1/110
1980 Custom Navigateurs J.E.L. Custom 37'
$39,900
Boat in Green Cove Springs, FL 32043 US
Navigateurs J.E.L. Custom 37'
1 Engine (Nanni Marine)
37 feet
Diesel
Fiberglass/Reinforced
Stock #441946
Video of this vessel available at www.popsells.com/view/441946
Reason for selling is "Quitting Sailing".
ANY and ALL offers will be put in front of our seller! Submit your offer today!
Custom Built! Bilge Keel! Extremely Stable Bluewater Sailer!
An experienced island hopper ready to take you on your next great adventure. This is not your usual assembly line, "Tupperware" boat. This custom-built bluewater sailer, with a bilge keel, is an impressive cruiser even when the weather turns ugly.
This is a cutter rigged boat with an extruded aluminum keel stepped mast and an extruded aluminum boom. There is a Profurl roller furling unit on the headstay and a Facnor LS130 furling unit on the cutter stay.
The sail inventory includes a mainsail, a 100% jib, a staysail, a storm jib, and a gale sail. All are serviceable with slides and bindings intact.
There are six (6) two-speed Lewmar winches and (2) single speed Lewmar winches. All in good working order.
While not under sail, the boat is powered by a naturally aspirated Nanni 50 HP diesel engine driving a Sauer Danfoss hydraulic drive pushing a 1-1/4" stainless steel shaft and a three-bladed bronze 19 x 16 prop. There is also a newer PSS shaft seal.
Ground tackle includes a 40kg Rocna anchor with 150 ft of 3/8" chain, a 45 lb CQR with 150' of 3/4' rode, and an additional emergency anchor. There is also a Lofrans Tigres 1500W electric windlass.
Nav electronics include two VHF radios (1 mounted, 1 handheld), Raymarine C-95 24 mile radar-plotter-depth finder, AIS transponder with GPS, Furuno Nav-500 autopilot (hydraulic drive), DST 800 speedlog, and a Galaxy Aquameter compass.
Electrical systems are charged via the high amp alternator, one 250 watt solar panel and one 100 watt orientable solar panel with a Blue Sky Solar-Boost 3024i controller, and a wind generator.
Electrical storage includes 1 Lifeline 12v GR24 AGM battery (engine), and 4 ROLLS 225 Amp hr AGM 6v (house).
Below, the accommodations include a forward cabin that has a V-berth, aft to port is the enclosed head, and to starboard are storage lockers. Continuing aft there is the main salon with a settee to Port, followed aft by the U-shaped galley. To starboard there is a convertible settee followed aft by the navigation station and then the quarter berth.
Interior finishes include Marine and teak plywood with solid teak trim, and some formica and painted surfaces. The cabin sole is plywood with teak and holly veneer overlay.
The current owner's father had this boat custom built. So, she has been lovingly cared for by the same family her entire life. She is ready to take you and your family on exciting new adventures. Don't miss the opportunity to own this one of a kind - and extremely competent - sailer.
While we will always attempt to provide you with a TRUE representation of every vessel we market, during any purchase from Pop you will be encouraged to schedule an inspection from an independent, accredited surveyor and every purchase WILL ALWAYS BE subject to your satisfaction with the results from your independent survey and your own personal trial run.
We have several more Chris-Craft, Sea Ray, Gibson, and Carver vessels for sale. If you're in the Jacksonville, Gainesville, Palatka, or Palm Coast areas, please contact us to let us know what you're looking for and we'll get back with you today about any other cutter sailboat options we have locally that may meet your needs.
You have questions? We have answers. Call us at (941) 538-7803 to discuss this vessel today.
Video of this vessel available at www.popsells.com/view/441946
Reason for selling is "Quitting Sailing".
ANY and ALL offers will be put in front of our seller! Submit your offer today!
Custom Built! Bilge Keel! Extremely Stable Bluewater Sailer!
An experienced island hopper ready to take you on your next great adventure. This is not your usual assembly line, "Tupperware" boat. This custom-built bluewater sailer, with a bilge keel, is an impressive cruiser even when the weather turns ugly.
This is a cutter rigged boat with an extruded aluminum keel stepped mast and an extruded aluminum boom. There is a Profurl roller furling unit on the headstay and a Facnor LS130 furling unit on the cutter stay.
The sail inventory includes a mainsail, a 100% jib, a staysail, a storm jib, and a gale sail. All are serviceable with slides and bindings intact.
There are six (6) two-speed Lewmar winches and (2) single speed Lewmar winches. All in good working order.
While not under sail, the boat is powered by a naturally aspirated Nanni 50 HP diesel engine driving a Sauer Danfoss hydraulic drive pushing a 1-1/4" stainless steel shaft and a three-bladed bronze 19 x 16 prop. There is also a newer PSS shaft seal.
Ground tackle includes a 40kg Rocna anchor with 150 ft of 3/8" chain, a 45 lb CQR with 150' of 3/4' rode, and an additional emergency anchor. There is also a Lofrans Tigres 1500W electric windlass.
Nav electronics include two VHF radios (1 mounted, 1 handheld), Raymarine C-95 24 mile radar-plotter-depth finder, AIS transponder with GPS, Furuno Nav-500 autopilot (hydraulic drive), DST 800 speedlog, and a Galaxy Aquameter compass.
Electrical systems are charged via the high amp alternator, one 250 watt solar panel and one 100 watt orientable solar panel with a Blue Sky Solar-Boost 3024i controller, and a wind generator.
