2006 Bristol Channel Cutter 28
$129,000
Boat in Indiantown, FL 34956 US
Built in 2006
28
1 Engine (Yanmar)
34.8 feet
Diesel
Fiberglass/Reinforced
STRAVAIGIN is a wonderful example of the Lyle Hess-designed and Sam Morse-built Bristol Channel Cutter 28, a classic pocket bluewater cruiser with a reputation far larger than her length overall. Built from a hull-and-deck package purchased by a Maine schooner captain, she was ultimately completed by Apache Marine under the direction of shipwright Bill Buchholt and launched in 2009.
She is reported to have been completed to Morse factory standards using components supplied by Cape George Marine after Cape George acquired the Sam Morse molds. STRAVAIGIN is described as the last hull done at the Morse factory in Costa Mesa, giving her an especially compelling place in the Bristol Channel Cutter story.
Her owners sailed her from Maine to Grenada, throughout the Caribbean, and back to Florida, using the boat only about three months per year. She is now on the hard in Indiantown, Florida and ready for her next adventure, with good canvas, recently completed varnish, recent engine service, Coppercoat bottom protection, and the distinctive Morse trim-tab self-steering system.
Key Features:
- Last Bristol Channel Cutter 28 reported to have been done at the Sam Morse factory in Costa Mesa
- Lyle Hess-designed, Sam Morse-built Bristol Channel Cutter with classic offshore pedigree
- Completed by Apache Marine under shipwright Bill Buchholt and launched in 2009
- Yanmar 29 HP diesel with approximately 1,125 hours; recently serviced
- Unique Morse trim-tab self-steering system
- Coppercoat bottom protection; light sanding required year after year
- Good canvas, recently completed varnish, and a well-maintained presentation
- Forespar mast and boom with cutter rig, high-cut Yankee, staysail, triple-reef mainsail, and unused asymmetric spinnaker
STRAVAIGIN offers a compact, practical cruising interior arranged for serious passagemaking and simple liveaboard comfort. The layout sleeps three with a pull-out double to port, a seven-foot standard saloon berth to starboard, and an aft quarter berth that can be used for crew or storage.
The main saloon is centered around opposing settees and a fold-down table that seats three. The galley is to port, refrigeration is to starboard, and the refrigerator top doubles as a navigation table. Forward is a separate cabin with the head, sink, vanity, mirror, storage, and access to the anchor locker. A privacy door separates the saloon from the forward head area.
Interior Styling and Additional Features:
- Pull-out double berth to port
- Seven-foot standard saloon berth to starboard
- Aft quarter berth for crew or additional storage
- Separate forward head compartment with sink, vanity, mirror, and storage
- Privacy door separating saloon from forward head area
- Functional port-side galley
- Starboard refrigeration with top surface doubling as the navigation table
MAIN SALOON
The main saloon is designed around efficient use of space, ventilation, and practical sea berths. A large opening hatch, multiple bronze opening ports, and a butterfly hatch provide light and airflow, while the fold-down table creates a functional dining and working area.
- Sleeps three in three different berths
- Large opening hatch for air, light, and ventilation
- Six opening bronze ports in the saloon
- Butterfly hatch over the main saloon
- Fold-down table that seats three
- Storage outboard in the saloon
- Refrigerator top doubles as navigation table
MASTER STATEROOM
STRAVAIGIN does not have a separate master stateroom in the conventional sense. Her accommodations are arranged as a traditional Bristol Channel Cutter interior with saloon berths, a quarter berth, and a forward head compartment.
- Pull-out double berth to port
- Seven-foot standard saloon berth to starboard
- Aft quarter berth for crew or storage
Master Head
The forward cabin contains the head area with a holding tank, sink, vanity, mirror, storage, and access to the anchor locker. A privacy door separates this space from the saloon.
- Head with holding tank
- Sink, vanity, and mirror
- Storage area forward
- Access to the anchor locker
- Privacy door between saloon and forward head area
The galley is located to port and is fitted for extended cruising, with diesel cooking, refrigeration/freezer capacity, hot and cold pressure water, Corian countertops, and useful locker and drawer storage.
- Diesel stove and oven
- Refrigeration and freezer
- Double stainless steel sink with hot and cold water
- Corian countertops
- Hot water heater
- Lockers and drawers
- Pull-out garbage holder
- Dishes and flatware included
NAVIGATION STATION
The navigation area is compact and integrated into the saloon layout, with the refrigerator top doubling as the navigation table.
- Refrigerator top doubles as navigation table
- Compact saloon-integrated navigation area
ELECTRONIC SYSTEMS
STRAVAIGIN is equipped with the essential navigation and sailing electronics expected aboard a compact offshore cruiser.
