1984 Islander 28 IslanderSold
$7,900
Boat in Gilford, NH 03249 US
28 Islander
1 Engine (Yanmar)
28 feet
Diesel
Fiberglass/Reinforced
PRICE REDUCED
A LOT OF BOAT FOR THE PRICE
This Islander 28 has been here in our yard for many years, well maintained, and is in very good condition.
1984 28 Islander Yachts Incorporated. "Music" is in Good Condition. The boat is very clean and presents This boat is a well know design, with great sailing characteristics. The boat has a roomy V birth, enclosed head, with a traditional interior. The interior is also in good condition, and shows nicely. The pictures do represent the boat well.
The boat is currently stored in our yard, on stands. The mast is up and rigged, and the boat can be viewed
A Perry designed boat that has nice lines, and sails as well as it looks.
Length
27' 11"
Sail Area
361 sq. ft. - 145 Main - 216 Jib
Beam
9' 10.5"
Hull Speed
6.44 knots
Length at Waterline
23' 1"
Performance Handicap
PHRF = 210 (Standard) 201 (Bahama)
Draft
5' 0" (Standard) 5' 6" (Bahama)
Capsize Formula
CSF = 2.07
Displacement
7,000 pounds
Mast Height
36' 9.5" Aluminun by Kenyon
Hull Type
Hour Glass Chine
Boom Length
10' Aluminun by Kenyon
Rig Type
Sloop (Bermuda)
Mainsail Luff
31' 2"
Ballast/Delta
.43 (Stiff)
Mainsail Foot
9' 2"
Displacement Length
D/L = 255 (Medium)
Bridge Clearance
41' 0"
Keel
Fin - 3000 lbs lead
Fuel Tank
20 gallon Aluminum
Rudder
Spade w/partial skeg - 1.5" 316 SS shaft
Clean Water Tank
20 gal. (1970's) 24 gal. (1980s)
Hull and Deck
FRP Fiberglass Reinforced Plastic
Waste Water Storage
15 gal. (1970s) 18 gal. (1980's)
Auxiliary Power
Inboard • 30HP Gas & 15 HP Diesel
Winches
5 - 2 30As and 3 8As
Reductuion Gear
2.62:1 Kanzaki
Blocks
Schaefer
Shaft
3/4" x 42" Aguamet 22
Interior
Modular Teak
Propeller
2 Blade 13" Dia. x 10" Pitch • RH 3/4" ID
Designer
Rober H. Perry
Beam: 9.10
Max Draft: 5.0
Displacement: 7000
1984 Yanmar 2GM
Total Power: 13/HP
Fuel: 25
Holding: 25
2016 Dacron Mainsail w/ two reefs, 2016 135% Genoa in good condition, 2020 Reacher in verygood condition,
- Harken Roller furling
- 2 primary self tailing winches
- 2 secondary halyard winches mounted on mast
MAIN CABIN
• Teak bulkheads, furniture and joiner work
• Deluxe fabric, thick foam settee cushions
• Varnished teak and holly sole
• Teak grab rails below fixed ports
• Large storage area behind both settees
• Foldaway wooden table with Formica surface
• Fold-out double berth on starboard side
• Single berth port side
• Large quarter berth to starboard with light
• Headliner with zippers for access to deck hardware
• Opening plexiglass hatch above table
• Lights above both settees
• Companionway light separate from main panel
• Storage behind and below both settees
• Large storage areas below quarter berth
• Four large fixed ports for good interior lighting
GALLEY
• 3.2 cubic foot insulated ice box with light, shelf and drain
• Deep stainless steel sink with foot pump and faucet
• Dish locker with separators and cane sliding doors
• 2 burner gimbaled alcohol cooking stove - by Hillerange
• Two drawers and two door storage areas
• Formica counters
• Brass towel hooks
FORWARD CABIN
• Two large teak drawers
• 6’ 6” V-berth length
• Access door to chain locker
• Two opening, screened ports
• Opening, tinted plexiglass hatch
• Extra large storage areas under V-berth
• Comfortable cushions with deluxe fabric
• V-berth filler cushion
• Dual adjustable lights with independent switches
• Privacy curtain to head compartment
• High quality soft padded headliner
• Plugged and sanded teak strips on hull sides
HEAD COMPARTMENT
• Manual head with storage shelf behind
• Clothing hanging bar • Two lights
• Two opening, screened ports
• Teak grate drain in floor
• Lockable teak privacy door
DECK
• Anchor locker with overboard drain
• Extra large self-draining cockpit
• Four ports
• Fiberglass sliding companionway hatch with sea hood
• Tinted translucent forward hatch
• One cockpit seat locker hatch with locking hasp and storage
• Cockpit coaming lockers
• Laminated wood tiller
• Oiled teak exterior joiner work and hand rails
• Molded non-skid surfaces
• Companionway hatch board storage
EXTERIOR & DECK HARDWARE
• Stainless steel stem head fitting incorporating an anchor roller
• Bow and stern rails with single lifelines and stanchions
• Boarding gates port and starboard
• Swim ladder incorporated into stern rail system
• Full-length, anodized alloy toe rails sealed and bolted every
4 inches through an overlapping hull-to-deck joint
• Two each: bow and stern mooring cleats
• Two bow mooring chocks
• Inboard Genoa tracks with lead blocks
• Inboard genoa track w/fairlead blocks
• Full length anodized toerail w/aperatures for sheeting blocks
• Genoa blocks for apertures in toerails
• Mid-boom roller bearing adjustable mainsheet traveler
• 2 bow and 2 stern mooring cleats
• Laminated wood tiller
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Price History
| Date | Event | Price |
|---|---|---|
| 7/7/25 | Price decreased | $7,900(-27.5%) |
| 6/28/25 | Initial price | $10,900 |
1984 Islander 28 Islander Video Tours
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker

Address
Boat Location
Contact Fay's Boat Yard, Inc.
1970 Lake Shore Rd., Gilford, NH, 03249





















