1–3/3

2026 Hans Christian 41T Boat in Windom, TX 75492 US

$128,500

Used
builtBuilt in 2026
Year the boat was built
model

41T

Boat model
engine

1 Engine (Volvo Penta)

Engine type and count
length

41 feet

Overall boat length
fuel

Diesel

Fuel type
material

Fiberglass/Reinforced

Hull material

Hans Christian 41 Traditional - Hull #56


The Final Hans Christian 41 Traditional Hull & Deck - A Rare Opportunity to Complete a Bluewater Classic

Hull #56 represents the final hull and deck of the renowned Hans Christian 41 Traditional series, offering a rare opportunity to complete a new, factory-built offshore yacht to the owner's specifications.

Constructed by Pantawee Marine Co., Ltd., the longtime Hans Christian builder in Thailand, the hull and deck were substantially completed at the factory using the materials, construction methods, and craftsmanship associated with the Hans Christian name. The vessel, together with numerous original components, was subsequently shipped to Texas for completion.

The project stalled, and the yacht has remained in indoor storage for several years. The hull and accompanying components are new and unused, providing an alternative to purchasing and refitting an older cruising yacht.


Proven Bluewater Design


The Hans Christian 41 Traditional was designed for offshore passagemaking, emphasizing strength, stability, seaworthiness, and comfort at sea.

At approximately 40'10" LOA, 13'3" beam, and 35,500 pounds displacement, the HC41T features a traditional full keel with approximately 12,000 pounds of encapsulated lead ballast, a protected skeg-hung rudder, and a cutter rig designed for versatile sail handling in offshore conditions.

The hull incorporates solid fiberglass laminate below the waterline, while the fiberglass deck is balsa-cored with plywood reinforcement in high-load areas. The substantial hull-to-deck joint is bonded and mechanically fastened, with a high bulwark providing additional structural connection.

The rudder is supported by a heavy cast-bronze heel fitting, providing protection and structural support for the steering system.

The traditional cutter configuration, including installed chainplates and structural provisions for an inner forestay and staysail, permits a flexible sail plan suited to varying offshore conditions.


Factory-Built Construction


Unlike a home-built project, Hull #56 was constructed by the original Hans Christian builder, with major structural components and specialized fittings manufactured or installed at the factory.

Completed work includes the hull, deck, structural bulkheads, mast step, compression post, engine beds, chain locker, cockpit structures, rudder system, chainplates, and various deck fittings.

The project also includes an extensive inventory of original Hans Christian bronze and stainless-steel hardware, steering and drivetrain components, electrical equipment, plumbing materials, and interior woodwork.

The doors and some custom cherry interior furniture was professionally fabricated by Custom Marine of St. Petersburg, Florida, and remains crated in storage.


New Volvo Penta Diesel


A new, zero-hour Volvo Penta D2-75 diesel engine is installed on the engine beds but has never been started or commissioned.

The engine is paired with a Hurth Marine MS25A-A transmission. Additional drivetrain components, including an Aquadrive thrust bearing, shaft components, stern bearing housing, and associated hardware, are included. Final drivetrain installation remains incomplete.


Extensive Component Inventory


A substantial inventory of original and specialty components accompanies the project, including:

  • Bronze anchor rollers, hawse fittings, portlights, and freeing ports
  • Bronze genoa and staysail cars
  • Bronze cowl and dorade components
  • Bronze rudder heel and steering hardware
  • Boom gallows hardware
  • Custom stainless-steel chainplates
  • Stainless bowsprit and pushpit components
  • Mast base plate and bobstay assembly
  • Rudder shaft and associated hardware
  • Custom cherry interior doors, cabinetry, and staving
  • Blue Sea Systems AC/DC distribution panels
  • Aquadrive thrust bearing
  • Cutlass bearing and housing
  • Bronze shaft packing gland and Hans Christian stern bearing housing
  • Galley pumps and plumbing components
  • Marine plywood, fiberglass, insulation, and other construction materials

This inventory preserves many specialized Hans Christian components and substantially reduces the sourcing required to complete the vessel.


Completion & Customization

Hull #56 is an unfinished new-build project, not a commissioned or turnkey yacht.

Remaining work includes the mast, standing and running rigging, sails, winches, final drivetrain installation, electrical and navigation systems, plumbing, galley and head equipment, interior systems, safety equipment, and various deck fittings and finishing details.

The unfinished condition allows the purchaser to select modern systems and equipment suited to a particular cruising program, including batteries, solar power, electronics, communications, refrigeration, watermaker, heating, ground tackle, and interior appointments.