- VHF radio
- Compass
- Autopilot
- Depth sounder
- GPS
- Wind speed and direction
- Log-speedometer
HULL
STRAVAIGIN is a fiberglass Bristol Channel Cutter 28 designed by Lyle Hess and built by Sam Morse. She is described as a hull-and-deck boat completed by Apache Marine to Morse factory levels and launched in 2009.
- Fiberglass hull
- Lyle Hess design
- Sam Morse-built Bristol Channel Cutter
- Completed by Apache Marine under shipwright Bill Buchholt
- Coppercoat bottom protection
DECK
The deck layout is traditional and robust, with fiberglass decks, molded non-skid, bulwarks, bronze hardware, a bowsprit, dorade ventilation, and recent brightwork/varnish reported in excellent condition.
- Fiberglass decks with non-skid pattern
- Lewmar 12V electric windlass
- ABI classic bronze windlass
- 35 lb CQR and 35 lb anchor in stainless steel cradle on the bowsprit
- Collapsible Fortress anchor in lazarette
- 250 ft of 5/16 in chain
- Six opening bronze ports in the saloon; two fixed ports in the forward cabin
- Opening forward hatch and butterfly hatch over the main saloon
- Bronze stanchions with lifelines
- Two dorade vents
- Bulwarks and brightwork recently done and reported in excellent condition
- Bronze boom gallows
COCKPIT
- Comfortable cockpit with seating for four
- Tiller steering with black locust tiller
- Good canvas dodger and hatch covers
- Cockpit cushions
- Cockpit table
- Wind steering vane
- Two solar panels
- Two self-tailing sheet winches
- Mainsheet winch
- Bronze boom gallows
MAST AND RIGGING
- Forespar mast and boom
- Cutter rig
- Both headsails on Schaefer furlers led back to the cockpit
- Spinnaker pole attached to mast and fully rigged
SAILS AND WINCHES
- High-cut Yankee
- Staysail
- Triple-reefing mainsail
- Asymmetric spinnaker - reported never used
- Genoa cover and staysail cover
- Mainsail cover
- Dodger
- Hatch covers
- Two self-tailing sheet winches
- Mainsheet winch
ENGINE AND MECHANICAL
STRAVAIGIN is powered by a 29 HP Yanmar three-cylinder diesel with approximately 1,125 hours. The engine is reported to have been recently removed, totally serviced, and reinstalled. The drivetrain includes direct drive and a three-blade bronze Max Prop.
- Yanmar three-cylinder diesel engine - 29 HP, approximately 1,125 hours
- Engine recently removed, totally serviced, and reinstalled
- Direct drive
- Three-blade bronze Max Prop
- Double Racor fuel filters
- Balmar high-output alternator with external regulator
- Simpson-Lawrence manual anchor windlass
- Lewmar 12V electric windlass
PLUMBING AND TANKAGE
Tankage includes 28 gallons of fuel and 68 gallons of fresh water. The forward head is fitted with a holding tank, though capacity is not provided in the source listing.
- Fuel capacity: 28 gallons
- Fresh water capacity: 68 gallons
- Forward head with holding tank
- Hot and cold water at galley sink
- Hot water heater
ELECTRICAL SYSTEM
- 12V electrical system
- Complete electrical panel
- Balmar alternator with external regulator
- Domestic and engine start batteries
- Two solar panels
- 12V fans
- 12V lighting
- Shore power cord
AUDIO/VISUAL AND ENTERTAINMENT EQUIPMENT
- Main saloon stereo with cockpit speakers
SAFETY EQUIPMENT
- 4-person Zodiac life raft - service needed
- Flares and lifejackets
- LED navigation lights
BROKER’S COMMENTS
STRAVAIGIN is a highly appealing example of the Bristol Channel Cutter 28, combining the pedigree of a Lyle Hess design, the desirability of Sam Morse construction, and a practical cruising specification. Her history as the last hull done at the Morse factory, paired with her Apache Marine completion and thoughtful maintenance, makes her a distinctive pocket cruiser with real character.
- Classic Lyle Hess/Sam Morse Bristol Channel Cutter pedigree
- Last hull reported done at the Sam Morse factory in Costa Mesa
- Ready for her next adventure from Indiantown, Florida
- Well-maintained pocket cruiser with recent varnish, good canvas, and recent engine service
Price History
| Date | Event | Price |
|---|---|---|
| 5/12/26 | Initial price | $129,000 |
2006 Bristol Channel Cutter 28 Video Tours
Overview from around the web 2006 Bristol Channel Cutter 28
The 2006 Bristol Channel Cutter 28 has received positive feedback from sailors and boat enthusiasts, highlighting its classic design and excellent performance
Customers appreciate the sturdy build quality and seaworthiness of this vessel, making it a reliable choice for coastal cruising and offshore adventures. Many users have noted the comfortable interior layout, which maximizes space while providing essential amenities for extended voyages. Sailors often commend the Cutter's responsive handling and strong pointing ability, attributing its performance to the traditional long keel and transom-hung rudder design. The vessel's aesthetic appeal, with its charming lines and classic teak finishes, has also been a point of admiration among owners. Additionally, owners have expressed satisfaction with the well-thought-out storage options and the ease of sailing, making it accessible for both experienced sailors and newcomers alike. Overall, the Bristol Channel Cutter 28 is celebrated for its combination of beauty, functionality, and reliability, reflecting the high standards set by the Bristol brand.
