2026 Everglades 315 Center Console Boat in Boca Raton, FL 33432 US
315 Center Console
2 Engines (2x Mercury)
31.5 feet
Gas
Fiberglass/Reinforced
Twin Mercury 400 V10 | Bow-to-Stern Warranty Through 2033 | Seakeeper 2
Preliminary listing. More photos coming soon.
This 2026 Everglades 315 CC was delivered new in February 2026 and has approximately 220 hours. It comes with a 7-year bow-to-stern warranty through March 2033, a lifetime hull warranty, and an Ameritrail trailer. The first owner has already taken the depreciation, so the next owner gets a near-new, fully loaded Everglades without paying new-boat money.
Covered Bow to Stern Through 2033
The 7-year bow-to-stern warranty runs through March 2033. It covers the engines, Seakeeper, Garmin electronics, radar, FLIR, and everything else on board. The hull also has a lifetime warranty. Coverage like that is rare on a pre-owned boat.
Stabilized and Smooth
The Seakeeper 2 gyro cuts roll at rest. Seakeeper Ride replaces conventional trim tabs and actively manages pitch and roll underway. Together they give you a ride and a fishing platform you won't find on most boats this size.
Twin Mercury 400 V10 with Joystick
800 horsepower of Mercury V10 power comes paired with joystick piloting and autopilot, so docking and holding position over a spot are simple, even shorthanded. The engines have approximately 220 hours and plenty of life left.
Ready to Fish
It's rigged with Gemlux 18' outriggers with double rigging, a rigging station with a chiller plate, rod holders in the forward console, and a trolling motor pre-rig. It's set up to fish from day one.
- 7-Year Bow-to-Stern Warranty Through March 2033 (Engines, Seakeeper, Garmin, Radar, FLIR & More)
- Lifetime Hull Warranty
- 2026 Model Year, Delivered February 2026
- Approximately 220 Engine Hours
- Twin Mercury 400 V10 Outboards (800 HP Total)
- Joystick Piloting & Autopilot for Twin Mercury
- Seakeeper 2 Gyro Stabilizer
- Seakeeper Ride 600 Trim Tab System
- Garmin Electronics Upgraded to 22" Multifunction Displays
- Radar
- FLIR Thermal Camera
- Ameritrail Trailer Included
- Full Hull Color
- Garmin Elite Electronics Package with VHF
- GXM 54 SiriusXM & Weather Receiver
- Premium Audio Package
- Gemlux 18' Outriggers with Double Rigging
- Rigging Station with Mezzanine Chiller Plate
- Rod Holders in Forward Console
- Trolling Motor Pre-Rig
- Lumitec 18" Lightbar + Set of 3 Spotlights
- Spectrum Quattro RGBW Underwater Lights
- Engine Flushing System
Additional highlights include:
- Helm Seat Upgrade: Two Release Marine Seats with Teak
- Solid White Upholstery
- Mediterranean Bow Shade (White)
- Console Cover & Forward Console Canvas (Black)
Unsinkable
Lifetime hull warranty and 3 year component warranty
Variable deadrise deep V-hull
Patented closed molded RAMCAP® construction process with high density, closed cell, structural foam flotation
NMMA Certified
Self-bailing cockpit
No wood construction
Hull laminate - premium gel coat, vinyl-ester barrier and knitted bi-axial fiberglass
High density composite transom
Hull liner and deck mated perfectly for a rigid one-piece construction, adding to its long term durability
Hull liner finished inside
Molded-in diamond non-skid
ABS backing used to receive self tapping screws and bolts
Aluminum framework - custom fabricated meeting stringent standards, sand blasted then powder coated using premium marine grade materials
Gunwale boards - all hand laid and extra heavy duty
Wire harnesses - manufactured in-house using marine grade, tinned copper wire, high grade heat shrink connectors and waterproof deutsch plugs
Torque spec tightening on all terminals
Circuit protection - circuit breakers or fuses protect all electrical circuits
Heavy-duty rub rail with 316 stainless steel insert and end caps
316 Cast stainless steel and chrome plated fasteners for additional corrosion and stain resistance
All hardware bedded or gasketed to resist corrosion
Upholstery – extra heavy vinyl with acrylic top coat, Tenara thread, and anti-mildew backing – adhered to high density plastic backing (no wood) with flow through foam cushions
Bonding zinc plate
Heavy-duty, welded bow and stern eyes, bedded and sealed in polyurethane
Bronze high speed intake strainers
Console glove box/storage bin
Console handrail
Digital Switching with touch screen control
Console power port & USB charging ports
Stainless steel drink holders (2)