Electrical storage includes 1 Lifeline 12v GR24 AGM battery (engine), and 4 ROLLS 225 Amp hr AGM 6v (house).
Below, the accommodations include a forward cabin that has a V-berth, aft to port is the enclosed head, and to starboard are storage lockers. Continuing aft there is the main salon with a settee to Port, followed aft by the U-shaped galley. To starboard there is a convertible settee followed aft by the navigation station and then the quarter berth.
Interior finishes include Marine and teak plywood with solid teak trim, and some formica and painted surfaces. The cabin sole is plywood with teak and holly veneer overlay.
The current owner's father had this boat custom built. So, she has been lovingly cared for by the same family her entire life. She is ready to take you and your family on exciting new adventures. Don't miss the opportunity to own this one of a kind - and extremely competent - sailer.
While we will always attempt to provide you with a TRUE representation of every vessel we market, during any purchase from Pop you will be encouraged to schedule an inspection from an independent, accredited surveyor and every purchase WILL ALWAYS BE subject to your satisfaction with the results from your independent survey and your own personal trial run.
We have several more Chris-Craft, Sea Ray, Gibson, and Carver vessels for sale. If you're in the Jacksonville, Gainesville, Palatka, or Palm Coast areas, please contact us to let us know what you're looking for and we'll get back with you today about any other cutter sailboat options we have locally that may meet your needs.
You have questions? We have answers. Call us at (941) 538-7803 to discuss this vessel today.
Nominal Length
37ft
Length Overall
37ft
Beam
10.33ft
Max Draft
5.83ft
Dry Weight
32000lb
Fresh Water Tanks
90gal
Fuel Tanks
50gal
Hull Material
fiberglass
Hull Shape
bilge-keel
Engine 1
Engine Make
Nanni Marine
Engine Model
N4.50
Total Power
50hp
Engine Hours
2000
Engine Type
Inboard
Fuel Type
diesel
Drive Type
direct
Anchor
✓
Anchor Locker
✓
Anchor Rode
✓
Bimini
✓
Bow Pulpit
✓
Bow Rail
✓
Cleats Fixed
✓
Cockpit Seating
✓
Fridge Cockpit
✓
Non Skid Deck
✓
Propane Tanks
✓
Self Bailing Cockpit
✓
Steering Wheel
✓
Swim Ladder ( Stern )
✓
Swim Platform
✓
Transom Closed
✓
Cabin Lighting
✓
Cabinets
✓
Composting Toilet
✓
Hanging Locker
✓
Head
✓
Heat
✓
Port Holes
✓
Pressurized Water System
✓
Refrigerator
✓
Salon
✓
Settee
✓
Shower
✓
Sink Galley
✓
Stove / Oven
✓
V Berth
✓
Window Treatments
✓
110v Ac Outlets
✓
12 V Dc Outlets
✓
Ac Electric Panel
✓
Battery Switch
✓
Courtesy Lights
✓
Shore Power
✓
Solar Panel
✓
Stereo
✓
Tachometer
✓
Water Heater
✓
Backstay
✓
Blocks
✓
Boom
✓
Chain Plates
✓
Forestay
✓
Lifelines
✓
Mast
✓
Rigging Hardware
✓
Running Rigging
✓
Sheet Roller Cars
✓
Standing Rigging
✓
Traveler
✓
Winches Manual
✓
Covers Sail
✓
Dodger
✓
Downhaul
✓
Main Sail
✓
Storm Jib
✓
Rudder
✓
Throttle/shift: Mech
✓
Water Tanks
✓
Whale Tail
✓
Ais System
✓
Autopilot
✓
Compass
✓
Gps / Plotter
✓
Masthead Light:
✓
Navigation Lights
✓
Radar Dome
✓
Separate Depth Sounder
✓
Vhf
✓
Vhf Antenna
✓
Emergency Tiller
✓
Engine Kill Switch
✓
Grab Rails
✓
Bottom Paint Antifouling
✓
Tagline
Custom Built! Bilge Keel! Extremely Stable Bluewater Sailer!
Condition detail
This is a sailor's sailboat. Mechanically and operationally she appears well cared for. According to the seller, all mechanical and operational systems function as intended.
Cosmetically, finishes appear "as expected" given the age of the vessel. Cushions and fabrics reflect good care and normal wear and tear for a vessel of this age.
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated.
Selling reason
Quitting Sailing
Dinghy detail
COABM51021D020 AB 10' RIB
Price History
| Date | Event | Price |
|---|---|---|
| 1/26/26 | Price decreased | $39,900(-11.1%) |
| 8/10/25 | Price decreased | $44,900(-10.0%) |
| 6/16/25 | Initial price | $49,900 |
Videos from Pop Yachts on this 1980 Custom Navigateurs J.E.L. Custom 37'
1980 Custom Navigateurs J.E.L. Custom 37' Video Tours
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker

Address
5717 Bessie Drive
Sarasota, FL 34233
Boat Location
Contact Pop Yachts
5717 Bessie Drive, Sarasota, FL, 34233








































































































































