2019 Mako 184 CCSold
$29,999
Boat in Hudson, FL 34669 US
Built in 2019
184 CC
1 Engine (MERCURY)
18.3 feet
Gas
Fiberglass/Reinforced
2019 Mako 184 CC powered by an American made Mercury 150 Four Stroke with ONLY 122 Hours! This boat with max rated HP is well equipped with a bimini top, GARMIN 74cv ECHOMAP Fishfinder/Chartplotter and stainless steel prop!
Unreel boats come with a completed 100 hour service, complete systems check and brand new battery to ensure you are ready for the water!
TRAILER INCLUDED!! IT'S UNREEL!!
The compact yet deadly MAKO® 184 CC is built tough for fishing and fun, whether you're chasing offshore game or just cruising the islands with the family. Anglers will appreciate the under-gunnel rod storage and the 21-gal. baitwell. And families will love the cushioned forward console seat and the molded-in swim platforms. The hull/deck joint is chemically sealed and bonded 360°, plus it's mechanically fastened every 6" with stainless steel fasteners. The chop-taming, aggressive Deep V hull allows it to brave rougher conditions with confidence, and the wide beam contributes to safety and stability at rest.
- Backed by the MAKO® Assurance 5+Life-the best factory warranty in the business
- Foam-injected hull w/1-piece fiberglass stringer grid
- Hull/deck joint chemically bonded & fastened 360° w/316 stainless steel fasteners
- Self-bailing cockpit w/non-skid deck surface
- Under-gunnel port & starboard rod racks
- Center console w/analog gauges, electronics mounting surface, stainless steel grab rail, acrylic windscreen & storage
- 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
- 2 pedestal helm seats & forward console seat w/21-gal. (80 L) baitwell
- Port & starboard bow seats w/64-qt. (61 L) insulated fishboxes w/drains below
- Custom-matched, tandem-axle aluminum trailer w/brakes
- Length:18' 4"
- Beam: 8' 2"
- Bottom width: 6' 8"
- Max. recommended HP: 150 HP
- Fuel capacity: 53.5 gal.
- Max. person capacity: 5 persons
- Max. person weight: 965 lbs.
- Max. person, motor & gear weight: 1727 lbs.
- Interior depth: 23"
- Transom height at center line: 25"
- Deadrise: 18 degrees
- Draft: 12"
- Dry weight: 2255 lbs.
- Average hull weight: 1800 lbs.
- Average package weight: 3055 lbs.
- Package height: 8' 6"
- Package height w/T-top or hardtop: 9' 10"
- Storage length: 25' 7"
Certification & Safety
- Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
- NMMA® certified
- Factory leak tested for hull, plumbing & fitting integrity
- Stainless steel hardware & fasteners for corrosion resistance
- CorrosionX stainless spray treatment included
- Horn
Console
- Binnacle-mounted motor control
- Gauge panel w/analog gauges
- Heavy-duty electrical switching system w/battery selector switch(es)
- Easy access to helm electronics, instruments & switches
- Forward-console seat w/21-gal. (80 L) baitwell
- Integrated full-width footrest
- Acrylic windscreen
- Marine-grade tinned wiring w/submersible connectors
- 2 console drink holders
Construction & Exterior
- 100% composite construction
- Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
- 1-piece molded fiberglass stringer grid w/integrated transom knee supports
- Closed-cell foam-injected stringer grid for USCG-approved flotation
- Premium marine-grade stainless steel hardware
- Heavy-duty rub rail & insert
- Closed-molded hatch covers w/finished undersides & integrated gaskets
- Aluminum backing plates for cleats, chocks & hinges
- Reboarding step & stainless steel grab handle
- MAKO® Bone White gelcoat
Electrical, Mechanical & Plumbing Systems
- USCG-compliant navigation lights
- Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment
Interior
- Anchor locker
- Foredeck dodger mounting boss
- Port & starboard bow seats w/64-qt. (61 L) fishboxes w/gravity overboard drainage
- Low profile stainless steel bow rails
- 2 pedestal helm seats w/slide & swivel
- Self-bailing cockpit
- 2 gunnel-mounted rod holders
- Port & starboard under-gunnel rod racks for 4 rods
- Molded non-skid surfaces throughout
- Bilge access hatch
- Port & starboard molded-in swim platforms
- Four 6" (15.24 cm) polished marine-grade stainless steel cleats
Performance
- Legendary dry-riding MAKO® hull
- Aggressive deep V hull design
- Performance lifting strakes
- Factory-matched propeller
T-Top or Hardtop
- .25" (.64 cm) aluminum backing-plate reinforcement for T-top mounting
Trailer
- Tandem-axle EZ Loader® aluminum trailer
- NMMA® certified trailer
- DOT approved
- Tandem-axle brakes
- 13" (33.0 cm) radial tires w/galvanized V5 wheels & galvanized axle
- Oil bath hubs
- Leaf spring suspension
- Heavy-duty winch w/nylon strap & safety strap
- Stainless steel hardware
- Galvanized steel components
- LED lighting
- PVC loading guides
- Composite fenders
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
2019 Mako 184 CC Video Tours
Overview from around the web 2019 Mako 184 CC
Customers praise the 2019 Mako 184 CC for its versatility and performance
Many highlight its excellent handling and stability, making it ideal for both inshore fishing and family outings. The spacious center console layout offers ample storage and comfortable seating, enhancing the overall boating experience. Users also appreciate the quality construction and reliable Yamaha engine, noting that the boat delivers great value for its price point. Overall, owners commend the 2019 Mako 184 CC for combining fishing functionality with everyday usability.
The Biggest Pros and Cons
The 2019 Mako 184 CC offers a range of advantages and a few considerations to keep in mind:
Pros
Versatile Center Console Design: Provides ample space for fishing, cruising, and family outings.
Durable Construction: Built with high-quality materials for longevity and reliable performance.
Efficient Layout: Smartly designed storage compartments and rod holders enhance convenience on the water.
Performance: Powerful engine options deliver excellent speed and handling.
Comfort Features: Includes comfortable seating and a user-friendly helm with modern instrumentation.
Cons
Limited Cabin Space: As a center console model, it lacks enclosed cabin amenities.
Fuel Capacity: May require frequent refueling on longer trips due to moderate fuel tank size.
Price Point: Positioned at a premium price compared to some competitors in the same size range.
Made For
The 2019 Mako 184 CC is perfect for anglers and boating enthusiasts who want a versatile, reliable center console boat. It's designed for those who enjoy inshore and nearshore fishing, offering a spacious deck layout, durable construction, and plenty of storage for gear. Whether you're a seasoned fisherman or just starting out, this boat provides a comfortable and efficient platform for a day on the water.
Finance your dream boat!
Finance your dream boat!
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Boat Location
Contact UnReel Marine about 2019 Mako 184 CC
12020 Hicks Rd, Hudson, FL, 34669
Contact UnReel Marine
12020 Hicks Rd, Hudson, FL, 34669
Login with Google