Specifications


Builder

Pantawee Marine Co., Ltd. / Hans Christian Yachts


Model

Hans Christian 41 Traditional


Hull

#56 - Final hull of the series


Type

Offshore bluewater passagemaker


LOA

40'10"


LWL

36'10"


Beam

13'3"


Draft

6'2"


Displacement

Approx. 35,500 lbs


Ballast

Approx. 12,000 lbs lead


Hull Construction

Solid fiberglass below waterline


Deck

Balsa-cored fiberglass with reinforced high-load areas


Keel

Modified Full keel with encapsulated lead ballast


Rudder

Skeg-hung


Rig

Cutter


Engine

Volvo Penta D2-75 diesel


Engine Hours

Zero


Fuel & Water

Integral tanks


Condition

New / partially constructed


Location

Texas


Asking Price

$128,500


The Opportunity


Hans Christian 41 Traditional Hull #56 offers a rare opportunity to complete the final example of a respected offshore cruising design.

The original builder has completed the hull, deck, structural foundation, keel, rudder system, and numerous specialized components. The accompanying inventory provides a substantial foundation for completing the yacht while preserving its Hans Christian heritage.

For an experienced sailor seeking a traditional bluewater passagemaker tailored to modern cruising requirements, Hull #56 presents an unusual combination of proven design, factory construction, and customization potential.

Serious inquiries are invited to review the extensive component inventory and construction documentation and arrange an inspection.

Nominal Length
41ft
Length Overall
51ft
Length at Waterline
36.83ft
Length on Deck
40.92ft
Beam
14.33ft
Max Draft
6.42ft
Ballast
12300lb
Heads
1
Fresh Water Tanks
150gal
Fuel Tanks
100gal
Holding Tanks
25gal
Hull Material
fiberglass
Hull Shape
displacement
Engine 1
Engine Make
Volvo Penta
Engine Model
D2-75
Engine Type
inboard
Fuel Type
diesel
Construction

The hull and deck are hand laid up in accordance with approved laminates and procedures. The standard hull and deck color is off white (ref. LR #8981). In the hull, a combination of woven roving and chopped strand mat are used with thickness increasing towards the keel. There is a reinforcing balsa core in the topsides which stops at six inches above the waterline. Vinylester resin is used for the initial layers below the waterline. The ballast keel is encapsulated entirely within the hull molding. The deck molding has a PVC foam and/or balsa core which is replaced with plywood in high stress areas where fittings are attached. A two part epoxy barrier coat paint is applied below the boot-top for extra anti-osmosis protection.

Rudder

The rudder is molded GRP with a stainless steel stock, the base of which locates onto the bottom rudder skeg. The heel fitting is a cast bronze item. The rudder post is machined to accept cable steering fittings as standard.

Recommended Rig

The standard rig for the vessel is a cutter rig with a club footed staysail to the dimensions as follows:

I 52' 0" (15.85m)
J 22'6" (6.855m)
P 48'3 ½"(14.72m)
E 15'7" (4.75m)

A single spreader aluminum mast with external halyards for Mainsail, Headsail and Staysail. Three winches and cleats mast mounted for halyards. One masthead light, one bow light and one pair of spreader lights. The aluminum boom fitted with a 4:1outhaul system and two winches and cleats for outhaul and reefing. Standing rigging of 1 x 19stainless steel wire with swage on upper end fitting sand swage on turnbuckles at lower fittings

Recommended Sails

MAINSAIL 8.0oz Cruising cross cut main with three reefs and a total area of 35.23m2

HEADSAIL 8.0oz Cruising cross cut,80% hanks on Yankee-total area of 45.93m2

STAYSAIL 8.0oz Cruising cross cut hanks on Staysail-total area of 19.36m2

BOOM COVER

YANKEE

READY BAG

STAYSAIL

READY BAG

Also Supplied

Stainless Steel Pulpit
Stainless Steel Boomkin
Bronze Port Holes
6 custom bronze mooring cleat/fairlead combination
2 large bronze freeing ports
Bronze labeled water and fuel deck fillers
2 custom bronze hawse pipes
Custom bronze double anchor rollers

Recommended Winches and Hardware

Primaries 2 x #502 speed Bronze Self Tailing Winches
Staysail 1 x #162 speed Bronze Self Tailing Winch
Mainsheet1 x #442 speed Bronze Self Tailing Winch
Halyards 3 x #302 speed Bronze Self Tailing Winches
Outhaul1 x #162 speed Bronze Self Tailing Winch
Reefing1 x #162 speed Bronze Self Tailing Winch

