2010 Nitro Z-7 Boat in Ellington, CT 06029 US
Built in 2010
Z-7
1 Engine (--)
19 feet
Gas
Fiberglass/Reinforced
top 3 features of the 2010 Nitro Z7 are:Rapid Planing System (RPS) Transom: This advanced hull design channels water efficiently to drastically reduce bow rise. It allows the boat to achieve incredibly fast hole shots, getting the vessel completely on plane in under four seconds.Removable Port Console: The boat features a modular dual-console design. Anglers can securely install the second console to protect passengers from harsh wind and spray, or quickly remove it in five minutes to open up the cockpit floor space on tournament days.Tournament-Ready Tackle and Rod Management: Despite its compact 18-foot 8-inch frame, the bow features an ultra-wide casting deck. It is fully optimized with dual 8-foot gas-assisted rod lockers and a massive central storage system specifically molded to fit Plano 3700 tackle boxes.
Price History
| Date | Event | Price |
|---|---|---|
| 8/18/26 | Initial price | $17,999 |
2010 Nitro Z-7 Video Tours
Nitro Z-7: BoatTEST Review
Overview
The Nitro Z7 is a versatile bass boat designed to deliver both performance and comfort for serious anglers. Measuring 18 feet 8 inches in length overall with a 94-inch beam and a shallow 15-inch draft, the Z7 is capable of accessing skinny water with ease. It features a 16-degree variable dead rise hull and is offered with a standard 150 horsepower Mercury Pro XS outboard, rated up to 175 horsepower, providing a balance of power and efficiency. The boat is available in single or dual console configurations, with the dual console being easily removable to suit different fishing preferences.
Fishing Features and Deck Layout
The Z7 offers spacious casting decks at both the bow and stern, allowing anglers to move freely even with pedestal seats installed. These seats are positioned at a comfortable height and are supported by gas struts for ease of use. Central to the deck is a 32-gallon aerated and divided livewell equipped with a 500-gallon Brouwer recirculating pump and an aerator timer, featuring rounded corners for improved water flow. Courtesy lights are conveniently controlled directly at the light fixtures, eliminating the need to search for switches at the helm. The foredeck houses a recessed well for the foot control of the standard Minn Kota 42-inch shaft trolling motor, which delivers 70 pounds of thrust and includes a directional arrow for intuitive heading control. Optional trolling motors with shafts up to 52 inches and thrusts up to 80 pounds are also available. Rod storage is ample, with lockable compartments beside the passenger seat and under the forward casting deck, capable of holding rods up to eight feet. Bungee cords at the bow secure rods during transit. Additional removable storage bins flank the aft casting deck, complemented by an insulated cooler and a trash receptacle with molded finger cutouts for easy handling. The foredeck also features dedicated dry storage and a designated spot for the navigation light.
Operational Features and Helm
The Z7’s helm is thoughtfully designed for both comfort and functionality. It includes three-across seating with steps between seats, an improvement over previous models that required stepping on a folded center seat. The helm panel features a master power switch and white-faced gauges with chrome bezels, including a standard Lowrance Mark V FX Pro fishfinder. Rocker switches for the livewell aerator and recirculating pump are conveniently located to the right of the leather-wrapped, tilt-mounted three-spoke steering wheel. Flip-up cleats reduce snag hazards, and a reboarding step is positioned on the port side. The wiring harness is neatly channeled to the Mercury Optimax engine, with onboard storage for three batteries and the oil tank, which can be optionally equipped with a remote fill system. The dual console option can be removed via three attachment points, providing flexibility in layout.
