2019 Beavertail Vengeance 18' Boat in Dunedin, FL 34698 US
Built in 2019
Vengeance 18'
1 Engine (Evinrude)
18 feet
Gas
Fiberglass/Reinforced
2019 Beavertail Vengeance 18
Offered at $47,000 and located in Dunedin, Florida, this original-owner 2019 Beavertail Vengeance is an exceptionally well-equipped technical skiff that has been garage kept and thoughtfully updated throughout its ownership.
She is powered by an Evinrude E-TEC 115 H.O. with only 336 hours and rides on a custom-fitted Ram-Lin aluminum trailer. The original Beavertail factory build invoice, recent engine service records, and April 2026 computer diagnostic report are all on file.
The Vengeance combines shallow-water capability with a surprisingly comfortable and practical center-console layout. This boat features extensive rod storage, a large aerated livewell, premium upholstery, dual electronics capability, hydraulic jack plate, trim tabs, an eight-foot Power-Pole Blade, and a recently added 24-volt Power-Pole MOVE trolling motor powered by a dedicated lithium battery.
Ownership and Condition
This is a one-owner, garage-kept skiff that has been used and maintained by an experienced owner. The hull, nonskid, upholstery, powder coating, storage compartments, and trailer all present very well for a 2019 model.
The Medium Gray hull, Whisper Gray nonskid, black powder coating, and custom diamond-pattern upholstery create a sharp and timeless color combination.
The boat does show several minor cosmetic blemishes consistent with normal use, including light deck scratches, several small gelcoat nicks, minor rubrail scuffing, and light wear around a few hardware locations. These items are photographed and do not detract from the boat's excellent overall presentation.
Engine and Recent Service
Powered by a 2019 Evinrude E-TEC 115 H.O. with verified 336 hours.
An Evinrude diagnostic report completed in April 2026 documented 334 hours and 51 minutes of engine operating time and showed no active engine faults.
North Causeway Marine completed an extensive service in April 2026 that included:
- New water pump
- New spark plugs
- Engine fuel-filter replacement
- Fuel/water separator replacement
- Thermostat replacement
- Thermostat gaskets and O-rings
- Gearcase lubricant service
- Gearcase seals
- Stern-bracket anode
- Gearcase anode
- Replacement of the leaking engine flush-port grommet
- Computer diagnostic inspection
The broker verified that BRP extended engine warranty coverage remains in effect through April 29, 2029 and is fully transferrable.
Electronics and Helm
- Nine-inch Garmin multifunction display
- NMEA 2000 engine integration
- Included 12-inch Simrad NSS evo3S
- Removable Balzout electronics mount
- Simrad stored separately and currently in the broker's possession
- Simrad previously used for redundancy and Florida Marine Tracks navigation
- Evinrude multifunction engine gauge
- Livorsi billet throttle and shift controls
- Engine trim and hydraulic jack-plate controls integrated at the throttle
- Lenco electric trim tabs with LED position indicators
- Uflex hydraulic steering
- Tilt steering helm
- Rope-wrapped three-spoke steering wheel
- Power-Pole helm control
- Dual USB and 12-volt power outlets
- Labeled accessory switch panel
Shallow-Water Equipment
- 24-volt Power-Pole MOVE trolling motor
- Titanium trolling-motor shaft
- Quick-release mounting bracket
- Dedicated lithium trolling-motor battery
- Charging-base remote
- Second MOVE remote included
- Eight-foot black Power-Pole Blade
- Atlas Micro hydraulic jack plate
- Lenco trim tabs
- Recessed push-pole holders at the bow and amidships
- Black powder-coated poling platform
- SeaDek poling-platform pad
- Multiple integrated platform rod holders
- Platform cupholder
Fishing and Deck Layout
- Center-console configuration
- Forward console jump seat
- Removable aft helm backrest
- Fixed full-width aft seating cushion
- Custom Nuance Gray upholstery
- Black trim and black side panels
- Diamond-pattern upholstery
- Four forward-facing rod tubes per side
- Starboard console-mounted three-place rod holder
- Multiple rod holders integrated into the poling platform
- Under-gunwale rod storage
- Full under-gunwale SeaDek pads
- SeaDek measuring ruler on forward deck
- Five stainless-steel flush-mounted cupholders
- Two stainless-steel console handrails
- Finished and drained storage compartments
- Gas-strut-supported hatches
- 18-gallon fuel tank
Livewell and Audio
- Large center livewell
- Clear Beavertail-logo livewell lid
- Raw-water circulation system
- Power Bubbles auxiliary aeration
- Adjustable timer system
- Livewell lighting
- JL Audio Bluetooth audio system
- Two JL Audio speakers
- Amplifier
- Red cockpit lighting beneath the gunwales
- Red LED lighting beneath the poling platform
- Pair of green SeaBlaze underwater lights
Trailer
Included is the original custom-fitted 2019 Ram-Lin aluminum dry-launch trailer featuring:
- Swing-away tongue
- Single 2,500-pound axle
- 2,500-pound GVWR
- Custom bunk arrangement
- Alloy-wheel upgrade
- Matching spare wheel and tire
- Spare hub and mount
- Breakaway system
- Tires reportedly replaced approximately two years ago
- Wheel hubs reportedly replaced in 2026
Boat on Trailer Measurements:
LOA: 21'4"
W: 89"
H: 79"
This Vengeance is available for inspection in Dunedin, Florida, by appointment.
