2025 Mako 24 APEX
$126,899
$700
Boat in Houston, TX 77047 US
Built in 2025
24 APEX
1 Engine (MERCURY MARINE)
24.7 feet
Gas
Fiberglass/Reinforced
The all-new MAKO® 24 Apex is here, slicing through waterways with a brand-new, performance-focused Next Generation Hull. Load up everything you need in its streamlined deck's gear-organization solutions, including lockable gull-wing 8' rod boxes, plenty of head storage, and more. Once you've found somewhere to cast a line, post up at the available fiberglass leaning-post bait station complete with a 30-gal. baitwell. The aft release well and bow in-step livewell round out this boat's fishing-trip readiness. When it's time to head back to shore to celebrate, hop in the central jump seat, engage the digital throttle, and get there faster with up to 400hp of get-up-and-go power. After?experiencing the Apex, it's difficult to bring yourself back down.
Additional Details
- Length:24' 8"
- Beam: 8' 3"
- Bottom Width: 6' 3"
- Max. Recommended HP: 400 HP
- Fuel Capacity: 82 gal.
- Max. Person Capacity: 10 persons
- Max. Person Weight: 1500 lbs.
- Max. Person, Motor & Gear Weight: 2810 lbs.
- Interior Depth: 19"
- Transom Height At Center Line: 25"
- Deadrise: 15 degrees
- Draft: 15"
- Average Dry Weight: 3300 lbs.
- Average Hull Weight: 2600 lbs.
- Average Package Weight: 4850 lbs.
- Package Height: 9' 3"
- Storage Length: 34' 6"
Certification & Safety
- Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
- NMMA® certified
- Factory leak tested for hull, plumbing & fitting integrity
- Integrated emergency ladder in transom
- Horn
Console
- Acrylic windscreen
- Stainless steel steering wheel w/knob
- Tilt hydraulic steering
- Mercury® SmartCraft® digital gauges
- Binnacle-mounted digital throttle & DTS shift controls
- Easy access to helm electronics, instruments & switches
- Forward-console seat
- Integrated footrest
- Extra-large electronics mounting surface
- Drink holder
- 12V DC & 5V USB charging outlets
- 6 flush-mounted console rod holders
Head
- Front-facing door provides easy access to head compartment
- Head enclosure/storage space w/stainless steel latch
- Wiring access hatch & battery access
- Main distribution panel & fuse block inside head
- Courtesy light
Leaning Post
- Powdercoated aluminum leaning post
- Helm seat w/flip-up leg rolls
- Slide-out 65-qt. (61.51 L) cooler underneath
- Rod holders
Interior
- Anchor locker
- 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
- White powdercoated rails
- Forward 19-gal. (71.92 L) baitwell
- Bow 210-qt. (198.73 L) insulated fishbox
- Bow rod lockers for storage of up to 12 rods
- Aft 16-gal. (60.57 L) baitwell
- Aft folding jumpseat
- Yacht-style non-skid surfaces throughout
- Bilge access under aft jumpseat
- Side coaming bolsters
- Four 6" (15.24 cm) polished marine-grade stainless steel cleats
Performance
- Legendary dry-riding MAKO® hull
- Performance lifting strakes
- 8" (20.32 cm) Bob's Machine Shop® hydraulic jack plate
- Factory-matched stainless steel propeller
- Power steering standard w/all motors
Construction & Exterior
- Color: MAKO® Bone White gelcoat
- 100% composite construction
- Coosa® Bluewater 100% composite transom core
- Heavy-duty, fiberglass-encapsulated transom w/1.5" (3.81 cm) fiberglass-impregnated, high-density composite core
- Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
- 1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish
- Closed-cell foam-injected stringer grid for USCG-approved flotation
- Premium marine-grade stainless steel hardware & fasteners for corrosion resistance
- Closed-molded hatch covers w/finished undersides & integrated gaskets
- Heavy-duty rub rail
Electrical, Mechanical & Plumbing System
- High-speed raw water intake
- USCG-compliant navigation lights
- 4 cockpit courtesy lights & 1 head light
- Interior courtesy lights
- TRACKER® Lithium WRM100 cranking battery
- Marelon® corrosion-free seacocks on all below-water thru-hull fittings
- Heavy-duty electrical switching system
- Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment
Trailer
- Custom tandem-axle trailer
- NMMA® & NATM certified
- DOT approved
- Tandem-axle brakes
- 15" (38.1 cm) galvanized wheels w/balanced tires
- Torsion axle suspension
- Knott lubed hubs
- Galvanized steel components
- Heavy-duty winch w/nylon strap & safety strap
- Dual wheel tongue jack
- Frame step
- LED lighting
- PVC loading guides
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
Price History
| Date | Event | Price |
|---|---|---|
| 2/4/26 | Price decreased | $126,899(-0.5%) |
| 12/31/25 | Price decreased | $127,599(-2.2%) |
| 7/19/25 | Initial price | $130,450 |
Videos from Bass Pro Boating Center | Pearland, TX on this 2025 Mako 24 APEX
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Boat Location
Contact Bass Pro Boating Center | Pearland, TX
1000 Bass Pro Drive, Pearland, TX, 77047
Login with Google