Recessed storage area on helm face, recessed storage area on dash top with inductive cell phone chargers (2)
Stainless steel steering wheel
Integrated hardtop & windshield frame
Patented sliding windshield with tempered glass & intelligent wiper and wash system
Footrest at helm
Fiberglass hardtop with molded in handrail & drainage trough, aluminum powder-coated frame with hand holds, overhead LED lights (4), spreader lights (4), electronics access hatch, rod holders (6)
Canvas life jacket storage in hardtop
Light bar – 18” low profile hardtop mounted
Head compartment with sink, toilet, teak head cover, holding tank, macerator, lighting, in floor storage with hatch, flooring, retaining rail, teak storage shelf, openingportlight, & lockable door
Cushioned forward console lounge seating with armrests, cup holders (2) & extra large storage compartment with a divider, dedicated fender, rope, and casting platform storage
Anchor locker with rope hold & fixed cleat and anchor lanyard
Electric windlass, dedicated tool storage, integrated through the stem anchor chute, 200’ of ½” 12 Plait Rope with 10’ of 1/4” chain with stainless steel swivel and plow style anchor
Split bow seating with cushions, cup holders & storage
Under gunnel storage boxes (4), line storage hooks
Bench style helm seat with arm rests and hand rails
Anti-fatigue mat at helm
Aft facing mezzanine seating with folding bolsters, arm rests, hand rails, insulated storage tub tub and tackle storage bin (2)
Stainless steel quick release fender pins (4)
Side utility door with integrated gate and oversized stainless steel hardware
Ladder for side access reboarding door with dedicated storage
Bilge access hatch with drainage
Stainless steel folding aft bench seats (2)
10” pop-up cleats cast 316 stainless steel & through bolted (6)
Stainless steel drink holders (12)
Oversized recessed cockpit drains with stainless steel covers
Bow casting platform with filler cushion transformable to bow table with pedestal with dedicated storage
Coaming bolsters around entire perimeter of deck
Flush style motor well with Integrated swim platforms (2) with handrails (2) and telescoping ladder (1)
Low profile aluminum powder-coated bow rails
Anti-fatigue helm pad – mocha or storm gray
Premier audio package – Fusion 770 control head
Interceptor style Zipwake trim tab system with automatic leveling & roll control
Dual bilge pumps
High-water alarm
LED anchor light
LED navigation lights
Compass
Electric horn
Battery charger
Batteries AGM (4), two engine start and two house batteries
Full color spectrum hardtop & deck courtesy lighting
Pull out fresh-water shower
Fresh and salt water wash down hoses stored in flush mounted retractable hose reels
Single level cockpit with unobstructed 360 degree gunnel access
Dual transom mounted circulating live wells with light, clear acrylic lid, stainless steel friction hinges & latch – 25 gal each
Forward 80 gallon insulated in deck fish box with macerator pump and overboard discharge
Dual 40 gallon insulated in deck fish boxes with macerator pump and overboard discharges
Stainless steel rod holders (12) bedded & through bolted
Stainless steel combination rod-cupholders (4) bedded & through bolted
Under gunwale rod racks (4) with toe rails (2)
Under gunwale power ports (2)
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 11/11/26 | Initial price | $739,000 |
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Florida, United States Similar to the 2026 Everglades 315 Center Console
Compare with similar boats and find the perfect one for you.
2026 Everglades 315 Center Console | ||||||
|---|---|---|---|---|---|---|
| Price | $739,000 | $730,962 | $749,999 | $619,631 | $349,999 | $333,448 |
| Location | Boca Raton | Fort Myers | Cortez | Fort Myers | Fort Lauderdale | Orange Park |
| Nominal Length | 32' | 33' | 39' | 31' | 32' | 27' |
| Draft | 4' | - | - | - | - | - |
| Engine Make | Mercury | - | Yamaha | - | Yamaha | Yamaha Outboard |
| Total Engine Power | 400 hp | - | 450 hp | - | 425 hp | 600 hp |
| Days on Market | 1 | 385 | 259 | 502 | 35 | 151 |
| Get in touch |
Meet the Broker

Address
Want to update the details or images for this boat? Claim this listing by getting in touch.
Boat Location
Contact Yacht Hampton Yacht Sales about 2026 Everglades 315 Center Console
999 East Camino Real, Boca Raton, FL, 33432





