Factory build invoice, service documentation, engine diagnostic report, detailed photographs, and walkthrough videos are available to qualified buyers.
Tags: Hell's Bay Boatworks, Maverick, Maverick HPX, Beavertail Skiffs, Hell's Bay Marquesa, East Cape Skiffs, Hell's Bay Waterman, Hell's Bay Professional, Hell's Bay Marquesa, East Cape Vantage, East Cape Evo, 17HPX V, 18HPX V, Dolphin Super Skiff, Chittum Skiffs, Hewes Redfisher 18, Maverick Master Angler 18, Action Craft.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 7/31/26 | Initial price | $47,000 |
Videos from Florida Native Boat Sales on this 2019 Beavertail Vengeance 18'
Overview from around the web 2019 Beavertail Vengeance 18'
Customers are praising the 2019 Beavertail Vengeance 18' for its exceptional performance and versatility on the water
Many have highlighted its impressive stability and maneuverability, making it ideal for shallow-water fishing and navigating through tight spots. The spacious deck layout offers ample room for casting and moving around, appealing to both casual anglers and serious fishing enthusiasts. Users also appreciate the high-quality construction and durable materials, which contribute to the boat's longevity and reliability. The powerful engine options provide a smooth ride, ensuring that customers can reach their favorite fishing spots quickly and efficiently. Additionally, the customizable features, such as storage options and equipment mounts, have received positive feedback, allowing owners to tailor the boat to their specific needs. Overall, the 2019 Beavertail Vengeance 18' is regarded as a great investment for anyone looking for a dependable, performance-driven skiff that excels in various aquatic environments.
Made For
The 2019 Beavertail Vengeance 18' is designed for the avid outdoorsman and water sports enthusiast seeking versatility and performance. Whether you're a seasoned angler looking to navigate shallow waters with ease or a recreational boater wanting to enjoy leisurely days on the water, this boat offers the perfect blend of stability, agility, and comfort. Equipped with a spacious layout, the Vengeance 18' accommodates fishing gear, coolers, and all the essentials for a day on the water. Ideal for both freshwater and saltwater adventures, the boat is particularly suited for those who appreciate the thrill of exploring wetlands, marshes, and other hard-to-reach spots. Family-oriented boaters will also find the Vengeance appealing, thanks to its safety features and ample seating. With a focus on durability and performance, this boat is perfect for anyone who values quality craftsmanship and a reliable vessel for their aquatic pursuits. Whether you're chasing the big catch or simply enjoying time with loved ones, the 2019 Beavertail Vengeance 18' caters to a variety of boating lifestyles.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Florida, United States Similar to the 2019 Beavertail Vengeance 18'
Compare with similar boats and find the perfect one for you.
 2019 Beavertail Vengeance 18' | ||||||
|---|---|---|---|---|---|---|
| Price | $47,000 | $49,900 | $64,000 | $28,000 | $27,995 | $67,000 |
| Location | Dunedin | Apollo Beach | Lithia | Longboat Key | Summerfield | Fort Lauderdale |
| Nominal Length | 18' | 20' | 20' | 16' | 19' | 23' |
| Engine Make | Evinrude | Evinrude | Mercury | Suzuki | Evinrude | Mercury |
| Total Engine Power | 115 hp | 150 hp | 250 hp | - | 115 hp | 350 hp |
| Days on Market | 26 | 147 | 356 | 173 | 533 | 13 |
| Get in touch |
Other Beavertail boats for sale in Florida, United States
Meet the Broker
Address
Boat Location
Contact Florida Native Boat Sales about 2019 Beavertail Vengeance 18'
Dunedin, FL, 32759
Login with Google