 For Sale in Florida, United States
Other Jeanneau NC 1095 boats for sale in Florida, United States
Other Jeanneau boats for sale in Florida, United States
Meet the Broker
Address
Want to update the details or images for this boat? Claim this listing by getting in touch.
Boat Location
Contact Dunbar Yachts about 2020 Jeanneau NC 1095
115 Marina Dr, St. Simons Island, GA, 31522
Login with Google