The Biggest Pros and Cons
Bristol Channel Cutter 28 (2006) Pros and Cons
Pros
Solid Construction: The Bristol Channel Cutter 28 is known for its rugged build quality. Its fiberglass hull is designed to withstand challenging sea conditions, making it suitable for coastal cruising and bluewater sailing.
Classic Design: With its traditional lines and aesthetically pleasing profile, the Bristol Channel Cutter 28 appeals to classic boat lovers. Its design is not only attractive but functional, providing good performance under sail.
Stability and Performance: The boat features a fin keel and skeg-hung rudder, which contribute to its excellent tracking and stability. It offers a comfortable and secure sailing experience in various wind conditions.
Spacious Interior: Despite its compact size, the interior layout is cleverly designed to maximize space, featuring a cozy salon, galley, and sleeping accommodations for a small crew. This makes it suitable for weekend adventures and longer passages.
Maneuverability: The compact size of the Bristol Channel Cutter 28 makes it easy to handle, even for less experienced sailors. It’s nimble enough for tight marina spaces and responsive enough for maneuvering in various conditions.
Community and Resources: Owning a Bristol Channel Cutter can connect you to a community of enthusiasts and provide access to resources for maintenance and modifications.
Cons
Limited Space: While the interior is well-designed, the 28-foot length does limit living space. This may not be ideal for larger crews or those seeking extensive comfort during long voyages.
Maintenance Requirements: Like many classic sailing vessels, the Bristol Channel Cutter 28 may require ongoing maintenance to keep it in top shape. Parts can sometimes be more challenging to source, depending on the specific needs of the boat.
Older Technology: As a model from 2006, some features might be less advanced compared to newer boats with updated technology and modern amenities, which could be a consideration for those seeking the latest innovations.
Performance in Light Winds: While the boat performs well in various conditions, some sailors find that it can be less effective in light winds compared to more modern designs geared towards performance.
Resale Value: Depending on market trends, the resale value may not always be as robust as newer boats, which could affect future buyers looking to upgrade.
Made For
The 2006 Bristol Channel Cutter 28 is an ideal vessel for adventurers, cruising enthusiasts, and those who appreciate classic design with modern functionality. This boat is perfect for sailors who desire a reliable and seaworthy craft for coastal cruising or extended offshore passages. Its sturdy build and robust construction appeal to those who value safety and durability in various marine conditions. The spacious interiors cater to couples or small families looking for a comfortable weekend getaway on the water, while the well-appointed galley and cozy sleeping quarters ensure a pleasant onboard experience. Moreover, the Bristol Channel Cutter 28 is perfect for enthusiasts of traditional sailing craftsmanship, as its design reflects a strong maritime heritage combined with contemporary enhancements. Whether you're a seasoned sailor or a newcomer to the sailing world, this boat offers a blend of charm, performance, and livability that will captivate anyone with a passion for the sea.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Florida, United States Similar to the 2006 Bristol Channel Cutter 28
Compare with similar boats and find the perfect one for you.
 2006 Bristol Channel Cutter 28 | |||||
|---|---|---|---|---|---|
| $129,000 | $139,000 | $169,900 | $85,000 | $75,000 | $69,999 |
| Indiantown | Fort Pierce | Jacksonville | Indiantown | Indiantown | Saint Augustine |
| - | 28' | 40' | 37' | 28' | 41' |
| 11' | - | - | - | - | - |
| 5' | - | - | - | - | - |
| Yanmar | Yanmar | Yanmar | Yanmar | Yanmar | Westerbeke |
| 29 hp | 30 hp | 50 hp | 44 hp | 30 hp | 52 hp |
| 5 | 375 | 64 | 54 | 425 | 199 |
Other Bristol Channel Cutter 28 boats for sale in Florida, United States
Other Bristol Channel Cutter boats for sale in Florida, United States
Meet the Broker
Address
Other Information about David Walters Yachts
Whether buying your first yacht or selling to make way for the next adventure, David Walters Yachts will ensure fair winds throughout your yacht purchase or sales process. Our distinctive combination of on-the-water experience, innovative solutions, and dedication to our customers has made David Walters Yachts among the industry's most highly regarded and trusted yacht brokerages for over 40 years.
Boat Location
Contact David Walters Yachts about 2006 Bristol Channel Cutter 28
850 NE 3rd Street, Suite 209, Dania Beach, FL, 33004
Login with Google