Power and Performance
Powered by a 150 horsepower Mercury Pro XS outboard, the Nitro Z7 demonstrated impressive performance during testing. With an estimated test weight of 2,624 pounds, including half fuel and two passengers, the boat reached a top speed of 62 miles per hour at 5,600 RPM, consuming 13.75 gallons per hour for a range of approximately 166 miles. Its optimal cruise speed was identified at 28.4 miles per hour at 3,000 RPM, reducing fuel burn to 3.9 gallons per hour and extending range to 268 miles over 9.5 hours. The rapid planing system enabled a quick time to plane of 3.3 seconds, with acceleration milestones of 20 mph in 5 seconds, 30 mph in 7.4 seconds, 40 mph in 11.6 seconds, and 50 mph in 17.5 seconds. The boat exhibits a 10-degree bow rise during acceleration, which can be trimmed to achieve a smooth running pad with minimal spray. The hull’s design minimizes chine walking at high speeds, even in choppy conditions, with responsive steering allowing quick corrections. The windscreen effectively deflects wind off the operator’s face, although removing the port console increases cockpit space at the expense of wind protection for the passenger.
Conclusion
The Nitro Z7 stands out as a well-built, comfortable, and highly maneuverable bass boat. Its combination of thoughtful fishing features, efficient powertrain, and refined handling make it a strong contender in its class. The boat’s aesthetic appeal is enhanced by multiple standard and optional color packages, and it comes standard with a powder-coated, color-matched single-axle trailer equipped with 14-inch wheels. Overall, the Z7 offers anglers a capable platform that balances performance with practical fishing amenities.
Overview from around the web 2010 Nitro Z-7
The 2010 Nitro Z-7 has received a variety of positive reviews from boat enthusiasts and anglers alike
Many customers appreciate its exceptional performance on the water, highlighting the responsive handling and stability, even in choppy conditions. The powerful Merc 150 OptiMax engine is often noted for delivering impressive speed, making it a favorite for those who enjoy fast-paced fishing. The spacious layout of the Z-7 is also frequently praised, with ample storage options for rods, tackle, and gear, which is essential for serious anglers. The comfortable seating and well-designed cockpit enhance the overall experience, allowing for long days on the water without discomfort. Additionally, users love the attention to detail in the design, from the sleek aesthetics to functional features like the aerated livewell, which helps keep catches alive. The Nitro Z-7 has proven to be a reliable choice for both novice and experienced boaters, making it a popular option in the fishing boat market. Overall, the 2010 Nitro Z-7’s combination of performance, comfort, and practicality has garnered a loyal following among fishing enthusiasts who value quality and efficiency on the water.
Made For
The 2010 Nitro Z-7 is designed for avid anglers and fishing enthusiasts who seek a versatile and high-performance boat. Ideal for both freshwater and saltwater environments, this boat is perfect for those who enjoy bass fishing, as well as other types of sport fishing. The Z-7 offers a blend of stability, speed, and maneuverability, making it suitable for seasoned fishermen looking for a reliable vessel, as well as novice anglers eager to enhance their fishing experience. With ample storage for gear, comfortable seating, and innovative features, the Nitro Z-7 caters to anyone looking to make the most out of their time on the water.
Be the first to know when similar boats hit the market
Get notified when new boats become available
Boats For Sale in Connecticut, United States Similar to the 2010 Nitro Z-7
Compare with similar boats and find the perfect one for you.
 2010 Nitro Z-7 | ||||||
|---|---|---|---|---|---|---|
| Price | $17,999 | $29,995 | $35,899 | $36,240 | $39,995 | $40,899 |
| Location | Ellington | Norwich | Bridgeport | East Hartford | Norwich | Bridgeport |
| Nominal Length | 19' | 18' | 17' | 17' | 20' | 19' |
| Engine Make | - | - | MERCURY MARINE | MERCURY MARINE | - | MERCURY MARINE |
| Total Engine Power | - | - | 115 hp | 115 hp | - | 150 hp |
| Days on Market | 17 | 230 | 317 | 6 | 228 | 562 |
| Get in touch |
Other Nitro boats for sale in Connecticut, United States
Meet the Broker
Address
Boat Location
Contact Lee's Auto and RV about 2010 Nitro Z-7
171 West Rd, Ellington, CT, 06029
Login with Google