List of Components

Item Cast & Machined Bronze Components

1 ANCHOR ROLLERS

(2) 2 WHISKER STAY FITTING

3 BOWSPRIT STAR

4 COMPRESSION POST TOP FITTING

5 COMPRESSION POST BASE LOWER FITTING

6 COMPRESSION POST - BRASS TUBE MACHINED ONE END (with s/s fabricated compression adjuster)

7 SCUPPER DRAINS (ANGLED TYPE FOR C/PIT SEATS) (4)

8 GENOA CARS (Genoa x 4 / Staysail x 2) (6)

9 TABLE BASE PLATE

10 HAWSE PIPE FAIRLEADS WITH HORNS - (STRAIGHT) (6)

11 HAWSE PIPE FAIRLEADS BACKING RINGS (6)

12 BOOM GALLOWS BASE (2)

13 BOOM GALLOWS ARMS (2)

14 PORTLIGHT - OVAL - WITH SAFETY GLASS, SCREEN AND OUTER TRIM RING

15 PORTLIGHT - ROUND - WITH SAFETY GLASS, SCREEN, OUTER TRIM RING and DRAIN HOLE

16 MAINSHEET TRACK ARCH

17 MAINSHEET TRACK ARCH UPSTANDS (2)

18 FREEING PORTS (LARGE ) (2)

19 SKYLIGHT HINGES (LARGE) (3)

20 RUDDER HEEL FITTING

21 RUDDER GUDGEON (PAIR)

22 SAMPSON POST CAPS (Largest size)

23 ANCHOR CHAIN WELLS (2)

24 COWL VENTS (2)

25 DORADE BOX ACCESS PORTS (2) + (4)

26 CUSTOM FORWARD BRONZE HATCHES

(2) Item Cast & Machined Aluminum Components

1 STEERING RADIAL DRIVE ASSEMBLY (machined to fit rudder stock)

2 TABLE SUPPORT (for underneath plywood / wood table top - painted white)

Item Cast & Machined Stainless Steel Components

1 Cranz Iron

2 Gammon Band

3 Stanchion Bases (each one different angles to suit different angles of bulwarks)

4 Mast Base Plate

5 Bob Stay Assembly

6 Full Bow Sprit with base and guardrails

7 Full Push Sprit with base and guardrails

8 Stern Fitting

9 Rudder Shaft

10 Chain Plates (6)

Item Custom Wood Components Manufactured and in Storage

1 Forward workshop louvered door with split frame

2 Forward berth louvered door with split frame

3 Quarter berth hinged louvered door with split frame

4 Head louvered door with split frame

5 Under Pullman storage dresser with drawers and doors

6 Custom Staving (2" x 7/32") for all vertical surfaces (361 Sq Ft)

Item Aftermarket Components in Storage

P-00001 Fynspray Galley Pump (Fresh)

P-00002 Fynspray Galley Pump (Salt)

P-00003 Fynspray Service Kit

P-00004 Kitchen Bridge Faucet (Brass)

P-00005 Bathroom Bridge Faucet (Brass)

P-00006 Isotemp Water Heater

P-00007 Bronze Hose Deck Fill - Water

P-00008 Bronze Hose Deck Fill - Waste

P-00009 Bronze Hose Deck Fill - Diesel

P-00010A Deck Fill Replacement Cap

P-00010B Deck Fill Replacement Key

P-00010C Deck Fill Replacement O Ring

P-00011 Dynaplate Super Grounding Plate

P-00019 Splendide Washer & Dryer

P-000XX Groco PST-2 Storage Tank

P-000XX Bronze Hereshoff Cleats (4)

P-000XX Two Aluminum Trident Propane Tanks

Item Custom Components Manufactured and in Storage

A Aquadrive thurst bearing with machined adapter plates for angled transmission

B Blue Sea AC/DC Electrical Distribution Panel

C Fiberglass Bowsprit

D Cutlass Bearing and Housing

Item Miscellaneous

A Custom Steel Cradle for Boat

B Custom Steel Stairs with 11.5' Platform

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Price History

DateEventPrice
10/14/26Initial price$128,500

Contact Grandpappy Point Marina

132 Grandpappy Drive, Denison, TX, 75020

Overview from around the web 2026 Hans Christian 41T

The 2026 Hans Christian 41T has received a wealth of positive feedback from customers, emphasizing its exceptional craftsmanship and seaworthiness

Many owners appreciate the classic design and robust build quality, which provides a sense of security while sailing in various conditions. The spacious interior layout is frequently praised for its comfort and functionality, making it an ideal choice for extended cruising. Sailors highlight the performance of the vessel, noting its excellent handling and stability even in challenging weather. The well-designed rigging and sail plan contribute to an enjoyable sailing experience. In addition, many users appreciate the attention to detail in the woodwork and fixtures, creating a warm, inviting atmosphere below deck. Overall, the Hans Christian 41T is celebrated for its combination of traditional aesthetics and modern sailing capabilities, making it a beloved choice among cruising enthusiasts. Customers frequently recommend it for those seeking durability, elegance, and a true sense of adventure on the water.

The Biggest Pros and Cons

Pros

Exceptional Craftsmanship: The Hans Christian 41T is renowned for its high-quality craftsmanship and attention to detail, ensuring durability and longevity.

Classic Design: This vessel boasts a timeless, traditional design that appeals to both seasoned sailors and newcomers alike, providing an elegant aesthetic on the water.

Stability and Performance: The hull design offers excellent stability and sailing performance, making it suitable for both coastal cruising and offshore adventures.

Spacious Interior: The layout of the 41T maximizes space, offering a comfortable and inviting interior with ample storage and living areas for extended voyages.

Strong Reputation: Hans Christian boats have a strong reputation among sailors for their reliability and seaworthiness, often becoming a home at sea for many.

Versatile Dick-O-Bald Rigging: The 41T features a well-thought-out rigging setup that simplifies handling, making it accessible for sailors of all skill levels.

Cons

Price Range: As a premium vessel, the 2026 Hans Christian 41T can be on the higher end of the price spectrum, potentially limiting access for budget-conscious buyers.

Weight: The robust construction can lead to a heavier displacement, which may affect speed and performance compared to lighter vessels.

Maintenance: Like many well-crafted, classic boats, the 41T may require more maintenance than modern fiberglass counterparts, particularly regarding wood finishes and systems.

Limited Speed: While the boat is stable and reliable, it may not reach the same high speeds as lighter, performance-oriented sailboats, which might be a consideration for those prioritizing speed.

Handling for New Sailors: The traditional design, while beautiful, may present a learning curve for new sailors who are accustomed to more modern, user-friendly systems.

Made For

The 2026 Hans Christian 41T is designed for seasoned sailors and adventurers seeking a reliable, long-range cruising vessel that embodies both luxury and performance. Ideal for those looking to explore distant shores, this classic yacht offers a perfect blend of comfort and seaworthiness, making it suitable for both experienced cruisers and those stepping into the world of bluewater sailing. With its spacious interior and functional layout, the Hans Christian 41T caters to families, couples, or solo sailors who value an inviting living space while at sea. The exemplary craftsmanship and attention to detail provide a sense of security and elegance, allowing you to embrace long passages with confidence. Whether you are planning a weekend getaway or a circumnavigation, the 2026 Hans Christian 41T is crafted for those who cherish the beauty of sailing and the exploration of new horizons.

Finance your dream boat!

Use our boat payment calculator to estimate monthly payments for 2026 Hans Christian 41T. Enter your down payment, choose a loan term, and adjust the interest rate to see an instant payment estimate — ideal if you're calculating boat payments before you enquire. Wondering how much does a Sail Cruiser cost in today's market, or how much does a Hans Christian cost for similar models? This boat financing calculator helps you compare scenarios in seconds, whether you're considering used boat financing or a new purchase.
$
$
510152025
%
Principal Loan Amount$109,225
Total Payment$195,290.24
Monthly payment
$813.71/mo

Finance your dream boat!

Use our boat payment calculator to estimate monthly payments for 2026 Hans Christian 41T. Enter your down payment, choose a loan term, and adjust the interest rate to see an instant payment estimate — ideal if you're calculating boat payments before you enquire. Wondering how much does a Sail Cruiser cost in today's market, or how much does a Hans Christian cost for similar models? This boat financing calculator helps you compare scenarios in seconds, whether you're considering used boat financing or a new purchase.
$
$
510152025
%
Principal Loan Amount$109,225
Total Payment$195,290.24
Monthly payment
$813.71/mo

Be the first to know when similar boats hit the market

Get notified when new boats become available

Boats For Sale in Texas, United States Similar to the 2026 Hans Christian 41T

Compare with similar boats and find the perfect one for you.

This Boat
Similar Boats
 
The Image of Hans Christian 41T 2026 - 02026 Hans Christian 41T
Recently Added
The Image of Hunter 326 2003 - 92333112003 Hunter 326
Price$128,500$107,500$98,000$89,900$74,000$47,000
LocationWindomGordonvilleAustinPottsboroGordonvilleKemah
Nominal Length41'38'37'36'36'32'
Beam14'-----
Draft6'-----
Engine MakeVolvo PentaYanmarYanmar--Yanmar
Total Engine Power--40 hp29 hp-18 hp
Days on Market421531392404682
Get in touch

Meet the Broker

Address

132 Grandpappy Drive
Denison, TX 75020

Want to update the details or images for this boat? Claim this listing by getting in touch.

Boat Location

Be the First to Know

Get notified when new boats become available.

Contact Grandpappy Point Marina about 2026 Hans Christian 41T

132 Grandpappy Drive, Denison, TX, 75020

Sign in

or
Login with Google

Check your inbox

We sent a magic link to your email address. Follow the magic link to finish signing in.